110V-240V 2 Ports 2.1A 5V Wall Charger Adapter USB Hub Quick Charge Phone Mobile EU Plug
$16.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
☆Product Name:2a charging head Mouse mobile phone charger plug 2-in-1 mobile phone charger set
☆Wide voltage input:AC 110V-220V 50HZ/60HZ
☆color:white
☆Input voltage:110V-240V
☆Output current:5V-2.1A
Mobile phone charger is used correctly
1. All mobile phone chargers are actually composed of a stable power supply (primarily a regulated power supply, a stable operating voltage and a current), plus necessary constant current, voltage limiting, and time-limited control circuits.
2. When charging the phone for the first time, it should be as long as possible – 3 hours is better. Avoid overcharging. Excessively charge the battery to more than 100. Because the lithium battery overcharge is dangerous, if you use the inchovercharged chargerinch and buy the device inchlithium battery with rough quality protection circuit boardinch, then it is no different when waiting for fire! Do not expose the battery Under high temperature or cold, like a three-day sky, you should not put your mobile phone in the car, and expose it to the sun; or take it in an air-conditioned room and put it in a place where it is blown straight.
3. When charging, it is normal for the charger case to have a little heat, but it cannot be inchhigh feverinch. In order to avoid this, it is good to charge at room temperature (about 26 degrees), and do not cover anything on the machine. Stay away from any gold letters. Mobile phone batteries should avoid contact with gold and silver jewelry, watches, metal ornaments, pins, etc., just in case. Because when the socket of the mobile phone battery touches the conductor, a short circuit occurs, which causes the battery temperature to rise. The high temperature causes the chemical substances in the battery to volatilize, which generates a very dangerous gas, and even an explosion may occur in severe cases. Do not recharge the battery when it is not used up. This will not only damage the battery, but also shorten its service life. You should develop a good habit of charging when you run out of electricity.
Feature
1. Built-in IC control protection circuit, over-voltage and over-current protection, maximum protection of charging safety, high charging efficiency and fast speed.
2. Applicable models:For iPad/iPhone/Samsung/HTC/Sony/Millet/LG/Nokia/Motorola/Blackberry, etc. All models on the market , mainstream brands.
3.Durable Design:Robust textured casing and premium internal components ensure perfect performance regardless of scrapes, bumps, or drops.
4. Safety experience, comprehensively improve the efficiency of charging and discharging.
5. Only IC can bring nine protection:temperature protection, short circuit protection, Reset protection, input over voltage protection, input anti-reverse protection, output over-current protection, output over-voltage protection, battery over-charge protection, battery PTC protection .
Package Includes
1x charger
1x USB cable
Weight | 0.083 kg |
---|
Customers Also Viewed
10pcs ZF-1 ASK 315MHz Fixed Code Learning Code Transmission Module Wireless Remote Control Receiving Board
$33.80Smart ModuleAdd to cartFeatureProduct model:ZF-7 (with code)Transmission frequency:315MHZWorking voltage:DC 9V ~12VModulation method:ASKQuiescent current:0uAWorking current:30~45mACoding type:fixed code (SC2262)Radiated power:30~45mWTransmission distance:1000 meters (receiver sensitivity -108dBm)Volume:40mm*20mm*10mm:PIN:Description1:ANT:RF signal input pin, this pin should be connected to the antenna2:-:Negative power supply3:+:Positive power supply4:H-L:Digital pinRated parameter:Symbol:ValueDC supply voltage:VDD-VSS:9V-12VStorage temperature range (TS):TSTG:-12°C to 75°CWelding temperature:+260°CPackage includes10 x Receiver Board
2pcs Digital DC 0-100V 0-10A 250W Tester DC7-12V LCD Digital Display Voltage Current Power Meter Voltmeter Ammeter Amp Detector Geekcreit for Arduino – products that work with official for Arduino boards
$34.98Test & Measuring ModuleAdd to cartSpecificationsSimultaneous display of voltage and currentVoltage Measurement Range:DC 0-100VCurrent Measurement Range:0-10APower Measurement Range:0-1000WVoltage Error Range:÷1% (Adjustable)Current Error Range:÷1% (Adjustable)Power Error Range:÷1% (Adjustable)Refresh Rate:300ms/TimesDisplay Method:HTN LCD 3 Rows of 3 DigitsSupply Voltage:DC 7-12VWorking CurrentWorking Temperature:-10 to 60→Package Included2 x DC Digital Voltmeter Ammeter 4 x Cable
5pcs ESP8285 Development Board Nodemcu-M Based on ESP-M3 WiFi Wireless Module Compatible with Nodemcu Lua V3
$49.76Motherboard & Development BoardAdd to cartOverview1. It is fully compatible with Nodemcu V3, but cheaper than it is. NodeMcu is an open source firmware and development tool that helps you prototype your IOT products in several Lua script lines.2. The ESP8285-based development kit integrates GPIO, PWM, IIC, 1-Wire and ADC into a single board.3. The fastest way with the NodeMCU …
Vacuum Cleaner Charger Base for iRobot Roomba 5 6 7 8 9 Serie 595 780 880 860 980 960 Charger Base Dock
$85.04Solar CollectorsAdd to cartSpecificationName:Charger Base DockModel:C04612Material:Plastic Color:Black Size:As picture shownApplication Models:For iRobot Roomba 500/600/700/800/900Features-Let the robot automatically recharge when there is no power.-A good helper for family cleaning.Package Include1 x Charger Base Dock1 x Charger Cable
DC 12V 3.5mA Microphone Pickup Audio Microphone Amplifier Module DIY Kit Dual Track Output Gain Adjustable
$4.93DIY Electronic KitsAdd to cartDescriptionProduct name:Microphone with adjustable sensitivityWorking voltage:DC9-15V, 12V recommendedWorking current:above 100mAResponse frequency:20Hz-20KHzMonitoring range:about 100 square metersFinished product size:length 56 * width 25 * height 16mmProduct net weight:15 gramsThe power input has anti-reverse protection, which can effectively prevent the module from being damaged if the power is reversed.Product descriptionThis product uses a low-noise processing chip, plus a …
3pcs 5V LED Traffic Light Display Module Electronic Building Blocks Board
$4.85Display ScreenAdd to cartFeatureSize:56 x 21 x 11mmFixing hole:3mmPitch:15mmColor:red yellow greenLED:8mm x 3Brightness:Normal brightnessVoltage:5VInput:Digital levelInterface:common cathode, red, yellow and green separate controlPlatform:, microcontrollerPackage includes3 x LED Traffic Light Module
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic Kit
$72.16DIY Electronic KitsAdd to cartNote1. This product does not include housing!! if you need the housing, please purchased separately (Product ID:1247731).2. This is a DIY kit, you need to have some knowledge of electronics and ability.3. Need a lot of soldering, you should have enough patience.4. 8x8x8 blue lights display version.5. APP function only supports Android6. File:Click here to …
Upgraded Version 3D Light Cube Kit 8x8x8 Blue LED MP3 Music Spectrum DIY Electronic KitRead More
Reviews
There are no reviews yet.