60W 18V Dual USB Solar Panel Battery Charger Monocrystal Solar Power Panel with 40A Solar Controller for Car Moto Motorboat
$123.51
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
The main function of this product is to charge the 18V battery of car,moto and motorboat or most of the 18V lead-acid and lithium batteries.The trickle charging will be helpful for extending the battery life though itscurrent is small.
The charging method is not only energy saving,maintain battery life,but also can meet the needs of some small capacity car audios,which it’s very suitable for outdoor work,travel or camping.
Specifications
Solar Panel:60W high efficiency solar panel
Dimension:420*420mm
Tolerance:+/-5%
SLA Battery Voltage:18V
Type of Solar Cell:Monocrystalline
Open Circuit Voltage(Voc):18V
Maximum Ystem Voltage:18V
Temperate Coefficient of Isc:(010+/- 0.01 ) %/C
Temperate Coefficient of Voc:- (0.38 +/-0.01 ) %/C
Temperate Coefficient of Power Voc:-0.47%/C
Temperature Range:-40 ℃to +80 ℃
Conversion Rate:19.6%-20%
Operating Instructions
1.Please position the 18V 60W solar panel toward the sunshine firslty,red light of the
ciga-rette lighter will indicate the current output
2.Put it on the workbench in front of the car dashboard,the sunlight absorbing
ability of this way is not strong.But if you set the two elastics at the back of the
product on the sun visor of the car,the sunlight absorbing ability will be better.And it
is the best to fix the sucker in the windshield or other placed which will absorb the
sunlight easily.
Warm Tips
1.Please make sure the positive and negative terminals of this product are
connected with the charged product’s positive and negative terminals before usage.
2.Please do not try to modify the PCB circuit unless you are a professional
technician.And we are not responsible for such a result.
3.The best working time:9:00-17:00 (mainly for sunlight weather).
which is intended to extend the battery life and emergency charge usage.Please
choose other higher current products if you want a faster charging speed.
Note
1.Please don’t scratch the surface of the solar panel with a sharp object.
2.Please make the solar panel exposed to direct sunlightto ensure the best charging speed while it is charging.
3.Please don’t place the charger in the rainny day,or it will lead to a short circuit.
4.The 18V20W solar panel charger is built with an Anti-flow resistense preventerinsdie,it will not occur the backflow phenomenon.
Accessories
1x Solar Panel
1x Crocodile charging clip
2x Suckers
1x 40A Controller
Weight | 1.152 kg |
---|
Customers Also Viewed
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire Connectors
$70.86ConnectorsAdd to cartSpecificationModel:SC6-6~SC35-10Material:Tin Plated CopperColor:SilverSize:6mm²/10mm²/16mm²/25mm²/35mm²Mount Hole:6 mm/8 mm/10 mmBox Size(L*W*H):280 x 126 x 14 mmQuantity:100 PcsFeaturesElectro-plated tin exterior.Premium quality copper material, environmentally friendly, safe for using.These tube lugs have a bell shaped end allowing for easy insertion of the cable.Acceptable working temperature is -55℃ to 100℃ and are suitable for applications in the Australian Climate.Copper lugs are …
100 Pcs Copper Cable Lugs Kit SC6-6 ~SC35-10 Electrical Terminal Block Wire ConnectorsRead More
TDA7377 Subwoofer Amplifier Audio Board 38Wx3 Mini Home Amp 2.1 Channel HiFi Stereo Power Amplifier DIY
$21.86Amplifier BoardAdd to cartDescriptionThe power amplifier board uses 7377 amplifier chip, dual circuit design, optional DC12V / AC12V power supply, and uses 2.1 three-channel output. Available for Bluetooth / Wireless Microphone / Fan. Separate design, easy installation, provides volume and subwoofer adjustment. ParametersWorking voltage:DC12V / AC12V Chip:TDA7377 Op amp:LT084 / 324 Working voltage:DC12V / AC12V Output power:38Wx3 Channel …
XH-W1411 220V 10A Smart Electronics LED Digital thermometer Temperature Controller Switch Module
$17.48Test & Measuring ModuleAdd to cartSpecificationsTemperature range:-55- + 120→Temperature measurement accuracy:± 0.3→Resolution:0.1→Temperature range:-19 ~ 99→Control accuracy:1→Temperature probe:NTC10K / B3950 comes standard with 1 meter waterproof probeSupply voltage:220VTemperature:-25 ~ 55→ Humidity 20% -85% (non-condensing)Output Type:10A relay outputsSize:90*60mm/3.54 Inch*2.36 InchHole size:70*50mm/2.76 Inch*1.96 InchFeatures– The board and plastic panels fixed column compartment and lock nut– Connect the power supply according to the drawings …
3Pcs HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
$24.99DIY Electronic KitsAdd to cartDescriptionIt is DIY Kit, must be assemble to work. User need technical operation ability.Package included3 x HIFI Amplifier Passive Tone Board Bass Treble Volume Control Preamp Board DIY Kit
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpa
$60.74Carbon FiberAdd to cartSpecificationSize;100 x 100cmWidth; 0.25mmMaterial:Carbon fiberCompressive strength:3900 mpaFeaturesa.Uniform texture, without color. Weaving skills, good gloss.b.Mainly used in aircraft main, tail and body; automotive engine synchronizer, hood, bumpers, decorative pieces; bike frame, wheels, leading; racket, cone; kayaking, snowboarding; various models, helmets , watches, pens, bags.Main purpose1. Aerospace:fuselage, rudder, rocket engine shells, missiles casual flow, such as solar …
100x100cm High Strength Carbon Fiber Cloth for interlayer 3900 mpaRead More
3pcs EQKIT 60 Seconds Electronic Timer Kit DIY Parts Soldering Practice Board
$28.54DIY Electronic KitsAdd to cartInstruction:http://img.staticbg.com/file/products/20180726215941ETI-60-timer-kit.pdfFeatureOperating voltage:DC5VStandby current:≤8mAWorking current:≤10mACountdown:60 secondsCountdown ends prompt:three alarmsSoludering difficulty:GeneralBoard size:84 x 84mmNote:Electronic production kit, require buyer soldering assembly.Package included3 x Electronic Timer K
Reviews
There are no reviews yet.