60W 18V Dual USB Solar Panel Battery Charger Monocrystal Solar Power Panel with 40A Solar Controller for Car Moto Motorboat
$123.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
The main function of this product is to charge the 18V battery of car,moto and motorboat or most of the 18V lead-acid and lithium batteries.The trickle charging will be helpful for extending the battery life though itscurrent is small.
The charging method is not only energy saving,maintain battery life,but also can meet the needs of some small capacity car audios,which it’s very suitable for outdoor work,travel or camping.
Specifications
Solar Panel:60W high efficiency solar panel
Dimension:420*420mm
Tolerance:+/-5%
SLA Battery Voltage:18V
Type of Solar Cell:Monocrystalline
Open Circuit Voltage(Voc):18V
Maximum Ystem Voltage:18V
Temperate Coefficient of Isc:(010+/- 0.01 ) %/C
Temperate Coefficient of Voc:- (0.38 +/-0.01 ) %/C
Temperate Coefficient of Power Voc:-0.47%/C
Temperature Range:-40 ℃to +80 ℃
Conversion Rate:19.6%-20%
Operating Instructions
1.Please position the 18V 60W solar panel toward the sunshine firslty,red light of the
ciga-rette lighter will indicate the current output
2.Put it on the workbench in front of the car dashboard,the sunlight absorbing
ability of this way is not strong.But if you set the two elastics at the back of the
product on the sun visor of the car,the sunlight absorbing ability will be better.And it
is the best to fix the sucker in the windshield or other placed which will absorb the
sunlight easily.
Warm Tips
1.Please make sure the positive and negative terminals of this product are
connected with the charged product’s positive and negative terminals before usage.
2.Please do not try to modify the PCB circuit unless you are a professional
technician.And we are not responsible for such a result.
3.The best working time:9:00-17:00 (mainly for sunlight weather).
which is intended to extend the battery life and emergency charge usage.Please
choose other higher current products if you want a faster charging speed.
Note
1.Please don’t scratch the surface of the solar panel with a sharp object.
2.Please make the solar panel exposed to direct sunlightto ensure the best charging speed while it is charging.
3.Please don’t place the charger in the rainny day,or it will lead to a short circuit.
4.The 18V20W solar panel charger is built with an Anti-flow resistense preventerinsdie,it will not occur the backflow phenomenon.
Accessories
1x Solar Panel
1x Crocodile charging clip
2x Suckers
1x 40A Controller
Weight | 1.152 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.