220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD inverter
$190.34
Voltage and Power Watts 380V 2.2KW / Voltage and Power Watts 380V 1.5KW / Voltage and Power Watts 220V 2.2KW / Voltage and Power Watts 220V 1.5KW /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
220V 1.5KW / 220V 2.2KW / 380V 1.5KW / 380V 2.2KW for Option
Description
220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD Inverter
The VFD can be used for constant torque loads (eg hard start:air compressor, HVAC unit) and variable torque loads
(eg pumps, fans, etc.).
It can be used as a motor speed control and phase converter. The input to this VFD is 1 or 3 depending on your preference.
When you use this VFD, you can control different speeds as needed.
Can be used:lathes, milling cutters, car hoists, pumps and conveyors, etc., and then perform well. The project uses a sine wave PWN (SPWM) as the control system for excellent performance.
Features
1) PID control; advanced calculus PID closed-loop algorithm, fast response and strong adaptability;
2) Simple PLC function can realize 16 speed and inverter control function;
3) RS485 communication port, using standard international MODBUS main circuit control;
4) It has strong anti-interference ability;
5) Low output torque 0.5HZ-150%, low speed running capacity;
6) Carrier adjustable 16KHZ, completely silent working environment;
7) Wide voltage working area, 304V-456V normal operation;
8) Automatic voltage regulation (AVR) technology to ensure inverter load capacity;
9) Synchronous and non-synchronized various control technologies to dynamically achieve fast start without changing the brake;
10) It has perfect error protection and short-circuit protection protection;
Tech parameters:1) Input voltage:220V (+/- 15%) / 380V (+/- 15%).
2) Output voltage:220VAC or 380VAC
3) Input frequency:48 – 63 Hz
4) Output frequency:0 – 500Hz
5) Input phase:1 phase or 3 phase (220V is 1 phase, 380V is 3 phase)
6) Output phase:1 or 3 phases (220V for 1 or 3 phases, 380V for 3 phases)
Specification
Inverter Series:WK-9000/NF-9000
Control Mode:SPWM
Input Power:330~440Vfor 380V power; 170~240V for 220V power
5 Digits Display & Status Indicator Lamp:Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication Control:RS-485
Operation Temperature:-10~40℃
Humidity:0-95% Relative Humidity(without dew)
Vibration:Below 0.5G
Protection Functions
:Overload Protection:Electronic relay protection motor
Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
FUSE Protection:FUSE broken, Motor stops.
Over-voltage:DC Voltage >400V for 220V class
DC Voltage >800V for 380V class
Low Voltage:DC Voltage
DC Voltage
Instant Stop and Restart:Restarted by frequency track after instantaneous stop.
Stall Prevention:Anti-stall during Acc / Dec run
Output End Shorts:Electronic circuit protecting
Other Functions:Fin over-heat protection, restriction of reverse running,direct start after
power on, fault reset, parameter lock PID,one-drive-more, etc.
Package includes
1 x Variable Frequency Drive VFD Inverter (220V 1.5KW / 220V 2.2KW / 380 1.5KW / 380V 2.2KW for Option:)
Weight | 1.5 kg |
---|
Customers Also Viewed
5pcs TS-300B Turbidity Sensor Detection Module Water Quality Tester Washing Machine Turbidity Transduce
$43.93Sensor & Detector ModuleAdd to cartPrincipleTurbidity sensor TS-300B measures the turbidity (counter of suspended matter) in the wash water. Based on the optical principle, the sensor uses the light-emitting diode and phototransistor to receive the specific wavelength to measure the opacity or other substances of dirty water. concentration. By using phototransistors and light-emitting diodes, the light emitted by the sensor …
3Pcs USB Fan Speed Controller Module Reducing Noise Multi-stall Adjustment Governor DC 4-12V
$20.74Motor PWM Speed ControllerAdd to cartFeatures– USB Fan Air Conditioner – Strong winds and weak wind adjust freely – Stepless Speed Regulation – Suitable for the very common 5.0V USB fan on the market Regulation PrincipleThe non-adjustable fan is a 5V direct fan motor,while the two-stall fan is the interior has a step-up circuit board,when placed in the second gear,the …
5pcs JDY-08 BLE bluetooth 4.0 Serial Port Wireless Module Low Power Master-slave Support Airsync i Beacon
$45.12Smart ModuleAdd to cartFeaturesJDY-08 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, large transmission power is 0db, large transmission distance is 80 meters, TICC2541 chip design is adopted, and users can modify device name by AT command. , service UUID, transmit power, pairing password and other …
ADC Module ADS1100 for Analog Signal Capture Converter Compatible M5StickC ESP32 Mini IoT Development Board Fi
$14.74Converter BoardAdd to cartnull Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, A/D converter. Extremely easy to design with and configure, the ADS1100 allows you to obtain precise …
5pcs Mini MP1584EN DC-DC BUCK Adjustable Step Down Module 4.5V-28V input 0.8V-20V Output
$8.94Power Supply ModuleAdd to cartSpecificationsModel:MP1584Name:DC-DC step-down moduleInput Voltage:4.5V ~ 28VOutput voltage:0.8V ~ 20VOutput Current:3A (Max)Conversion efficiency:96% (maximum)Output RippleSwitching frequency:1.5MHz (highest) typically 1MHzOperating Temperature:-45°C ~ +85°CSize:22mm * 17mm (L * W )Application areas:DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply,etc.Packge included5 x Step Down Module
LILYGO TTGO T-Koala ESP32 WiFi and bluetooth Module 4MB Development Board Based on ESP32-WROOM-32 Micro USB
$26.23Smart ModuleAdd to cartFeatureEspressif official ESP32-WROOM-32 moduleLatest ESP32 version:REV14MB FLASHLithium battery interface, 500mA maximum charging currentCompatible with , MicroPythonDefault firmware:latest MicroPythoTechnical specificationsMicrocontroller:ESP-32Board power supply:(USB) 5VSupport battery:Lipo Battery 3.7VWorking voltage:3.3VFlash:4 MbytesLength:78 mmWidth:27 mmWeight:7.8 gramsPackage includes1 x ESP32 WiFi&bluetooth Broad2 x Pin
Reviews
There are no reviews yet.