1/2/3 Gang Smart Home WiFi Touch Light Wall Switch Panel for Alexa Google Home Assistant
$54.66
Size 3 / Size 2 / Size 1 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
*Smart wifi light touch control switch,scientific electricity, green energy saving.
Features
Control your devices from anywhere.
– Voice control supports English and German.
– A mobile phone can be connected to multiple switches at the same time.
– Multiple mobile phone can also be connected to a switch at the same time.
– Turn on a light or coffee maker before you get out of bed,make your life more easier.
– Use Away-Mode to turn devices on and off at different times to give the appearance that someone is home while you are away.
– You won’t have to worry that you accidentally left the iron or heater on again and conserving energy and helping you save on your electricity bill.
-Charge protection.One-touch key to set the device charging time, effectively prevent overcharge.Protect the phone charge, extend battery life, put an end to security risks.
– Before going home you can open the air conditioning in the living room, open the bedroom warm light, ready to take a bath of hot water, to eliminate the fatigue of the day.
– If you want to go to the bathroom or go to other rooms after you turn off the lights, you can use the Tuya/Smart life app to open the lights in advance,there will never be any fear or accident,it is especially important for the elderly, children and people with disability.
Specification
– Rated load current:15A
– Operating voltage:AC 110v-125v (50HZ/60HZ)
– Standby power consumption:0.4w/h
– Maximum life:100,000 times
– Operating environment:- 20 ~ 50 ° C
– Wireless type:Wi-Fi 2.4GHz
– Support type:Alexa/Google home/AliGenie/IFTTT
– Mobile phone compatible system:IOS/Android4.1 or above
– Power supply:Neutral + live wire
– Rated Current:10A(max)
– Rated Voltage:AC100V~240V(50-60Hz)
– Rated Power:1800(max)
– Wireless Standard:IEEE802.11b/g/n
– Working frequency:2.412~2.484MHz
– Safety:WEP/WPA-PSK/WPA2-PSK
– Encryption:WEP/AES/TKIP
– Size:Gang:1/2/3
– Voice Control:Support English and German
Attention
1.Only to be paired on 2.4Ghz router.
2.Do not use high-power appliances which more than the switch’s load. 3.The wifi smart switch do NOT work with old house’s single-firewire switch,must need a zero-fire wire.
Weight | 0.2 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.