10/20/30A 12V-24V Solar Panel Battery Regulator Charge Controller USB LCD Charger
$30.36
Current 10A / Current 20A / Current 30A /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
10/20/30A 12V-24V Solar Panel Battery Regulator Charge Controller USB LCD Charger
Specifications
Style(Option):10A / 20A / 30A
Voltage:12 / 24V
Size:About 2.5cm * 13.3cm * 6.8cm / 1′ * 5.2′ * 2.7′
Features
– Industrial master chip is adopted
– Large screen LCD display, adjustable charge and discharge parameters
– Complete 3-stage PWM charging management
– Built in over-current / short-circuit protection, open circuit protection and reverse connection protection, all of which are self-healing and do not damage the controller
– Dual MOS anti backflow circuit, ultra low calorific value
Package Includes
1 * Solar Panel Controller
Note
– The 10A controller uses the solar panel in 130W
– The 20A controller uses the solar panel in 360W
– The 30A controller uses the solar panel in 390W
– The controller first connects to the battery and then connects to the solar panel
– The installation location of the controller and battery pack should be far away from high temperature and humidity, and also away from flammable and explosive materials. When using, please place the controller in a ventilated place, do not cover the controller or install it on the car
– The controller is 12v24v automatic adaptation. When installing for the first time, make sure that the battery has enough voltage, so that the controller can identify the correct battery type
– Install the controller close to the battery as far as possible, so as to avoid voltage drop caused by too long wire and affect the judgment of normal voltage
– This controller is only applicable to all kinds of lead-acid batteries (including openings, seals, gels, etc.), please do not use it for other batteries (including lithium batteries, nickel hydrogen batteries, etc.)
– The controller can only use photovoltaic panel as charging source, do not use DC or other power supply as charging source
– The controller will generate heat when running. Please install the controller on a flat and well ventilated surface
Q&A
1. How many watts of solar panels can be connected to each of 10A, 20A, and 30A
Within 10A120W, within 20A240W, within 30A360W
2. Q:Does this controller support lithium batteries
Answer:Currently, only lead-acid batteries (including open, sealed, and gel batteries) are supported, but lithium batteries are not supported (please do not connect lithium batteries to the risk of charging and explosion)
3. Q:My solar panel is 36V200W, can I charge a 12V battery
Answer:When charging a 12V battery, the working voltage of the solar panel is between 17-23V, and when charging a 24V battery, the working voltage of the solar panel is between 36-46V. Please confirm the power and working voltage of the solar panel, it can be used within this range, if it is too large, it will damage the controller
4. Q:Can the inverter be connected to the load end of the controller
Answer:Please connect the inverter directly to the battery, not to the load end of the controller
5. Q:Does the controller have requirements for battery capacity
Answer:No, as long as the voltage corresponds to it (but the maximum current of the panel corresponds to the battery capacity), for example:the current of the solar panel is 5A, the battery capacity is preferably 50AH, the current of the solar panel is 10A, the battery capacity is the best It’s 100AH. Don’t use a big board to charge a small battery, it will be dangerous
6. Question:How to connect the solar panel, battery and controller in the order of connection
Answer:Please be sure to connect the battery first (to ensure sufficient battery power) before connecting the solar panel. When disassembling, please disassemble the solar panel first, and then disassemble the battery. Please connect in strict order, otherwise the controller and other components may be damaged
Weight | 0.157 kg |
---|
Customers Also Viewed
3 Axis GRBL USB Driver offline Controller Control Module LCD Screen w/ Controller Board SD Card for CNC 1610 2418 3018 Wood Router Laser Engraving Machine
$93.14Control BoardAdd to cartDescriptionThis offline controller w/ controller board is designed for the use of Mini CNC router 1610/2418/3018 and even with more advanced function of tool set, limit switch supportive, Laser supportive; Offline and Bluetooth supportive.SpecificationUSB Cable Length:20cmFirmware:GRBL 08, 09, 1.1 and so on Input Voltage:DC 7V- 36VApplicable CNC Router:3 Axis CNC router 1610; 2418; 3018Features1. Support …
20Pcs PS2 Game Joystick Switch Sensor Module
$34.87Other Module BoardAdd to cart20Pcs PS2 Game Joystick Module For Description This is PS2 game joystick module for Lots of robot projects need joystick. This module provides a affordable solution to that. Simply connect to two analog inputs, the robot is at your commands with X,Y control. It also has a switch that is connected to a digital pin. …
Ebyte E07-M1101D-TH 10dBm Spring Antenna 433MHz CC1101 Wireless Transceiver SPI 433mhz RF Module
$9.18Smart ModuleAdd to cartSpecificationsInterface:SPIPower:10dBmDistance:520mSupply voltage:1.9 ~ 3.6V DCFrequency:433MHz(387 ~ 464MHz)RF Parameter:Value:RemarkWorking frequency:387~464 MHz:Default:433MHz (26MHz oscillator)Transmitting power:10 dBm:Max. Power (10mW)Receiving sensitivity:-108 dBm:Air data rate:0.6kbpsAir data rate:0.6k~500kbps:Default:0.6kbpsTest distance:600m:In open and clear air, with maximum power, 5dBi antenna gain, height of 2m, air data rate:0.6kbpsHardware Parameter:Value:RemarkSize15 * 30 mm Without Spring antennaAntenna typeSpring antenna Communication interfaceSPI PackageDIP Electronic parameter:Min.:Typ.:Max.:Unit:ConditionPower supply:1.8:3.3:3.6:VCommunication level:1.8:3.3:3.6:VTransmitting …
Waveshare IS62WV51216BLL SRAM RAM Module Storage Memory Board
$28.42Expansion Board & ShieldAdd to cartFeatureFunction:SRAM IS62WV51216BLL (8M Bit), can be directly connected to the corresponding FSMC interface of the Open series development board, and the external expansion interface supports external expansion of SRAM, LAN, USB HOST, etc.Typical application:SRAM external expansion storageMain resources:IS62WV51216BLL (8M Bit), control interfacePackage includes1 x IS62WV51216BLL SRAM Board
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79
$15.30Other Module BoardAdd to cart>>>Manual:Click here to openSpecificationsModel No.:HBVCAM-3M1917Model Size:30mm ≠ 25mm ≠ 5.0mm÷0.2MMTemperature (Operation):-30C to 70CTemperature (Stable Image):0C to 50CAssembly technique:SMT (ROSH)Focus:FixedObject distance:30CM-infinityResolution:800LW/PH (Center)PCB printing ink:Blackinterface:USB 2.0Power supply:USB bus powersupply voltage:DC 5V÷5%Maximum Power consumption:600WOperating system request:Win XP/win 7,8 / vista /android 4.0/ mac /Linuxwith uvc Sensor:OV3660 (1/5” )Seneor Package:CSP,Bare DieMaximum resolution:2048*1536Sensitivity:670mV /(lux-sec)Pixel Size:1.4┢m x 1.4┢m Maximum Image Transfer …
3 Megapixel Optical Zoom Cam Module Fixed Focus 3MP OV3660 Camera Module FOV 79Read More
Hall Effect Magnetic Sensor Module DC 5V
$4.36Sensor & Detector ModuleAdd to cartDescription This is Hall Effect magnetic sensor module DC 5V for Brand:KEYES Model:KY-003 Magnetic, speed, gap induction Suitable for DIY project Working voltage:DC 5V Material:PCB Feature Small size and high sensitivity. response temperature and good performance. Precision and high reliability 3144 Series Hall principle of Hall effect switch IC, using technology to produce magnetic semiconductor …
Geekcreit Portable Mini Automatic Spot Welding Machine Control Board 12V/5.6V Portable Lithium Battery Spot Welding Circuit Board Accessories
$40.49Driver ModuleAdd to cartInstructions for use of automatic spot welding control board1. Power requirements:In 12V mode, voltage input is 7-15V (12V recommended), in 5.6V capacitor mode, voltage supports 3.7-6V (recommended 5.6V), current requirements:can output actual current 120-360A2. Button function:switch between 1 power level-2 power level-3 power level-4 power level after long press for 3 seconds3. The red light …
Reviews
There are no reviews yet.