DC 4.5V 3W Portable Full World Band Radio AM FM SW Receiver Speaker Telescopic Antenna Jack
$58.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Color:Black
Frequency range:FM (frequency modulation) 87.0-108.0MHZ / MW (medium wave) 525-1600KHZ / SW (short wave) 3.90-22.00MHZ
Noise limit sensitivity:FM (frequency modulation) > 6uv / MW (medium wave) > 1mv / m / SW (short wave) > 30uv
Selective single signal:> 20dB
Power supply:DC 4.5V 3 *D batteries (built-in battery) DC 4.5V-6V/250 mA AC 220V
Built-in speaker:D92 mm 4 ohms 3W
External headphones:D3.5 mm 32 ohms
Material:Plastic
Features
-12-band FM / medium wave / short wave high sensitivity radio
-High-quality speaker sound is loud, low noise
-FM (power on) and SW/MW (power on).
-It is powered by three D batteries and saves power.
-External DC/AC power supply is available.
-Pluggable headphones.
-User-friendly design, easy to carry.
-Switch the radio. Press the FM or MW/SW button to turn the radio on, press the -POWER OFF button to turn off the radio.
-Listen to FM radio. When the FM button is pressed, the power is turned on and the FM indicator is on. At this time, the FM radio is played. Rotate the tuning knob to observe the frequency as a window and select the radio program you want to listen to.
-Listen to the medium wave broadcast. When the MW/SW button is pressed, the power is turned on, the amplitude/short wave indicator lights up, the band selection push button is pushed to the MW (medium wave) band position, the tuning knob is rotated, the frequency indication window is observed, and the broadcast program you want to listen to is selected.
-Listen to shortwave broadcasts. When the MW/SW button is pressed, the power is turned on, the amplitude/short wave indicator lights up, the band selection push button is pushed to the SW (short wave 1-10) band position, the tuning knob is rotated, the frequency indication window is observed, and the broadcast program you want to listen to is selected. .
-Adjust the volume:Rotate the volume up and down. Connect the knob to adjust the volume of the radio to fit the size.
Package Included
1 x Portable radio
1 x Charging cable
1 x User manual
Weight | 0.752 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.