10A 12V/24V PWM Solar Panel Charge Controller Li-ion & Lead Acid Battery Charger USB LCD Display
$38.46
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
10A 12V/24V LCD Display PWM Solar Panel Charge Controller Li-ion & Lead Acid Battery Compatible w USB DC Backlight LCD Display
KEY Point 1:Support Both Lithium Battery & Lead Acid Battery
The default charging mode is lithium battery, you can shift it to the Lead acid battery.
KEY Point 2:Data Recording
New-developed CPU board is equipped with data recording and storage functions.The voltage and time of each charge will be recorded automatically, which will get ready for a automatic identification of the next connection.
KEY Point 3:Extra DC 12V/24V Output
Convenient for electric device with 12V or 24V input, like fans, lights, etc..
Specifications
Model:KYZ-20A
Charge-Control Mode:PWM
Rated Voltage:12/24V Auto-Adaptive
Charge Current:20A
Discharge Current:10.7A
Max Solar Input
Max Solar Power:130W(12V), 260W(24V)
Standby Current
USB Ouput:5V/2A Max
DC Output:12V
Operating Temperature:-35℃~60℃
Size:133x70x35mm
Weight:140G
Parameter For Using Lithium Battery (Double in 24V System)
Equalization (LIt):12.8V
Float:12.0V (defaults, Adjustable range11.5-12.8V)
Undervoltage Protection:10.7V (defaults, Adjustable range9.0-11.0V)
Disstarge Reconnect:11.6V (defaults, Adjustable range11.0-11.7V)
Parameter For Using Lead acid battery
Equalization (bAt):14.4V
Float:13.7V (defaults, Adjustable range13-15V)
Undervoltage Protection:10.7V (defaults, Adjustable range9.0-11.5V)
Disstarge Reconnect:12.6V (defaults ,Adjustable range11.5-13V)
Feature
1. Build-in industrial micro controller.
2. Big LCD display,all adjustable parameter.
3. Fully 3-stage PWM charge management.
4. Build-in short-circuit protection,open-circuit protection,reverse protection,over-load protection.
5. Dual mosfet reverse current protection,low heat production.
6. Improved terminal position design, prevents the backrush of current from burning out the controller, and also protects the battery, making the charging process safer.
7. The screen comes with backlight which will light up when you click any of the buttons, making it easier to operate at night or in low-light locations.
Package Included
1x 30A PWM Solar Charge Controller
1x Screwdriver
1x Manual (in English & Chinese)
Connection Steps (VERY INPORTANT)
1.Connect the battery to the charge regulator-plus and minus.
2.Connect the photovoltaic module to the regulator-plus and minus.
3.Connect the consumer to the charge regulator-plus and minus.
NOTICE
1.Please connect each unit according to the steps above strictly.
2.Make sure the battery have enough voltage for a right battery type identifying.
3.Parameter for using lithium battery will be double when in 24V system.
4.Only for photovoltaic panel use.
Weight | 0.193 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.