DC 4.5V 3W Portable Full World Band Radio AM FM SW Receiver Speaker Telescopic Antenna Jack
$58.71
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Color:Black
Frequency range:FM (frequency modulation) 87.0-108.0MHZ / MW (medium wave) 525-1600KHZ / SW (short wave) 3.90-22.00MHZ
Noise limit sensitivity:FM (frequency modulation) > 6uv / MW (medium wave) > 1mv / m / SW (short wave) > 30uv
Selective single signal:> 20dB
Power supply:DC 4.5V 3 *D batteries (built-in battery) DC 4.5V-6V/250 mA AC 220V
Built-in speaker:D92 mm 4 ohms 3W
External headphones:D3.5 mm 32 ohms
Material:Plastic
Features
-12-band FM / medium wave / short wave high sensitivity radio
-High-quality speaker sound is loud, low noise
-FM (power on) and SW/MW (power on).
-It is powered by three D batteries and saves power.
-External DC/AC power supply is available.
-Pluggable headphones.
-User-friendly design, easy to carry.
-Switch the radio. Press the FM or MW/SW button to turn the radio on, press the -POWER OFF button to turn off the radio.
-Listen to FM radio. When the FM button is pressed, the power is turned on and the FM indicator is on. At this time, the FM radio is played. Rotate the tuning knob to observe the frequency as a window and select the radio program you want to listen to.
-Listen to the medium wave broadcast. When the MW/SW button is pressed, the power is turned on, the amplitude/short wave indicator lights up, the band selection push button is pushed to the MW (medium wave) band position, the tuning knob is rotated, the frequency indication window is observed, and the broadcast program you want to listen to is selected.
-Listen to shortwave broadcasts. When the MW/SW button is pressed, the power is turned on, the amplitude/short wave indicator lights up, the band selection push button is pushed to the SW (short wave 1-10) band position, the tuning knob is rotated, the frequency indication window is observed, and the broadcast program you want to listen to is selected. .
-Adjust the volume:Rotate the volume up and down. Connect the knob to adjust the volume of the radio to fit the size.
Package Included
1 x Portable radio
1 x Charging cable
1 x User manual
Weight | 0.752 kg |
---|
Customers Also Viewed
29Pcs/Set 24/29 Laboratory Glassware Kit 25/50/100/250/500mL Flask Lab Chemistry Glass Ground Joint Distillation Separation
$261.21Lab ChemicalsAdd to cartDescription1. Be made of G3.3 borosilicate glass.This borosilicate glass with low linear coefficient of expansion is ideal choice for fabricating laboratory glassware.Annealing Point:560℃Linear Coefficient of Expansion:32*10-7/℃Softening Point:820℃2. The thickness of the flask wall is 2.5mm.3. All of the joint is 24/29,This kit has 18 kinds of parts as belowNo.:Specification:Part name:Quantity1:24/29:Claisen adapter:12:24/29:75°Distillation adapter:13:24/29:Vacuum take-off adapter:14:24/29:Inlet/Thermometer adapter:15:24/29 …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction Rotation
$10.11Other Module BoardAdd to cartDescription Vibrator Motor is consist of an N20 Motor and a metal eccentric wheel. This N20 motor is has a 5V supply voltage. The output shaft has a rotational speed of 8800 RPM. Specifications can be seen below. With this product, you can implement a vibration function to your application. These days miniature vibrating motors …
Mini DC Vibration Motor Module 8800 RPM High Frequency Vibration Single-direction RotationRead More
D1 R2 V2.1.0 WiFi Uno Module Based ESP8266 Module Geekcreit for Arduino – products that work with official Arduino boards
$13.11Motherboard & Development BoardAdd to cartGithub:Click here to openMore information:Click here to openDescriptionBased on the ESP-8266EX.Compatible, you can use it on IDE.NodeMcu Compatible11 Digital I/O pins1 Analog Input pinOTA — Wireless Upload(Program)On board switching power supply — Max 24V input, 5V 1A outputWhat’s new about V2.1.0Use BRT (Bias Resistor Transistor), easier into flash mode.Optimize the circuit, the system is more …
1.54 inch Electronic Flexible ink Screen Display Module Black and White Dual Color e-Parper OLED
$39.35Display ScreenAdd to cartFeatureWorking voltage:DC 5VWorking current:150mAMaximum power:0.75WDisplay color:black and whiteDisplay size:1.54 inch/2.13 inchDisplay resolution:200*200/250*122Interface type:8pin header with 2.54mm pitchOperating temperature range:-20C to +60CPositioning hole size:diameter 3mmHeight:7mmPackage includes1 x Display board
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3B
$34.43Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.SpecificationsSize:65*56*24mm Weight:27gPins:Raspberry Pi GPIOOutput Voltage:3.3V/5V (IO VCC:3.3V)Analog Port-Input:4 Analog inputs are converted to Digital AD input-Output:Digital input simulated to Analog DA outputDigital Port:27 Digital IOI2C:3 Way I2C(BCM2,3)Serial Port:1 Way Serial Port(BCM14,15)SPI:1 Way …
AD/DA Extension Board PCF8591 GPIO 3.3V 5V for Raspberry Pi 4B/3B+/3BRead More
Wooden Christmas Advent Calendar Christmas Elk Decoration Fits 25 Circular Chocolates Candy Stand Rack
$21.57ChemistryAdd to cartSpecificationName:Wooden Christmas CalendarSize:Approximately 40x35cm (15.7X13.8in)Material:WoodenFeatureIt is sent flat packed, simply slot the stand together and place the tree into the stand and fill with your chocolates.Package Included1 x Christmas Calendar (The Chocolate is NOT included)
3PCS USB Microphone for Raspberry Pi
$27.14Raspberry Pi & Orange PiAdd to cartFeature1. Sensitivity:-47dB ÷ 4dB2. Sensitivity reduce:-3dB at 1.5V3. Working Voltage:4.5V4. Frequency response:100 ~ 16kHz5. SNR:More than -67dB6. Cable length:0.7-0.9MThe effective distance of 2 meters or morePackage included3xUSB Microphone For Raspberry Pi
Reviews
There are no reviews yet.