XH-M453 Dual Digital Display Temperature Humidity Controller thermostat Humidity Smart thermostat incubator Control AC 220V / DC12-24V
$32.79
Voltage 12-24V / Voltage AC220V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:XH-M453
Product specifications:DC12~24V/AC220V
Temperature range:-20~60C
Humidity range:0~100%RH
Control accuracy:÷0.1 C / 0.2%
Detection probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Product weight:about 150g
Appearance size:105*75*38mm
Embedded hole:81*57mm
Package Included
1 x XH-M453 Dual Digital Display Temperature Humidity Controller
1 x Sensor Cable
User Manal
1. Connect the power supply and temperature control humidity equipment correctly according to the wiring diagram. Pay attention to the temperature control and humidity control equipment. Do not connect the wrong ones. When connecting the DC12~24V power supply, distinguish the positive and negative poles. AC220V does not divide the zero fire line.
2. Stop the temperature setting
Press the SET button. When the red screen number starts to flash, press the up and down buttons to adjust the desired stop temperature. After setting, wait for 10 seconds without waiting for the system to automatically save the data.
3. Heating or cooling mode setting
Press and hold the up key, when the red screen displays C-0, press the setting button to enter the C-0 mode setting.
The down button switches between blue screens L and H, where L stands for heating and H stands for cooling. (Note:L when you pick up
The temperature-controlled load must be a heating device. When H, the load you connect must be a cooling device. ) set well
Wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-1 temperature difference setting, and then press
Set the temperature to the temperature difference setting, then press the up and down keys to adjust the temperature difference you want; set
Wait 10 seconds, the system automatically saves the data. (If the stop temperature is set to 35 C, the mode is set to L plus
In the hot mode, the temperature difference is set to 5, and the starting temperature is 35-5=30C, and the temperature control range is between 30~35C.
On the contrary, if the mode is set to H cooling mode, the starting temperature is 35+5=40C, and the temperature control range is
Between 35~40C)
5. Temperature calibration
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-2 temperature correction mode, press the set key to enter the calibration mode, and then press the up and down keys to adjust the difference you want. Value; if the actual temperature is 28 C, the probe detection temperature is 28.2 C, then the correction difference is set to -0.2; if the detection temperature is low, the correction difference can be increased. Wait 10 seconds after setting, the system automatically saves the data.
Temperature parameter code table
Code Name Setting range Default parameters
C-0 mode setting L heating H cooling L heating mode
C-1 temperature difference 0.1~50 C 2.0C
C-2 temperature calibration -10 and 10 C 0.0 C
6. Stop the temperature setting
Press the SET button, the red screen number starts to flash, and then press the SET button to switch to the blue screen number.
Blink, press the up and down keys to adjust the desired stop humidity value; do not wait after setting 10
In seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Press and hold the key, when the red screen displays H-0, press the setting button to enter the H-0 mode setting.
The down button performs switching between blue screens L and H, L for humidification and H for dehumidification. (Note:L when you pick up
The humidity control load must be a humidification device. When H is used, the load you are connected to must be a dehumidification device. ) set well
Wait 10 seconds, the system automatically saves the data.
8. Humidity difference setting
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press
Press the setting button to enter the humidity difference setting, press the up and down keys to adjust the setting you want, and set it.
Wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50% RH, the mode is set to L plus
In wet mode, the humidity difference is set to 5% RH, the starting humidity is 50-5=45%RH, and the humidity control range is between 45~50%RH. On the contrary, if the mode is set to H dehumidification mode, the starting humidity is 50+. 5=55% RH, the humidity control range is between 50~55% RH)
9. Temperature calibration
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode.
Press the setting button to enter the calibration mode, press the up and down keys to adjust the setting difference; if the actual humidity is 56% RH,
The probe detects a humidity of 56.2% RH, and the correction difference is set to -0.2;
Low, just adjust the correction difference. Wait 10 seconds after setting, the system automatically saves the data.
Humidity parameter code table
Code Name Setting range Default parameters
H-0 mode setting L humidification H dehumidification L humidification mode
H-1 Humidity difference 0.1~50%RH 10%RH
H-2 Humidity Calibration -10 and 10%RH 0.0%RH
10. Restore factory settings
Press and hold the up and down keys for 5 seconds at the same time. When the screen displays 888, the factory will be restored.
Weight | 0.154 kg |
---|
Customers Also Viewed
12V 5.2W 165*210mm Mini Polycrystalline Solar Panel Epoxy Board
$26.57Smart Robot & Solar PanelAdd to cartFeaturesExcellent weak light effectIt is important electric parts for transferring the sun light power into electrical power for your applicationBuild your DIY powered models, solar display , solar light and solar toys, etcSpecifications– Material:Polycrystalline– Type:Epoxy solar panel– Maximum power:5.2 (W)– Working current:0-433mA– Working voltage:12V– Open circuit voltage:13.5V– Short circuit current:0.65A– Size:210*165*3(mm)– Reference weight:130gPackage included1 x …
12V 5.2W 165*210mm Mini Polycrystalline Solar Panel Epoxy BoardRead More
10Pcs RobotDyn TP4056 MicroUSB 18650 Li-Ion Battery Charger Module 1A with Power Connector and Cable
$24.26Battery Protection ModuleAdd to cartFeatureThe Micro-USB Li-Ion Battery Charger is a complete constant current/constant-voltage linear charger for single cell lithium-ion/Lithium Polymer (LiIon/LiPo) batteries. The Charger base on TP4056. The ideally suited for portable applications.And the Li-Ion Battery Charger can work within USB and 5V wall adapter. Other features include current monitor,under voltage lockout, automatic recharge, and two status pin …
10pcs 1 Channel 5v Relay Module High And Low Level Trigger
$23.61Relay ModuleAdd to cartDescriptionMaximum load:AC 250V/10A, DC 30V/10A.The chip optocoupler isolation, strong driving ability, stable performance, trigger current 5mA.Working voltage:5V.Every channel of the module can be set high or low level trigger by jumper.Fault tolerant design, even if the control line is disconnect, the relay will not act.Power indicator (green), 1 relay status indicator (red).The interface design is …
10pcs 1 Channel 5v Relay Module High And Low Level TriggerRead More
3pcs 1.25-36V 5A Constant Current Constant Voltage Lithium Battery Charger Step Down Power Module
$23.15Power Supply ModuleAdd to cartSpecificationsInput:IN + input positive, IN- input negativeOutput way:OUT + output positive, OUT- output negativeInput voltage:4-38VOutput voltage:1.25-36V continuously adjustableOutput current:adjustable, maximum 5AOutput Power:75W maximumWorking temperature:-40 to + 85 →Operating frequency:180KHzConversion efficiency:up to 96%Short circuit protection:Yes (limit current 8A)Overtemperature protection:(automatically shut off the output after overtemperature)Input reverse polarity protection:None, (if necessary, please enter the string into the …
Black Acrylic Case + Aluminum Heat Sink for Raspberry Pi Zero W/V1.3
$6.52Raspberry Pi & Orange PiAdd to cartDescriptionThis is the acrylic case specially made for raspberry pi board , both suitable for zero W and 1.3 version.Acrylic material is beatuful and a little fragile , please install it carefully , which is quite easy .And there is a layer of protective film on the surface of acrylic , so it is not …
Black Acrylic Case + Aluminum Heat Sink for Raspberry Pi Zero W/V1.3Read More
2L Non-Toxic Stainless Steel Enema Bucket Tools Kit Douche 2M Tube Reusable Medical Detox Enema Bucket
$78.96Lab Clamp & StandAdd to cartSpecificationName:2L Stainless Steel Enema Bucket KitMaterial:Stainless SteelType:Enema KitCapacity:2LColor:SilverFunction:Cleaning away Bacteria and Reduces the Risk of InfectionsSize:approx.19.5x13cmEnema Tube Length:1.6mFeatures– Large 2L capacity barrel, and you can adjust the water flow through the water control valve.– The enema bucket is reusable, durable, convenient and safe.– Big capacity can clean and vaginal thoroughly.– Cleaning away bacteria and reducing …
50pcs ULN2003 Stepper Motor Driver Board Test Module
$58.32Driver ModuleAdd to cartDescriptionULN2003 is a high voltage and high current Darlington transistor array products with high current gain, high operating voltage, wide temperature range, with strong load capacity and other characteristics, adapted to the requirements of various types of the high-speed high-power drive system.Features1. Using ULN2003 high-power Darlington chip-driven stepper motor2. Increased output expansion interface.3. A, B, …
50pcs ULN2003 Stepper Motor Driver Board Test ModuleRead More
240W 12V/24V 6-200AH Battery Charger for Lead Storage Battery Auto Charger Jump Starter Power Bank
$99.21AC/DC AdaptersAdd to cartFeatures– High power– Suitable for lead storage battery– Double screens– 8 safety protectionSpecifications– Power:240w– Voltage:12v/24v– Charging range:6-200AH– Size:205x140x222mmPackage included1x Battery charger (EU Plug)
Reviews
There are no reviews yet.