XH-M453 Dual Digital Display Temperature Humidity Controller thermostat Humidity Smart thermostat incubator Control AC 220V / DC12-24V
$32.79
Voltage 12-24V / Voltage AC220V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:XH-M453
Product specifications:DC12~24V/AC220V
Temperature range:-20~60C
Humidity range:0~100%RH
Control accuracy:÷0.1 C / 0.2%
Detection probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Product weight:about 150g
Appearance size:105*75*38mm
Embedded hole:81*57mm
Package Included
1 x XH-M453 Dual Digital Display Temperature Humidity Controller
1 x Sensor Cable
User Manal
1. Connect the power supply and temperature control humidity equipment correctly according to the wiring diagram. Pay attention to the temperature control and humidity control equipment. Do not connect the wrong ones. When connecting the DC12~24V power supply, distinguish the positive and negative poles. AC220V does not divide the zero fire line.
2. Stop the temperature setting
Press the SET button. When the red screen number starts to flash, press the up and down buttons to adjust the desired stop temperature. After setting, wait for 10 seconds without waiting for the system to automatically save the data.
3. Heating or cooling mode setting
Press and hold the up key, when the red screen displays C-0, press the setting button to enter the C-0 mode setting.
The down button switches between blue screens L and H, where L stands for heating and H stands for cooling. (Note:L when you pick up
The temperature-controlled load must be a heating device. When H, the load you connect must be a cooling device. ) set well
Wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-1 temperature difference setting, and then press
Set the temperature to the temperature difference setting, then press the up and down keys to adjust the temperature difference you want; set
Wait 10 seconds, the system automatically saves the data. (If the stop temperature is set to 35 C, the mode is set to L plus
In the hot mode, the temperature difference is set to 5, and the starting temperature is 35-5=30C, and the temperature control range is between 30~35C.
On the contrary, if the mode is set to H cooling mode, the starting temperature is 35+5=40C, and the temperature control range is
Between 35~40C)
5. Temperature calibration
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-2 temperature correction mode, press the set key to enter the calibration mode, and then press the up and down keys to adjust the difference you want. Value; if the actual temperature is 28 C, the probe detection temperature is 28.2 C, then the correction difference is set to -0.2; if the detection temperature is low, the correction difference can be increased. Wait 10 seconds after setting, the system automatically saves the data.
Temperature parameter code table
Code Name Setting range Default parameters
C-0 mode setting L heating H cooling L heating mode
C-1 temperature difference 0.1~50 C 2.0C
C-2 temperature calibration -10 and 10 C 0.0 C
6. Stop the temperature setting
Press the SET button, the red screen number starts to flash, and then press the SET button to switch to the blue screen number.
Blink, press the up and down keys to adjust the desired stop humidity value; do not wait after setting 10
In seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Press and hold the key, when the red screen displays H-0, press the setting button to enter the H-0 mode setting.
The down button performs switching between blue screens L and H, L for humidification and H for dehumidification. (Note:L when you pick up
The humidity control load must be a humidification device. When H is used, the load you are connected to must be a dehumidification device. ) set well
Wait 10 seconds, the system automatically saves the data.
8. Humidity difference setting
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press
Press the setting button to enter the humidity difference setting, press the up and down keys to adjust the setting you want, and set it.
Wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50% RH, the mode is set to L plus
In wet mode, the humidity difference is set to 5% RH, the starting humidity is 50-5=45%RH, and the humidity control range is between 45~50%RH. On the contrary, if the mode is set to H dehumidification mode, the starting humidity is 50+. 5=55% RH, the humidity control range is between 50~55% RH)
9. Temperature calibration
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode.
Press the setting button to enter the calibration mode, press the up and down keys to adjust the setting difference; if the actual humidity is 56% RH,
The probe detects a humidity of 56.2% RH, and the correction difference is set to -0.2;
Low, just adjust the correction difference. Wait 10 seconds after setting, the system automatically saves the data.
Humidity parameter code table
Code Name Setting range Default parameters
H-0 mode setting L humidification H dehumidification L humidification mode
H-1 Humidity difference 0.1~50%RH 10%RH
H-2 Humidity Calibration -10 and 10%RH 0.0%RH
10. Restore factory settings
Press and hold the up and down keys for 5 seconds at the same time. When the screen displays 888, the factory will be restored.
Weight | 0.154 kg |
---|
Customers Also Viewed
LILYGO TTGO T2 ESP32 0.95 OLED SD Card WiFi + bluetooth Module Development Board
$48.10Motherboard & Development BoardAdd to cartDescriptionFor more product information, please visit:https://github.com/LilyGO/TTGO-T2-ESP32Pin diagramPackage included1 x ESP32 T2(This product does not include battery)2 x Pin1 x Power Cable
50Pcs White Plastic for Rotary Taper Potentiometer Hole 6mm Knob
$8.17Electronic Accessories & SuppliesAdd to cartFeaturesPractical and convenient to use.Hat knobs are high quality, suitable stalk (round shaft) potentiometers.Suitable for 0.6cm shaft diameter potentiometer.SpecificationsColor:WhiteMaterial:PlasticQuantity:50 pcsSize:13 x 17mm (D x H)Inner hole diameter:6mmPackage included50 x Potentiometer Knob
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power Aquarium
$38.46Electrical Pump & ValveAdd to cartDescriptionFree Electric Battery Syphon Powered Pump – This Cordless water pump will move water for you!Just dip the end into the water and press the on switch, and this remarkable lightweight syphon pump will draw water through the pipe and pump it out of the hose.FeaturesIdeal for thousands of uses around the homeEmptying water buttsDraining …
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power AquariumRead More
150pcs 1W Metal Film Resistor 1% 470 ohm
$11.53Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionPower:1WResistance value:470┯Resistance tolerance:÷1%Package included150 x Resistor
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver
$19.84Relay ModuleAdd to cartSpecification1. Input Voltage:AC85V-AC220V2. RF Frequency:315MHZ3. RF Working mode:Super heterodyne receiver4. Receiver Sensitivity:-107dBm5. Remote Control Distance:>100 meter(In open environment)6. Decoding Way:MCU Software decoding7. Can store the number of remote control:328. Support remote control type:Fixed code, learning code9. Channel:1CH10 .Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)11. Wiring Method:Fixed wiring terminal12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC …
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch ReceiverRead More
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air Conditioner
$34.41Solar CollectorsAdd to cartSpecificationsMode of operation:mechanicalRated power:5WRated voltage:DC5V 1.0AInput voltage:DC 5VInput current:0.5AWind speed:1 meter away from wind speed, greater than 4.0 m / sNoise:less than 36dBWater tank capacity:less than 1 literPower mode:USBBattery:three sections 5Switch type:normal buttonShaking his head:shaking his head up and downTiming function:no timingWind speed gear:1 fileAir supply type:natural windSize:11.5*11*13.5cmSTEPS FOR USAGE1. Unpack and remove the product;2. …
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air ConditionerRead More
Reviews
There are no reviews yet.