Excellway RTL2832U+R820T2 100KHz-1.7GHz UHF VHF HF RTL.SDR All Wave USB Tuner Receiver AM FM Radio
$121.49
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Instruction
WHAT IS SOFTWARE DEFINED RADIO (SDR)
In traditional hardware radios, the mathematical operations required to decode and process radio signals are performed using analogue circuitry. Recently, computers have become powerful enough to perform the required mathematical calculations in software, hence the term software defined radio. This has led to advanced radios that previously required complicated analogue hardware now being able to be implemented easily in software. This has reduced the cost of advanced radio capabilities such as wideband tuning and waterfall displays.
WHAT IS THE RTL-SDR
The RTL-SDR is an extremely cheap software defined radio which is based on DVB-T TV (Digital HD TV) USB receiver dongles that have the RTL2832U chip in them. It was discovered by hardware hacker Eric Fry, Linux driver developer Antti Palosaari and the Osmocom team who were developing their own SDR that the RTL2832U chip had a mode which enabled SDR. Today, by using custom software drivers, a commonly used cheap RTL2832U can then be turned into a sophisticated SDR with features that would have until recently cost in the hundreds to thousands of dollars. Of course, the performance of these dongles will not match a dedicated SDR, but they perform extremely well for the price, and almost all hobbyist projects that can be done with expensive radios or SDRs can also be done with the rtl-sdr. A wideband SDR opens up many interesting possible projects and avenues to explore. Some applications of the RTL-SDR include the following, some of which will be discussed in more depth in the project tutorials chapter.
Uses RTL2832U+R820T2 chip set Manuals Download
Download the Manuals and Software:CLICK HERE TO GET .
Direct sampling RTL-SDR Technical Specifications
Fully assembled and ready to use
Uses RTL2832U+R820T2 chip set
[R820T2 tuner has slightly better sensitivity than the R820T and also works better at frequencies around 1.5 GHz. 100% compatible with software for the older R820T.]
100KHz to 1766MHz, operating frequency
1 PPM temperature compensated oscillator (TCXO)
[Accurate tuning and almost zero temperature drift (2 PPM initial offset, 1 PPM temperature drift)]
Covers all HF amateur bands
Covers VHF & UHF bands from 24-1766MHz
Up to 3.2 M Sample rate. (~2.8 MHz stable)
Receiver modes AM, NFM, FM, DSB, USB, LSB and CW
HF Shortwave Q branch direct sampling
Note:depends upon the SDR software used with the receiver
8-bit ADC giving ~50 dB dynamic range
50 Ohm input impedance
SMA golden antenna connectors It is also more durable and has lower insertion losses
Aluminum enclosure screened panels
Small size board
Freeware software
Independent antenna inputs for Shortwave and VHF
USB computer connection (mini usb) Powered by common USB
All specifications subject to change without notice
Receiving LF/MF/HF (0 – 30 MHz)
The HF band antenna must be connected to the Ant input port.
Signal receiving HF band needs to meet the HF Antennas such as Long Wire, Random Wire, Dipole etc..
To have a good effect it needs matching antenna.
The program of SDR with RTL configured to direct sampling of the signal Q, as shown in the following figure. (Left Figure)
Operation on VHF and UP
The UV band antenna must be connected to the Ant input port
By default the RTL-SDR’s gain is set to zero. Increase this gain by moving the RF Gain slider up, or by turning on Tuner AGC. (Right Figure)
ANTENNA CONNECTION
Direct sampling settings for HDSDR
Click on the ExtIO button. Receiving LF/MF/HF (0-30 MHz) (Left Figure)
Operation on VHF and UP. (Right Figure)
Package Includes
1x 100Khz-1.7GHz Full Band UV HF RTL SDR+Upconverter USB Tuner Receiver
1x Testing Telescopic Antenna
1x USB Cable
Weight | 0.124 kg |
---|
Customers Also Viewed
2000PCS 1 Pin Header Connector Housing for Dupont Wire Jumper Compact
$31.63Electronic Accessories & SuppliesAdd to cartFeatures2.54mm Single-row strip Dupont Wire Jumper.Professional and compact, light weight.Material:PlasticSize:14 x 2.5mm/ 0.55 x 0.1inch (L x W)Color:BlackPackage includes2000 x 1Pin Header Connector
HIFI 2.0 Stereo bluetooth 5.0 Lossless Decoding 27W*2 Digital Class D Car Speaker Audio Power Amplifier Board
$8.73Amplifier BoardAdd to cartDescriptionAVN-302 is a low EMI, no filter, Class D Bluetooth audio decoding power amplifier, with an internal protection mechanism for overcurrent, undervoltage, short circuit and overheating automatic shutdown.SpecificationModel:AVN-302Power:7.4V-14.4VSize:55*50mmOutput power:27W*2Boot instructions1. Insert the U disk, load the file (reading completed) automatically enter the playback, the red indicator flashes2. In the playback state, short press the ‘P/P’ …
CJMCU-1286 PIC16F1823 Microcontroller Development Board
$8.73Motherboard & Development BoardAdd to cartDescriptionCJMCU-1286 is a PIC microcontroller minimum system, running stability and high reliability,internal resources are relatively small, so the microcontroller is simple and convenient to use.The operating voltage is 1.8V – 5.5V.Package included1 x CJMCU-1286 PIC16F1823 Microcontroller Development Board
4Pcs 7-Segment 0.56 inch 4 Digit 12 Pins Red LED Display
$8.38Display ScreenAdd to cart4Pcs 7-Segment 0.56 Inch 4 Digit 12 Pins Red LED DisplayDescriptionWith time displayCommon anodePin Number:12 pinsDigit Number:4 digitsDigit Height:0.56 inch / 1.4 cmSize (L x W ):2 x 0.75 inch / 5 x 1.9 cmColor:RedPackage included4 x 0.56’inch 4 Digit LED Display
3pcs M5Stack StickC Pro to Plus Hat Prototype Diy Protoboard Breadboard PCB Universal Board
$31.71Expansion Board & ShieldAdd to cartProduct FeaturesHole Size:0.039inch 1mm (CNC Drilled)Hole Pitch:0.1 in – (2.54 mm)Entire Hole Quantity:168 HolesPackage Included3 x PRO TO PLUS HAT3 x 8 pin header ( 90° )
Reviews
There are no reviews yet.