16W RGB Flash LED Fiber Optic Star Ceiling Lights Source Engine Driver with 24RF Remote Controller
$109.34
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
16W RGB LED Fiber Optic Star Ceiling Lights Engine Driver + 24RF remote Ctroller
Package included
1 Pcs Lights Engine
1 Pcs Remote controller
1 Pcs Chinese and English manual
Specification
Material:Iron
Shell Color:Black
Power:16w
LED chip:RGB LED
Remote:IR 24key remote control
Light Engine Voltage:AC 100~265V
Frequency:50~60Hz
Light color:7 colors(Red, yellow, blue, green, white, pink, light green)
Working temperature:-10-40 degrees
Remote controller battery:1pcs CR2025 button battery
Fiber head inner diameter:20mm(Can install 0.75MM 600 fibers or 1mm 300 fibers)
Size:(L)X(W)X(H) 165X88X40mm /6.5inchX3.46inchX1.57inch(appr.)
Plug:China National Standard Plug(We will be based on your country to send the corresponding adapter plug)
Features
Infrared and ultraviolet rays are filtered to protect the optical fiber
Low noise working, built-in cooling fan, Intelligent protection of the whole machine
Use remote controller to fix the light color or choose the status of automatic color gradient, it can be also mixed lighting.
16WLED high power, instead of the previous metal halide lamp, small size, light weight, power saving, environmental protection.
Optical fiber connection method with the machine
Wll be the first to use fiber-optic transparent shrink film tied into a bouquet,with a aharp knife to cut the formation of the first optical fiber, And then polished to optical fiber polished head will be inserted to deal with a good optical fiber coupling the first head, coupling head screw clockwise, and then you can screw fastening
Start up
Plug the power cord access to the suitable socket,Connected to the power socket, power switch in the inchoinchof position, in the inchIinch position for the boot state, by switching to the inchIinch position, light source device to enter the working state
Weight | 0.407 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.