220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD inverter
$190.34
Voltage and Power Watts 380V 2.2KW / Voltage and Power Watts 380V 1.5KW / Voltage and Power Watts 220V 2.2KW / Voltage and Power Watts 220V 1.5KW /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
220V 1.5KW / 220V 2.2KW / 380V 1.5KW / 380V 2.2KW for Option
Description
220V/380V 1.5KW/2.2KW Variable Frequency Drive VFD Inverter
The VFD can be used for constant torque loads (eg hard start:air compressor, HVAC unit) and variable torque loads
(eg pumps, fans, etc.).
It can be used as a motor speed control and phase converter. The input to this VFD is 1 or 3 depending on your preference.
When you use this VFD, you can control different speeds as needed.
Can be used:lathes, milling cutters, car hoists, pumps and conveyors, etc., and then perform well. The project uses a sine wave PWN (SPWM) as the control system for excellent performance.
Features
1) PID control; advanced calculus PID closed-loop algorithm, fast response and strong adaptability;
2) Simple PLC function can realize 16 speed and inverter control function;
3) RS485 communication port, using standard international MODBUS main circuit control;
4) It has strong anti-interference ability;
5) Low output torque 0.5HZ-150%, low speed running capacity;
6) Carrier adjustable 16KHZ, completely silent working environment;
7) Wide voltage working area, 304V-456V normal operation;
8) Automatic voltage regulation (AVR) technology to ensure inverter load capacity;
9) Synchronous and non-synchronized various control technologies to dynamically achieve fast start without changing the brake;
10) It has perfect error protection and short-circuit protection protection;
Tech parameters:1) Input voltage:220V (+/- 15%) / 380V (+/- 15%).
2) Output voltage:220VAC or 380VAC
3) Input frequency:48 – 63 Hz
4) Output frequency:0 – 500Hz
5) Input phase:1 phase or 3 phase (220V is 1 phase, 380V is 3 phase)
6) Output phase:1 or 3 phases (220V for 1 or 3 phases, 380V for 3 phases)
Specification
Inverter Series:WK-9000/NF-9000
Control Mode:SPWM
Input Power:330~440Vfor 380V power; 170~240V for 220V power
5 Digits Display & Status Indicator Lamp:Displaying frequency, current, revolution, voltage, counter, temperature,
forward or reserve running, and fault, etc.
Communication Control:RS-485
Operation Temperature:-10~40℃
Humidity:0-95% Relative Humidity(without dew)
Vibration:Below 0.5G
Protection Functions
:Overload Protection:Electronic relay protection motor
Drive(for constant torque 150%/1 min. for the kinds of fan 120%/1min.)
FUSE Protection:FUSE broken, Motor stops.
Over-voltage:DC Voltage >400V for 220V class
DC Voltage >800V for 380V class
Low Voltage:DC Voltage
DC Voltage
Instant Stop and Restart:Restarted by frequency track after instantaneous stop.
Stall Prevention:Anti-stall during Acc / Dec run
Output End Shorts:Electronic circuit protecting
Other Functions:Fin over-heat protection, restriction of reverse running,direct start after
power on, fault reset, parameter lock PID,one-drive-more, etc.
Package includes
1 x Variable Frequency Drive VFD Inverter (220V 1.5KW / 220V 2.2KW / 380 1.5KW / 380V 2.2KW for Option:)
Weight | 1.5 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.