YYI-4 Current Detection Module DC Over-current Motor Locked Rotor Protection Board Current Sensor Board 30A
$29.47
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:YYI-4
Detection range:voltage:DC 7 ~ 30V, current:0 ~ 30A
Detection accuracy:0.1A (100mA)
Standby current:About 20mA
Relay output:it can control the on-off of DC line within 30A.
With error calibration function, it can turn off the display for a long time and reduce power consumption
Function Description
P-11:when the measured current is greater than I1, the relay is on; when the measured current is less than I1 again, the relay is off.
P-12:when the measured current is greater than I1, the relay is closed; it is always closed until the power supply of the circuit board is cut off.
P-21:when the measured current is greater than I2, the relay is on; when the measured current is less than I1, the relay is off
P-22:when the measured current is greater than I2, the relay is closed; it is always closed until the power supply of the circuit board is cut off.
P-31:when the measured value is less than I1, the relay is on; when the current is greater than I2, the relay is off
P-32:when the measured current is less than I1, the relay is closed; it is always closed until the power supply of the circuit board is cut off.
P-41:when the measured current is between I1 and I2, the relay is closed, and in other cases, the relay is disconnected;
P-42:when the measured current is between I1 and I2, the relay is closed; it is always closed until the power supply of the circuit board is cut off.
P-51:when the measured current is less than I1 or more than I2, the relay is closed, and in other cases, the relay is disconnected;
P-52:when the measured current is less than I1 or more than I2, the relay is closed; it is always closed until the power supply of the circuit board is cut off.
Setting Description
– Power on to display the measured current; (if the measured current end is suspended, the digital display digital runout is normal.)
– It takes more than 1 second to press K1 for the first time to prevent false triggering. The screen displays:P 11:K2 adjustment mode, K3 adjustment function.
– Press K1 for the second time, the screen flashes:0.05 means the value of threshold I1 is 0.05A; K2 sets I1 plus, K3 sets I1 minus
– Press K1 for the third time, the screen flashes:0.10 indicates that the value of threshold I2 is 0.1A; K2 sets I2 plus, K3 sets I2 minus
– Press K1 for the fourth time, the measured current will be displayed on the screen; it means entering the standby mode;
– Long press K2 or K3 in standby mode to fine tune the measured current error.
Package Incldued
1 x YYI-4 Current Detection Module DC Over-current Motor Locked Rotor Protection Board
Weight | 0.094 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.