12V24V Car Battery Charger intelligent Pulse Repair Charger Voltage Automatic Identification 6AH-200AH
$89.09
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
12V24V Car Battery Charger Intelligent Pulse Repair Charger Voltage Automatic Identification 6AH-200AH
Features
1. Multiple protection
Short circuit protection, Reverse connection protection, Intelligent Recognition, 0 volt start, Saturation indication
2. 12V/24V voltage automatic identification
12V/24V universal. Suitable for battery capacity 6AH-200AH cars, motorcycles, large trucks, dry batteries, water batteries, maintenance-free batteries and lead-acid batteries.
3. Full of self-stop
One-button automatic, the current is 0 when fully charged, no manual care is required.
4. LED indicator
LED work indication, power indication, Reverse connection alarm, voltage indication, float indication
5. Easy to operation
First connect the battery, red clip positive + black clip negative, you can choose a suitable current, plug in the household 220V power supply, you can start charging.
Operation Instructions
1. Smart charging mode
When using the smart mode, directly connect the power supply and the battery positive and negative poles, the current will automatically adjust according to the battery needs, charge to a certain voltage and automatically stop charging, easy to use,
2. Repair charging mode
For the old battery, the smart mode may charge less and the display is full. At this time, use the repair mode to force the charge, charge the battery to heat and then unplug the power, the battery can store more power, pay attention to the repair mode charging will not Automatic stop,
3. Recommended use
In the winter environment below 0 °C, first use the smart mode to fully charge, and then use the repair mode to charge for half an hour ~ 1 hour, you can make the battery performance better.
Specification
Name:Intelligent Pulse Repair Charger
Charging current:6A/15A
Charging range:6AH-200AH
Input voltage:110V/220V
Output voltage:12V/24V±2V
Input line length:80cm
Output line length:50cm
Material:Aluminum alloy
Size:24×19.5×8.5cm/9.4×7.7×3.3inch
Color:Silver
Package Content
1 x 12V/24V Intelligent Pulse Repair Charger
Note
1.Please allow minor deviation due to manual measurement.
2.The colors may be a little difference for the different monitor.
Weight | 1.306 kg |
---|
Customers Also Viewed
5pcs Blue Light Mini 0.36 inch DC Current Meter DC0-999mA 4-30V Digital Display with Reverse Connection Protection Ammeter
$43.50Test & Measuring ModuleAdd to cartFeatureModule name:Current display module:Measurement accuracy:0.10%Refresh rate:About 200ms – times:Display method:Three digits 0. 36inch digital tubeMeasuring range:0A-999mA:Power supply range:4V-30VWorking current:Less than 8mA:Display color:BlueStorage temperature:-10°C to +65°C:Input resistance:50 milliohmsWeight:10g:Peripheral size:35*14*10mmWiring diagram– The ground wire of power supply end and measuring end of this ammeter adopts common ground design, that is, the ground wire of the power supply …
ISD1820 3-5V Recording Voice Module Recording And Playback Module Control Loop Play / Jog Play / Single Play
$8.73Sensor & Detector ModuleAdd to cartDescriptions Main chip:ISD1820 Size:38.5 x 42.8mm Operating voltage:DC 3~5V Features Easy to use 10 second voice recording and playback. High quality, natural voice restore. Can be used as a megaphone module. With loop play, jog play, single play function. control. This module can directly drive 8 ohm 0.5W small speakers. Power supply:3-5V, can be connected …
15pairs MC Connector Male Female 30A 1000V with 1pair MC Spanner Solar Panel Branch Series Connect Solar System
$42.07Electronic Accessories & SuppliesAdd to cartDescriptionRated voltage:1000 V Rated impulse voltage:1000 V Rated current:24A – 14 AWG (2.5mm2;), 30A – 12 & 10 AWG (4mm2; & 6mm2😉 Test voltage:6 kV (50 Hz) Protection grade:IP67 Insulation material:PC/PA Contact material:Copper, silver-plated Operating temperature:-40°C ~ +90°C Safety class:II Flame class:UL94-V0 Contact resistance:≤5mΩ Insertion / Withdrawal force:≤50N / ≥50N Suitable for cables:10, 12, 14 …
10Pcs TJA1050 CAN Controller interface Module BUS Driver interface Module
$22.99Driver ModuleAdd to cartDescription1. onboard TJA1050 CAN controller interface chip2. chip commonly used pin has led, convenient connection to use3. pin 5 v to power supply4. PCB board size:22 (mm) x11.5 (mm)Package included10 x TJA1050 CAN Controller Interface Module
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/s
$10.92Card ReaderAdd to cartDescriptionRC522 chipMF RC522 is applied to the highly integrated read and write 13.56MHz contactless communication card chip, NXP launched by the company for the ‘table’ application of a low-voltage, low-cost, small size of the non-contact card chip to read and write, smart meters and portable handheld devices developed better choice. The MF RC522 use of …
3.3V RC522 Chip IC Card induction Module RFID Reader 13.56MHz 10Mbit/sRead More
Reviews
There are no reviews yet.