Moisturizing Humidifier USB Charging Mist Spray Handy Atomization Mister Face Moisturizing
$34.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Portable USB Nano Mist Spray Handy Atomization Mister Face Facial Moisturizing
Specification
Material:Plastic + Electronic Component
Color:White
Capacity:20ml
Power:1.85W
Power Capacity:500mAh / 3.7V
Charging Duration:2 Hours
Mist Time:11-30s
Atomization Size:0.3um
Size:(L)X(W)X(H)10X3.3X3cm/3.94inchX1.30inchX1.18inch(appr.)
Package included
1 Pcs Handy Mist Sprayer
1 Pcs USB Cable
1 Pcs User Manual
Features
Premium gift for your friends.
Design mini, which fits for your handbag or pocket.
Enjoy facial sauna at office, on flights, outdoor, at dressing room and so on.
The micro-sized particle is so small that will not disturb the existing makeup.
lt helps to loosen dirt and bacteria, making standard cleansers more effective.
It can also help you set and refresh your make-up like cure eyelash extensions.
The use of Nano mister facial steamer is to open the pores and stimulate skin cells, which helps to improve circulation.
Handy and fashionable cool mist facial sprayer, easy to carry, convenient for you to moisturize skin anywhere anytime, making facial skin elastic and tender.
Moisturize and Refresh your Skin:Nano Ultrasonic technology splits water molecules or the mixture of skincare lotion and water into tiny nanometer particles to make the effective component penetrate into the depth of skin by atomization processing. Deeply cleanse skin to prevent clogged pores, safe for all skin types.
Calming and Refreshing Skin:Using facial mask and facial massage will stimulate the skin after sunburn. Pores open or skin feels painful and itchy. Turn on the product for a few minutes, skin will recovery fastly. The handy steamer can also remove dirt, oil and the other impurities or the leftovers of makeup. Refreshing skin and relieving fatigue are also effective.
Easy to use:Push down the switch, then the tiniest nanometer particles penetrate into the basal cell layer of the skin. One minute session is sufficient to rejuvenate and hydrate the skin. Also it can provide the necessary humidity to help you set and refresh your make-up. Won’t destroy you makeup, easy to use and no side-effect.
Skin Cells:Aromatherapy; As Nano steam relaxes and softens your skin; deeply moisturizing to relieve fatigue; 30s spa facial treatment; eyelash extensions; Direct Skin Indulgence Treatment and so on.
High Capacity Water Tank:20ML water tank can be used for more than 8 times with large amount of mist. Sliding down the slip cover gently and jetted stream of micro-sized particles will be released immediately for skin care. It will stop in 60 seconds automatically, enabling skin to get a sustainable moisture replenishment.
Tips
Do not pierce the spary port.
Use the spray at the distance of 5cm to face before make-up and at the distance of 12cm to face after make-up.
You had better use mineral water, such as bottied water and running water, etc, if use lotion, you must add 99% of mineral water first, then plus 10% lotion.
Weight | 0.036 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.