AC 110V-240V Solar Panel Power Generator LED Light Lamp USB Charger Home Outdoor System Kit
$214.64
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Solar panel
Peak power:3.5W
Max. Power voltage:9V
Min. Power current:0.38A
Open circuit voltage:11.11V
Short circuit current:0.418A
At STC(Standard Test Conditions):AM1.5 1000W/M²25℃
Size:260*145*15mm
Battery
Input:AC 110-240V 50/60Hz
Output:DC 6V
USB output:5V 0.5A
Using 9V solar panel
Size:165*60*120mm
capacity:10000mAh
Bulb
Size:60mm*85mm
Light source:LED
Power:5W
Voltage:5V
Current:1A
Cable:5M
Use life:>5 years
Number:3
Features
-The product is an energy-saving and environment-friendly solar lighting system.
-Suitable for home lighting, emergency lighting for emergency power, emergency lighting, outdoor camping lighting and mobile lighting for agriculture, forestry, animal husbandry and animal husbandry.
-It is easy to operate, easy to use and safe. By placing solar panels in direct sunlight during the day, you can turn the clean, inexhaustible solar energy into electrical energy and store it in the battery. Whenever and wherever you need light and power, it will provides you.
-Fully charge the battery in 15 hours in fine weather.
-With over-charge protection and over-discharge protection.
-There are power indicator, charging indicator and work indicator.
Note
1.This product has a battery, the chassis isn’t waterproof, please do not place in rainy and damp place.
2.The actual charging effect of solar panel depends on the weather; the finer the weather, the faster the charging.
3.Do not use the unqualified power supply to charge the system.
4.Do not insert other products whose electrical parameters do not match into the system for charging.
Package Included
1x solar module
1xbattery
3x bulb
1x USB adapter cable
1x plug
Weight | 2.916 kg |
---|
Customers Also Viewed
5pcs DC 1.8V To 3.6V DIY 76MHz To 108MHz Wireless Stereo PCB FM Radio Module Learning Kits
$28.23DIY Electronic KitsAdd to cartParameterWorking voltage:DC 1.8V-3.6VFrequency range:FM 76-108MHz16-pin dual flat packagePurpose1. Learning electronics.2. Practical ability.3. Particularly suitable for use epoxy PCB welding students use rather than for general use paper-based board.Feature1. FM radio program has a rich, good sound quality, etc.2. It also has search tuning circuit, the signal detection circuit, a mute circuit and compression frequency offset …
5pcs DC 1.8V To 3.6V DIY 76MHz To 108MHz Wireless Stereo PCB FM Radio Module Learning KitsRead More
AK-DB32B-PRO 32-bit Sound-controlled Music Level Light-PRO Version High Sensitivity MIC Signal Acquisition
$73.35LED BoardAdd to cartSpecificationsModel:AK-DB32B-PROInput:5V/250MA (Over 5V may damage the light board. The current can be greater than 250ma, there is no fixed upper limit)Some power supplies have fast charge and high voltage output function, please do not use this kind of chargerOutput:about 2.5WInput port:MicroUSBDimensions:181*16*18.8mmNet weight:86gMaterial:One-piece molding, AnodizingFeaturesBuilt-in highly sensitive microphone (sound-controlled).Aluminum alloy integrated molding housingCustomize LED lighting mold …
5pcs 2S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5V
$26.35Power Supply ModuleAdd to cartDescriptions2-Cell(2S) VersionInput voltage:DC 4.5V-5.5V(Recommend DC 5V)Charging voltage about:2.7V-3.4VCharging current about:230mA-240mAUSB power protectionShort circuit protection and zero volt battery activationBattery protectionOperating ambient temperature:-40° to +85°Storage temperature:-65° to +125°Size:30x 15 x 4mmNoteThe output voltage cannot be measured with a multimeter without a battery. But can be observed with an oscilloscope.Applicationskids toys carDigital CamerasSolar chargingBluetooth ApplicationsAudio equipmentDigital CameraElectronic …
5pcs 2S NiMH NiCd Rechargeable Battery Charger Charging Module Board input DC 5VRead More
Digispark Kickstarter Micro Usb Development Board for ATTINY85
$4.64Motherboard & Development BoardAdd to cartFeaturesSupport for the IDE 1.0+ (OSX / Win / Linux)Power via USB or External Source – 5V or 7 -35V (automatic selection)On-board 500ma 5V RegulatorBuilt-in USB(and serial debugging)6 I/O Pins (2 are used for USB only if your program actively communicates over USB otherwise you can use all 6 even if you are programming via …
Digispark Kickstarter Micro Usb Development Board for ATTINY85Read More
5pcs TPA3116D2 TPA3116 Dual Channel Stereo Digital Audio Power Amplifier Board 120W+120W Module XH-M543
$56.00Amplifier BoardAdd to cartSpecificationProduct Name:TPA3116D2 digital amplifier boardProduct Type:XH-M543Amplifier chip:TPA3116D2Power supply voltage:DC 12-26V (24V recommended)Output power:120W * 2 maxChannel:two-channelSignal to noise ratio:100dbSize:92 * 68 * 17mmPre-board IC improving input sensitivity, high-definition sound qualityPower supply DC 12V 50W * 2Power supply DC 24V 120W * 2Note:Red is positive, and Black is negative! Package Included5 x TPA3116D2 2*120W Dual-channel Amplifier …
5Pcs 1.6 inch Transflective TFT LCD Display Module 130X130 Sunlight Visible SPI Serial Port 3.3V 5V for Arduino
$49.11Display ScreenAdd to cartFeatures 1.6-inch color screen, support 65K color display, display rich colors Semi-transparent LCD, superior performance, clearly visible under strong light SPI serial bus, only a few IO can light up the display Onboard 3. 3V/5V power conversion chip, compatible with 3. 3V and 5V voltage levels Operating temperature range is industrial grade (-20-70 C) Military-grade …
10pcs 3 String 12A 12V 18650 Lithium Battery Protection Board
$34.87Other Module BoardAdd to cartParameterWorking current:12ACharging current:12ACharging voltage:12VOvercurrent:30AInternal resistance ≤ 25mΩWorking temperature:-30°C / +80°CWeight:board = 10g / pcsSize:56*45*1.2mm (length*width*height)FeaturesOvercharge, over discharge, short circuit protectionPackage included10 X Lithium battery protection board
Reviews
There are no reviews yet.