3pcs XH-W1321 0.1 Digital thermostat Mini Embedded Red Digital Display Switch Temperature Controller with Waterproof NTC Sensor Meter
$30.89
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product Name:Miniature embedded digital display thermostat
Product Model:XH-1321
Material:ABS
Case Color:White
LED Color:Red
Input Voltage:DC12V
Temperature Measurement Range:-50-110→
Temperature Control Range:-50-110→
Control Accuracy:0.1→
Display Accuracy:0.1→
Measuring Input:NTC10K Waterproof Probe L=1 Meter
Output Type:Relay Output(Output Switch)
Output Capacity:10A
Size (Length x Width x Height):about 56 x 38 x 32mm (2.17 x 1.50 x 1.26 Inch )
Opening hole size:46 x 34mm
Key Function
SET:Press once during normal use, directly enter the stop temperature setting state, use the up and down keys to set the required stop temperature, long press to enter the internal setting menu.
UP:After long press the setting button to enter the internal setting, increase the value setting by the up button.
DOWN:After long press the setting button to enter the internal setting, use the up button to decrease the value setting.
Code:Description:Setting range (method):Factory settings
P0:Operating mode:H/C:C
P1:Backlash setting:0.1-50:2
P2:Temperature correction:-9.9~+9.9°C:0
P3:Delayed start:0-9:0
Detailed Code Descriptions
P0:Working mode:This value must be set when the thermostat is used for the first time. If it is used for heating heating, set to H, if it is used for cooling cooling, set to C.
P1:Hypothesis setting:Press and hold the setting button for 3 seconds to enter the internal menu, select P1, and press the setting button again to enter the hysteresis value setting state. The hysteresis is the difference required when the thermostat reaches the set temperature and stops working again. For example, it is set to the heating mode. When it is heated to 40 degrees, it stops at 35 degrees and starts to return. The difference is 5
P2:Temperature correction:Press and hold the setting button for 3 seconds to enter the internal menu. Press the up and down keys to select P2, press the setting button again, and set the required calibration temperature by the up and down keys. In the setting, if the detected temperature value is 0.5 °C larger than the actual temperature value, the calibration temperature to be set is -0.5 °C. If the detected temperature value is 1 °C smaller than the actual temperature value, the calibration temperature to be set is 1 °C, and the detection temperature +-calibration temperature = actual temperature.
P3:Delay start:Press and hold the setting button for 3 seconds to enter the internal menu, select P3 by the up and down keys, press the setting button again, and set the required delay time (minutes) by the up and down keys. The delay start is generally used for compressor refrigeration. If it is used in the refrigerator freezer, this value needs to be set. According to the compressor back pressure, the set value is usually 3-6 minutes, if it is not used to control the compressor or no delay. Function, skip this item directly.
Instructions
Set the difference back:Why set the backlash setting When you control the device, the temperature will rise or fall back. How many degrees does the temperature change If you want the temperature to change by 10°, the device needs to set the difference back to 10. By setting the difference back, the device can cycle through the temperature range.
Set the stop temperature:press the set button once in the normal display state to stop the temperature value flashing. You can set the desired stop temperature value by using the up and down keys.
How to set factory settings are restored:Press and hold the up and down keys while the power is on, the digital tube display 888 will then automatically jump to the detection temperature.
Heating mode setting method
Setup steps
The first step is to set P0=H
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
1. Press and hold the setting button to enter the internal menu and set P0 to H.
2. Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
3. Press and hold the setting button to enter the internal menu and set the P1 hysteresis setting.
Use Cases
Control the water heater, heat it to 65 ° C to stop, the temperature drops back to 50 ° C and start heating again, how to set
Step 1:Determine the working mode as heating mode and set P0 to H
Step 2:Press the setting button to stop the temperature flashing. Set the starting temperature to 50 °C with the up and down keys.
The third step:stop at 65 °C, start again at 50 °C, so the return difference needs to be set to 65-50=15, enter the internal menu and set P1 to 15, the heating case is set!
Cooling mode setting mode
Setup steps
The first step is to set P0=C
The second step sets the stop temperature
The third step sets the hysteresis value
Setting method
Press and hold the setting button to enter the internal menu and set P0 to C.
Press the setting button to stop the temperature flashing, and the up and down keys to set the temperature.
Long press the setting button to enter the internal menu, set the P1 backlash setting
Use Cases
Control the farm, ventilate to 26 ° C to stop, the temperature rises to 28 ° C to start the refrigeration again, how to set up
The first step:determine the working mode is cooling mode, set P0 to C
Step 2:Press the SET button to stop the temperature flashing. Set the stop temperature to 28 °C with the up and down keys.
The third step:stop at 26 ° C, start again at 28 ° C, so the return difference needs to be set to 28-26 = 2, enter the internal menu to set P1 to 2, the cooling case is set!
Package includes
3 x Miniature embedded digital display thermostat
Weight | 0.138 kg |
---|
Customers Also Viewed
10pcs ZP01-MP503 Air-Quality Monitoring Module formaldehyde Benzene Carbon Monoxide Hydrogen Alcohol Ammonia Smoke Essence for Air Cleaner Air Quality Monitor
$51.66Sensor & Detector ModuleAdd to cart>>>Manual:Click here to openPrinciple IntroductionZP01-MP503 air-quality module adopts flat surface semiconductor gas sensor. The module has very high sensitivity to volatile organic gases such as formaldehyde, benzene, carbon monoxide, ammonia, hydrogen, alcohol and smoke, essence &etc. The module has been aging, debugged, adjusted and calibrated. So it has good consistency and high sensitivity.ApplicationsAir cleaner, fresh-air …
2400Pcs 100R-910R 5-color Ring Resistance Metal Film Resistance Package 1% Precision
$32.31Module ComponentsAdd to cartFeatures1. Durable and easy to install2. Very convenient and practical3. High precision and stability4. Automatic insertion is applicable5. Very popular among the electronic lovers6. Many type of metal film resistors assorted,can meet your different demand.Specification1. Color:As pictures2. Resistance:100R-910R 3. Structure:Fixed resistor4. Total Length:6cm / 2.36inch5. Resistance Range:1 ┯ ~ 3M┯6. Resistor Tolerance:÷1%Package included2400Pcs Five-color Ring …
2400Pcs 100R-910R 5-color Ring Resistance Metal Film Resistance Package 1% PrecisionRead More
54x41cm Swimming Pool Spa Hot Tub Pond Leaf Rubbish Skimmer Cleaning Net Scoop Fishing Net
$68.03Mesh & Wire ClothAdd to cartDescriptionSwimming Pool Spa Leaf Rubbish Skimmer Cleaning Net Scoop ShovelSpecificationColor:BlueSize:Approx. 51.5cm(L) x 41.5cm(H)Material:High quality PP plastic + NetIt’s easy and convinient to salvage/Easy installation. Just connect to your telescopic pole.Swimming pool telescopic pole is not included.Please keep in a dry place.Note1. (IMPORTANT) No Instructions Included.Professional Installation Is Highly Recommended.2. Please check the size measurement chart …
54x41cm Swimming Pool Spa Hot Tub Pond Leaf Rubbish Skimmer Cleaning Net Scoop Fishing NetRead More
20pcs 2S 7.4V 8A Peak Current 15A 18650 Lithium Battery Protection Board with Over-Charge Protection
$26.12Battery Protection ModuleAdd to cartDescriptionType:Voltage Regulator Operating Temperature:25-45→Dissipation Power:50WSupply Voltage:8.4VApplication:18650 lithium batterySize:41 x 16 x 3.5mmPackage included20 x 2S 8A lithium battery protection board
Reviews
There are no reviews yet.