90V-240V intelligent Microprocessor Control Gas Detector 5 PPM Alarm Detect Sensor
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Feature
1.human voice prompt
2.High reliable semiconductor method
3.Gas concentration displaying (PPM)
4.power supply from AC 90 V-240 V
5.Intelligent microprocessor control
6.Low battery prompt
7.Auto detect sensor failure
OPERATION INTRUSION
1,FIRST START
Connect the detector to 90 V-240 V power ,the red indicator light is on and there will be a voice prompt as inchWelcome to use our voice carbon monoxide detector , please wait 3 minutes for preheating inch.it will display 3 minutes counting when the detector is in starting-up.
2.BUTTON
Press the TEST/RESET button ,LCD screen light and showinch888inch red light flash,the detector also sound continuous alarm at the seam time .
3.PEAK RECORD
Press the TEST/RESET button,Can view the alarm levels, Delete by the TEST/RESET button.
4.LCD SCREEN
The digits LCD screen to show the concentration from 000-999 PPM
5.LED INDICATOR
In normal working status ,red LED flashed once in every 30 seconds ,Red LED flashes once in every 3 seconds when alarm.
DETECTOR FAULT:WHEN THE DETECTOR IS IN FAULT , IT WILL DISPLAY ING inchERRinch
Technical Parameters
AC voltage:AC 90 v -240 v 50-60 Hz
Operating temperature:0-50 ° C
Working humidity:10 ~ 95% R.H
Sensitivity level:5 PPM
Error:+/- 10%
Alarm concentration reading:2500 PPM (+/-1500 PPM)
Alarm time:keep alarming after over 2500 PPM
Size:100 mm * 100 mm * 30 mm
NOTICE
1.the gas detector is easy to be effected by sharp pounding and shock in transit or installation ,lead to not work .
2.this is a Combustible Gas Detector , can not detect the poisonous gas (such as CO)
3.scheduled maintenance:surface cleaning per month ,specialist inspection per half year.
4.do not use the detergent to clean the gas detector,this will damage the gas detector .
5.do not spray any sprays such as air freshener ,hair spray any sprays such as air freshener,hair spray ,etc.
6.this product is only used to reduce the accident,cannot make sure every time .Except use our detector in right way, please also pay more attention in your daily life and strengthen safety and security conscientiousness.
7.Do not use the detergent to clean the gas detector , this will damage the gas detector.
Package includes
1x Gas Detector
Weight | 0.208 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.