110V-240V 2 Ports 2.1A 5V Wall Charger Adapter USB Hub Quick Charge Phone Mobile EU Plug
$16.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
☆Product Name:2a charging head Mouse mobile phone charger plug 2-in-1 mobile phone charger set
☆Wide voltage input:AC 110V-220V 50HZ/60HZ
☆color:white
☆Input voltage:110V-240V
☆Output current:5V-2.1A
Mobile phone charger is used correctly
1. All mobile phone chargers are actually composed of a stable power supply (primarily a regulated power supply, a stable operating voltage and a current), plus necessary constant current, voltage limiting, and time-limited control circuits.
2. When charging the phone for the first time, it should be as long as possible – 3 hours is better. Avoid overcharging. Excessively charge the battery to more than 100. Because the lithium battery overcharge is dangerous, if you use the inchovercharged chargerinch and buy the device inchlithium battery with rough quality protection circuit boardinch, then it is no different when waiting for fire! Do not expose the battery Under high temperature or cold, like a three-day sky, you should not put your mobile phone in the car, and expose it to the sun; or take it in an air-conditioned room and put it in a place where it is blown straight.
3. When charging, it is normal for the charger case to have a little heat, but it cannot be inchhigh feverinch. In order to avoid this, it is good to charge at room temperature (about 26 degrees), and do not cover anything on the machine. Stay away from any gold letters. Mobile phone batteries should avoid contact with gold and silver jewelry, watches, metal ornaments, pins, etc., just in case. Because when the socket of the mobile phone battery touches the conductor, a short circuit occurs, which causes the battery temperature to rise. The high temperature causes the chemical substances in the battery to volatilize, which generates a very dangerous gas, and even an explosion may occur in severe cases. Do not recharge the battery when it is not used up. This will not only damage the battery, but also shorten its service life. You should develop a good habit of charging when you run out of electricity.
Feature
1. Built-in IC control protection circuit, over-voltage and over-current protection, maximum protection of charging safety, high charging efficiency and fast speed.
2. Applicable models:For iPad/iPhone/Samsung/HTC/Sony/Millet/LG/Nokia/Motorola/Blackberry, etc. All models on the market , mainstream brands.
3.Durable Design:Robust textured casing and premium internal components ensure perfect performance regardless of scrapes, bumps, or drops.
4. Safety experience, comprehensively improve the efficiency of charging and discharging.
5. Only IC can bring nine protection:temperature protection, short circuit protection, Reset protection, input over voltage protection, input anti-reverse protection, output over-current protection, output over-voltage protection, battery over-charge protection, battery PTC protection .
Package Includes
1x charger
1x USB cable
Weight | 0.083 kg |
---|
Customers Also Viewed
LM338K 3A Voltage Digital Display High Power Adjustable Linear Module Buck Step Down Regulator
$29.73Power Supply ModuleAdd to cartParameterBoard size:9.6cm x 5.8cmDC input:3-35 voltsAC input:1-25 voltsOutput DC:1.2-30 volts; kit weight:155 gramsMaximum current:3 amps, (LM338K theory can go to 5A, we use domestic LM338K, up to 3A, import disassemble up to 5A)Input and output minimum differential:3 voltsMaximum power consumption:50WAbout LM338K maximum power calculationFor example, input 25V, output 18v load current 2A, then the power …
5Pcs Yushun LS-5S 24V 5W AC to DC Switching Power Supply Module Monitoring Power Supply with White Shell
$32.16Power Supply ModuleAdd to cartFeatures1. Wide input voltage range2. With overload, short circuit and over temperature protection functions3. Small size, high efficiency4. Full load aging test5. Ultra-low output rippleSpecificationBrand:EshionModel:LS-5SVoltage:24V200mA LS-5S24Modulation method:pulse width modulation (PWM) typeTransistor connection mode:single-endedInput voltage:86-264VInput voltage range:100~264V ACOutput /Rated power:5WOutput voltage:24VWork efficiency:75%~76%Output ripple noiseVoltage adjustment rate:÷1%Load regulation rate:÷1%Product Certification:CEOutput current:0.2AFrequency range:47~63HZWorking temperature:-20→~+50→Dimensions:58mm*30mm*22mmWeight:25g(1pcs)Package included5 x Power Supply …
SIM7020C NB-IoT Expansion Board Full Netcom Module Support for Arduino LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS
$52.47Expansion Board & ShieldAdd to cartFeatureOnboard Raspberry Pi interface, can be directly inserted into any version of Raspberry PiSupport LWM2M/COAP/MQTT/TCP/UDP/HTTP/HTTPS and other protocol communicationsSupport domestic OneNET/telecom cloud/aira cloud platformOnboard USB interface, can be used for power supply or software debuggingLead out UART control interface, can be used to connect Arduino/STM32 and other main control boardsOnboard level conversion circuit, the default …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY Kit
$21.59Display ScreenAdd to cartDescriptionIt can be inserted directly into Breadboard,Ideal for linking up to your Arduiuo UNO Mini Nano Mega2560 DUE Breadboard etc,or others MCU ( AVR STM32 ARM7 ARM9 ARM10 ARM11 PIC C8051 STC MSP430 FPGA/CPLD etc.) SpecificationsColor:BlueWorking Voltage:DC 3-24VPolarity:Common anodeInterface:2.54MM with PIN/2.54MM no PINSize:22.86 x 14.13 x 2.11 mmWeight:1.3gApplicationMCU/ARM/FPGA/Atmega328pPLC MotorElectronic diy kitESP8266/nodemcuNANO/UNO/MEGA2560/BreadboardRaspberry pi 4/robotPackage Incldued10 x …
10pcs 3.3V 5V 8 Bit Blue Common Anode LED indicator Display Module DIY KitRead More
infrared Light Board 42*IR LED Board for CCTV Camera Night Vision 850nm DC12V
$6.55LED BoardAdd to cartDescription– Infrared IR LED boards for CCTV cameras night vision.– Power supply exceeds DC13V may greatly reduce the LEDs operating life.SpecificationsBoard Diameter:60 mminner Diameter:32mmPower Supply:DC12V / 220mA Operation Temperature:-10→ to +50→LED Lamps / Bulbs Size:5mmIR Lights WaveLength:850nmPackage Included1 x 42*IR LED Board for CCTV Camera
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power Amplifier
$15.27Amplifier BoardAdd to cartFeatures∵ Operating current:>1A∵ Power Output:3~5W∵ Drive Speaker:4~8∵ SNR:85dB@ VDD=5V,Vorms=1V∵ Class D Audio Amplifier∵ Low Distortion, Low Noise FloorNotes1.2.5V to 5.5V operation from a single supply ,and damaged upper 5.5V.2.A 5V/1A DC adapter is recommended to supply the module.3.The circuit will be damaged if the power polarity is oppsite.4.4 3W Speaker is recommended5.With mute fuction, Mute …
10pcs XY-SP5W 5128 Mini Class D Digital Amplifier Board 5W Mono Audio Power AmplifierRead More
10Pcs 2 Key Press Film Switch Module Single Chip Microcomputer Extended Keyboard Electronic Switch Module
$16.11Other Module BoardAdd to cartSpecificationsProduct thickness:1.00mm (+0.02mm)Panel material:PCBack adhesive tape:white glueButton strength:280gTemperature:-15 ° C / +65 ° CCircuit material:0.125mm PET transparentButton package type:button planeButton package height:0.3mmKey life:>100,000 timesLoop resistanceConnector:2.54mm square hole with protective coverSize:40*20mmPackage Included10 x 2 Key Press Film Switch
Reviews
There are no reviews yet.