XH-M453 Dual Digital Display Temperature Humidity Controller thermostat Humidity Smart thermostat incubator Control AC 220V / DC12-24V
$32.79
Voltage 12-24V / Voltage AC220V /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Product model:XH-M453
Product specifications:DC12~24V/AC220V
Temperature range:-20~60C
Humidity range:0~100%RH
Control accuracy:÷0.1 C / 0.2%
Detection probe:integrated sensor
Output type:relay output
Output capacity:up to 10A
Product weight:about 150g
Appearance size:105*75*38mm
Embedded hole:81*57mm
Package Included
1 x XH-M453 Dual Digital Display Temperature Humidity Controller
1 x Sensor Cable
User Manal
1. Connect the power supply and temperature control humidity equipment correctly according to the wiring diagram. Pay attention to the temperature control and humidity control equipment. Do not connect the wrong ones. When connecting the DC12~24V power supply, distinguish the positive and negative poles. AC220V does not divide the zero fire line.
2. Stop the temperature setting
Press the SET button. When the red screen number starts to flash, press the up and down buttons to adjust the desired stop temperature. After setting, wait for 10 seconds without waiting for the system to automatically save the data.
3. Heating or cooling mode setting
Press and hold the up key, when the red screen displays C-0, press the setting button to enter the C-0 mode setting.
The down button switches between blue screens L and H, where L stands for heating and H stands for cooling. (Note:L when you pick up
The temperature-controlled load must be a heating device. When H, the load you connect must be a cooling device. ) set well
Wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-1 temperature difference setting, and then press
Set the temperature to the temperature difference setting, then press the up and down keys to adjust the temperature difference you want; set
Wait 10 seconds, the system automatically saves the data. (If the stop temperature is set to 35 C, the mode is set to L plus
In the hot mode, the temperature difference is set to 5, and the starting temperature is 35-5=30C, and the temperature control range is between 30~35C.
On the contrary, if the mode is set to H cooling mode, the starting temperature is 35+5=40C, and the temperature control range is
Between 35~40C)
5. Temperature calibration
Press and hold the up key, when the red screen displays C-0, press the up and down keys to switch to the C-2 temperature correction mode, press the set key to enter the calibration mode, and then press the up and down keys to adjust the difference you want. Value; if the actual temperature is 28 C, the probe detection temperature is 28.2 C, then the correction difference is set to -0.2; if the detection temperature is low, the correction difference can be increased. Wait 10 seconds after setting, the system automatically saves the data.
Temperature parameter code table
Code Name Setting range Default parameters
C-0 mode setting L heating H cooling L heating mode
C-1 temperature difference 0.1~50 C 2.0C
C-2 temperature calibration -10 and 10 C 0.0 C
6. Stop the temperature setting
Press the SET button, the red screen number starts to flash, and then press the SET button to switch to the blue screen number.
Blink, press the up and down keys to adjust the desired stop humidity value; do not wait after setting 10
In seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Press and hold the key, when the red screen displays H-0, press the setting button to enter the H-0 mode setting.
The down button performs switching between blue screens L and H, L for humidification and H for dehumidification. (Note:L when you pick up
The humidity control load must be a humidification device. When H is used, the load you are connected to must be a dehumidification device. ) set well
Wait 10 seconds, the system automatically saves the data.
8. Humidity difference setting
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press
Press the setting button to enter the humidity difference setting, press the up and down keys to adjust the setting you want, and set it.
Wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50% RH, the mode is set to L plus
In wet mode, the humidity difference is set to 5% RH, the starting humidity is 50-5=45%RH, and the humidity control range is between 45~50%RH. On the contrary, if the mode is set to H dehumidification mode, the starting humidity is 50+. 5=55% RH, the humidity control range is between 50~55% RH)
9. Temperature calibration
Press and hold the key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode.
Press the setting button to enter the calibration mode, press the up and down keys to adjust the setting difference; if the actual humidity is 56% RH,
The probe detects a humidity of 56.2% RH, and the correction difference is set to -0.2;
Low, just adjust the correction difference. Wait 10 seconds after setting, the system automatically saves the data.
Humidity parameter code table
Code Name Setting range Default parameters
H-0 mode setting L humidification H dehumidification L humidification mode
H-1 Humidity difference 0.1~50%RH 10%RH
H-2 Humidity Calibration -10 and 10%RH 0.0%RH
10. Restore factory settings
Press and hold the up and down keys for 5 seconds at the same time. When the screen displays 888, the factory will be restored.
Weight | 0.154 kg |
---|
Customers Also Viewed
PM3 Proxmark3 V5.0 IC+ID Full Encryption Card Reader All-in-one Access Control Elevator Garage NFC Multiple Card
$207.99Card ReaderAdd to cartFeatureIt is only used for learning RFID NFC communication and testing the technical security of RFID, as a basic learning tool for RFID personnel. Use for illegal purposes is prohibited.Increase the reading memory, you can read more cards, and the reading speed is faster and stronger.Support one-click reading, easy export and import filesSupport dual-frequency cards, …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth Board
$42.69Smart ModuleAdd to cartProduct introductionJDY-64 is a low power consumption lossless two-channel stereo design, and the overall performance is very advantageous. It only needs to connect the module to the application products so that users can quickly achieve wireless music transmission, which defaults no prompt tone for button, switch, connection, fragment opening, and integrated SD card defaults earphone …
10pcs DC3.3-4.2V JDY-64 Lossless Bluetooth 4.2 Module Stereo Audio bluetooth BoardRead More
LILYGO TTGO T-Bot ESP32 Main Chip T-Block with HC-SR04 Module Programmable Hardware MINI Trolley
$91.31Smart ModuleAdd to cartMore Information:https://github.com/Xinyuan-LilyGO/TTGO_TWatch_Library FeatureHardware SpecificationChipsetESPRESSIF-ESP32 (Wi-Fi & Bluetooth)240MHz Xtensa single-/dual-core 32-bit LX6 microprocessorFLASH16MB / PSRAM 8MBSRAM 520 kB SRAMButtonSwitch, ResetUSB to TTLCP2104Modular interfaceI2C On-board clock40MHz crystal oscillator Working voltage2.7V-3.6VWorking temperature range -40→ ~ +85→Size55*46*53 mmWeight48.3gPower SupplyPower Supply InputUSB 5V/1ACharging current500mABattery Input 3.7-4.2VBattery3.7V lithium batteryJST Connector2Pin 1.25mmUSBWi-FiStandardFCC/CE-RED/IC/TELEC/KCC/SRRC/NCC(esp32 chip)Protocol802.11 b/g/n(802.11n,speed up to150Mbps)A-MPDU and A-MSDU polymerization,support 0.4┢S Protection intervalFrequency …
UAF42 Active High Pass Low Pass Bandpass Filtering Frequency Gain Q Adjustable General Filter
$41.54Other Module BoardAdd to cartUAF42 has the following featuresHighly versatile, can be changed as high pass, low pass, band pass and band stop filters as needed (Jumper settings);The design is simple. BB has also designed a software specifically for the UAF42, which makes it easy and flexible to design different types of filters.With high precision frequency and high Q …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music Kit
$15.84DIY Electronic KitsAdd to cartDescriptionThis is a simple mini Christmas tree DIY kit. Three different PCBs are combined into a 3D stereo Christmas tree model. A variety of different colors can be selected. It can be powered by a button battery and can be free from the power supply. Built-in 7 LED gradient modes plus 7 different Christmas melody.Manual:Click …
3pcs Geekcreit Yellow 3D Mini SMD PCB Stereo Christmas Tree DIY Music KitRead More
10pcs 2.54mm 2x4P 8P Double Row Female Straight Pin Header Needle Socket Pin Strip
$6.55Electronic Accessories & SuppliesAdd to cartSpecificationsSpacing:2.54mmGender of Connector:FemaleNumber of Pins:2x4PinType of Row:Double RowType of connector:StraightPackage included10 x 2.54mm 8P double row female straight pin header
Excellway 20Pcs JST Female and Male Battery Connector Set
$10.11ConnectorsAdd to cartDescriptionBrand:ExcellwayName:5 x JST BEC Set Female and Male Battery Connector Bu ggy Truck PlaneMaterial:metal + PlasticFeatures1. Includes 10 RC JST BEC Set Female and Male Battery Connector2. Long service life.3. Easy to install.Package Included5 x male Connectors5 x female Connectors5 x female pins5 x male pins
Reviews
There are no reviews yet.