2000W/3000W Suspension Immersion Water Heater Stainless Steel Heating Rod for inflatable Pool Tub Bathtub
$42.51
Power 3000W Plug AU Plug / Power 3000W Plug EU Plug / Power 3000W Plug UK Plug / Power 2000w Plug US Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
2000W/3000W Suspension Immersion Water Heater Stainless Steel For Inflatable Pool Tub Bathtub
Specification
Cable Length:2 Meters
US Plug Power:2000W
Other Plug Power:3000W
US Plug Voltage:110V
Other Plug Voltage:220-250V
Material:Stainless Steel+PP
Features
Ideal for using at home.
This Immersion Heater is quick and safe.
Perfect for heating in the bathtub, bucket etc.
Suspended water heater – life increased by 3 times, more durable.
Sealed design, suspended heat fast -water and electricity separation, more secure.
Instructions
1.First, plastic barrels, bath barrels, bathtubs, swimming pools, fish tanks, barrels, buckets and other containers filled with water. Into the water heater, water level to ensure that the water heater suspended in the water.Water level in more than 25 to 30 cm into the heater. The product will automatically float on the surface, by adjusting the power cord, you can let the heater suspended in the right place.
2.If the container water level is not enough 25 cm, the product can not be suspended in the water, please ensure that the heating pipe must be submerged in the water, the heater can be slightly tilted a little use.If it is inflatable swimming pool or bathtub and other material containers. For safety reasons, you can put a ceramic under the heat pipe to avoid direct contact with the heat pipe.
3.The container is filled with water, put in the heater plug the power head waiting for the heater indicator light, the heat pipe around the distribution of many small bubbles, and began to heat.If the water is large, heated to half of the need to unplug the plug, try the next water temperature.
4.When the water temperature reaches the required temperature, first unplug the plug, wait 20 seconds to take out the heater. You can use water.
Product Maintenance
1.After the initial use, the inside of the wall will be similar to the rust spots. Because the stainless steel tube in the process of making heat pipe, from the straight tube bent into a spiral.
2.Stainless steel surfaces are subject to friction and damage to the protective film. You can use our prepared sandpaper polished to maintain the surface of the product.
3.After use several times, the stainless steel pipe wall will appear white scale, you can use the ball cleaning.
Package included
1 x Suspension Heater
Warning
1.It is forbidden to use water during heating.
2.Stainless steel ball part, must be all inside the water to heat, or will be damaged.
3.Product heating, the human body can not contact with water. To unplug the plug and use water again.
Weight | 0.5 kg |
---|
Customers Also Viewed
MK1 Acrylic Remote Ver. Tony DIY Arc Reactor Lamp Kit Remote Control Illuminant LED Flash Light Heart Set
$70.86Engraving Parts & AccessoriesAdd to cartThe diaplay box and the bracket inchPROOF THAT TONY STARK HAS A HEARTinch is sold separately, please click that:ID:1429112The following chart shows different versions of our ARC reactor DIY model lamp, you can choose your favorite ones.ARC Reactor DIY Model Lamp Version:Please refer toMK1 Acrylic Frame Version:ID:1420733MK1 Aluminum Alloy Frame Version:ID:1434480MK2 Acrylic Frame Version:ID:1434467MK2 Stainless …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V
$10.17Driver ModuleAdd to cartParametersSize:18.5 x 16 mmInput voltage:3-10VSingle H bridge output current:1.5A, can drive 2 dc deceleration motors.Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.Purpose:drive dc motor and 4-wire stepping motor up to 1.5A.InstructionsULT low level is in sleep mode (need to disconnect J2 short welding spot behind the …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10VRead More
M5Stack ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator Development Board
$177.66Smart ModuleAdd to cartIntroductionFACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328 processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with your M5Core.If you up for some classic video game, PyGamer panel plus M5Core …
10pcs 1S 3.7V 4A li-ion BMS PCM 18650 Battery Protection Board PCB for 18650 lithium Battery Double MOS
$13.12Battery Protection ModuleAdd to cartSpecificationsOvercharge detection voltage:4.25 ± 0.05VOvercharge release voltage:4.23 ± 0.05VOver discharge detection voltage:2.45 ± 0.1VUpper limit continuous current:4AOvercurrent detection current:5ACharging voltage:4.2VProduct Size:35 * 4 * 2.2MMIC components:DW01 + 8205A * 2 The main function:Overcharge protection, over discharge protection, short circuit protection, overcurrent protection.Wiring InstructionsB +:Connected to the battery positive.B-:Connected battery negative.P +:For the battery pack output …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$4.04Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
Solar Charge Controller 15A LCD Display Controller Solar Controller for PWM Solar Power Panel Water Pump
$76.94Solar ControllersAdd to cart15A Controller For PWM Solar Panel Water PumpSpecificationMaterial:Acrylonitrile Butadiene Styrene (ABS)Color:BlackSize:14x9x3cmSystem voltage:12N/24V adaptiveUSB output:5V/2ACharging current:15ACharging voltage:13.7VRelease point cutoff voltage:10.7VWorking temperature:-20~+60°CFeaturesLCD displayPWM battery chargingAll necessary protections equippedAdjustable cotrolling parameter of the systemBuild-in industrial micro controllerBuild-in short-circuit protection, open-circuit protection, reverse protection,Over-load protection.Dual mosfet reverse current protection,low heat production.Application:Solar ControllerPackage include1 x solar controller
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger Modes
$12.31Relay ModuleAdd to cartDescriptionTime can be adjusted by a potentiometer to meet the use of most of your occasions.With Micro USB 5.0V power supply input, it is very convenient to use.5-30V ultra wide power supply voltage.Two trigger modes:external trigger and onboard buttons trigger.It has a relay suction indicator.Strong anti-interference ability, all kinds of interference under the relay will …
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger ModesRead More
Reviews
There are no reviews yet.