Solar Fountain 15W Double Pump Power Storage Remote Control Pond Solar Submersible Water Pump Fountain
$222.74
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
15W 17V Solar Power Panel Q1350L/H H150cm Fountain Pump
Built-in polymer Li-ion battery support 4~10 hours working even in windy days!Also can be recharged while spraying water.
Built-in water-level monitoring system, auto-stop when lack of water to protect the pump.
Main Parameters of Solar Panel
Cells:Polycrystalline
Processed:Glass Laminated
Pmax:15W
Vpmax:17V
Ipmax:0.88A
Voc:20.4V
Isc:0.97A
Maximum System Voltage:1000V DC
STC:1000W/m2, AM1.5and25℃
Efficiency:19%
Junction Box IP Grade:IP65
Size:Approx. 360x340x25mm
Weight Approx.:1370g
Cable Length Approx.:5m
Main Parameters Of Pump
Motor Type:Brushless Direct Drive Motor
Model:BP800
Input Voltage:6~24V
Q (Pumping Flow Quantity):0~1350L/H
H (Pumping Head):0~150cm
Pump IP Grade:IP68
LED IP Grade:IP68
Main Material:ABS
Size:Approx. L100mm x D58mm x H63mm
Weight Approx.:340g
Cable Length Approx.:5m
Main Parameters Of LED
Wattage:2W
Quantity:5 Pcs
Cable Length Approx.:0.3cm
Main Parameters Of Base Controller
Battery Type:6Pcs Polymer 18650 Li-ion Battery Pack
Battery Capacity:4400mAh
Battery Rated Voltage:11.1V
Charging High Voltage Protect:12.6V
Discharging Low Voltage Protect:9.2V
Charging Hours:6-8h
Working Hours:4-10h
IP Grade:IP65
Size:Approx. 150mm x 90mm x 47mm
Weight Approx.:450g
Cable Length Approx.:15cm
Operation Guide (by base controller or remote)
Press the ON/OFF to turn ON/OFF the pump, it will be auto-activated in sunlight.
1.Press the MODE to adjust the flow in 100%, 75%, 25%.
2.If the battery is completely drained, when it`s recharged about 50%, the system will auto-start again.
3.The wireless remote control distance is about 10-15 meters and the frequency is 433.92mhz.
Other User Guide
1.Apply in the pools with abundant sunshine.
2.The pump works in solar-powered direct drive mode, the height of water spraying is related to the strength of sunlight.
3. Please use the filter bag to cover the pump to prevent blocking.
4.If the pumps stop working when using, please check if the water pump is short of water, or check if the water inlet of the pump is blocked by sundries , and clean them in time.
5.Please regularly clean the panel surface to keep a normal efficiency.
7.If the cable is not long enough, please ask us for a link to buy an extension cable.
8. The remote is powered by 3V CR2025 battery.
Note
1. Don`t make the pump work without water for a long time, or its lifespan will be shortened or even be damaged.
2. Don`t shade the solar panel when using.
3. The pump is driven by the sunlight, so it works continuously only when the sunlight is enough.
Certificate:CE, FC, RoHS
Package
Package Weight:Approx.3130g
Package Size:Approx. 40cm x 38cm x 10cm
Package Include
1x Panel w 5m Cable
1x Pump(w LED Light) w 5m Cable
1x Remote
9x Fountain Nozzle Accessories
4x Panel Stand
4x Expension Screws
8x Hex Screw
8x Nuts
1x Filter Net
3x User English Manual
Weight | 3.2 kg |
---|
Customers Also Viewed
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire Connectors
$70.86ConnectorsAdd to cartSpecificationModel:SC6-6~SC35-10Material:Tin Plated CopperColor:SilverSize:6mm²/10mm²/16mm²/25mm²/35mm²Mount Hole:6 mm/8 mm/10 mmBox Size(L*W*H):280 x 126 x 14 mmQuantity:100 PcsFeaturesElectro-plated tin exterior.Premium quality copper material, environmentally friendly, safe for using.These tube lugs have a bell shaped end allowing for easy insertion of the cable.Acceptable working temperature is -55℃ to 100℃ and are suitable for applications in the Australian Climate.Copper lugs are …
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire ConnectorsRead More
TDA7377 Subwoofer Amplifier Audio Board 38Wx3 Mini Home Amp 2.1 Channel HiFi Stereo Power Amplifier DIY
$21.86Amplifier BoardAdd to cartDescriptionThe power amplifier board uses 7377 amplifier chip, dual circuit design, optional DC12V / AC12V power supply, and uses 2.1 three-channel output. Available for Bluetooth / Wireless Microphone / Fan. Separate design, easy installation, provides volume and subwoofer adjustment. ParametersWorking voltage:DC12V / AC12V Chip:TDA7377 Op amp:LT084 / 324 Working voltage:DC12V / AC12V Output power:38Wx3 Channel …
XH-W1411 220V 10A Smart Electronics LED Digital thermometer Temperature Controller Switch Module
$17.48Test & Measuring ModuleAdd to cartSpecificationsTemperature range:-55- + 120→Temperature measurement accuracy:± 0.3→Resolution:0.1→Temperature range:-19 ~ 99→Control accuracy:1→Temperature probe:NTC10K / B3950 comes standard with 1 meter waterproof probeSupply voltage:220VTemperature:-25 ~ 55→ Humidity 20% -85% (non-condensing)Output Type:10A relay outputsSize:90*60mm/3.54 Inch*2.36 InchHole size:70*50mm/2.76 Inch*1.96 InchFeatures– The board and plastic panels fixed column compartment and lock nut– Connect the power supply according to the drawings …
3Pcs HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
$24.99DIY Electronic KitsAdd to cartDescriptionIt is DIY Kit, must be assemble to work. User need technical operation ability.Package included3 x HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpa
$60.74Carbon FiberAdd to cartSpecificationSize;100 x 100cmWidth; 0.25mmMaterial:Carbon fiberCompressive strength:3900 mpaFeaturesa.Uniform texture, without color. Weaving skills, good gloss.b.Mainly used in aircraft main, tail and body; automotive engine synchronizer, hood, bumpers, decorative pieces; bike frame, wheels, leading; racket, cone; kayaking, snowboarding; various models, helmets , watches, pens, bags.Main purpose1. Aerospace:fuselage, rudder, rocket engine shells, missiles casual flow, such as solar …
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpaRead More
3pcs EQKIT 60 Seconds Electronic Timer Kit DIY Parts Soldering Practice Board
$28.54DIY Electronic KitsAdd to cartInstruction:http://img.staticbg.com/file/products/20180726215941ETI-60-timer-kit.pdfFeatureOperating voltage:DC5VStandby current:≤8mAWorking current:≤10mACountdown:60 secondsCountdown ends prompt:three alarmsSoludering difficulty:GeneralBoard size:84 x 84mmNote:Electronic production kit, require buyer soldering assembly.Package included3 x Electronic Timer K
Reviews
There are no reviews yet.