12V 99800mAh Car Jump Starter 4USB 4 Light Modes Emergency Auto Quick Charge Power Bank
$103.26
Plug US Plug / Plug AU Plug / Plug UK Plug / Plug EU Plug /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
12V 99800mAh Car Jump Starter 4USB 4 Light Modes Emergency Auto Quick Charge Power Bank
Specifications
Name:12V 99800mAh Car Jump Starter
Color:Yellow+Black
Size:190*84*34mm/7.5*3*1in
Capacity:99800mah
Battery type:Polymer lithium battery
Charging input:15V 1A
Output:12V
Starting current:300A
Peak current:600A(3s)
Charging Time:2-3h
Applicable Temperature Range:-20℃~60℃
4 light mode:flashlight mode, flash mode, SOS mode, red and blue warning mode
Function:flashlight mode, flash mode, SOS mode, red and blue warning mode
Features
– Powerful Car Jump Starter:Easily and instantly jump-start your 12V cars, trucks, SUV, ORV, MPV. It can start the car with gasoline displacement up to 6.0L and diesel displacement up to 3.0L.
– Quick Charge Power Bank:99800mAh capacity and 4-in-1 smart USB port, it can quickly and fully charge for your smartphones, tablets, GPS, laptops.
– 4 medium mode:flashlight mode, flash mode, SOS mode, red and blue warning mode.
– Easy to Carry:Packed in a small EVA box, compact and portable.
– Waterproof and dustproof. Low-temperature resistance, high-temperature resistance.
Five Practical Functions
1. Instantly start the car, safety, and emergency necessities.
2. Efficient intelligent charging, with adapter and charging line, can be applied to more than 95% notebook, mobile phones, tablet PCs, cameras and other electronic equipment.
3 Temperature protection, short circuit protection, constant voltage protection, constant current protection, overcharge protection, over-discharge protection, Anti-reverse protection, magnetic field protection.
4.Light mode:Turn on the on/off button and press and hold the 3-second start button to turn on the flashlight mode. Then press the start button to switch the flash mode. Press the start button again to switch the SOS mode.
5. Turn on the on/off button and double-click the start button to turn on the red and blue warning mode.
Cautions
-To avoid accidents, make sure to note the following cautions.
-Take off the main unit within 30 seconds after starting the car.
-Don’t clip the two terminals at the same end on the battery.
-Don’t Disassemble the unit.
Package Included
1 x Car Jump Starter
1 x Power Adapter
1 x One For Three Mobile Phone Line
1 x Cable
1 x Car Charger
1 x Charger
1 x Battery Clamps(Black+Red)
1 x User Manual
1 x EVA Bag
(Distribute the adapter according to your country.)
More Details
Weight | 1.2 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.