bluetooth 5.0 Audio DAC ADC 24 Bit Transmit Receive Converter DSP Digital Processing Optical Fiber Output Coaxial Analog Stereo
$27.77
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:type-C or 5V input
Bluetooth restore distortion:0.15%
Total harmonic distortion + SNR:95dB
Audio DAC and ADC:24 bit
Chip module:with 24bit-192k digital audio analysis ability
CPU:240mhz risc-32 CPU processing core
DSP:400MHz CEVA digital signal processing core
Bluetooth version:5.0 compatible with v4.2/v4.2le/v2.1 + EDR
Bluetooth protocol:support Bluetooth 5.0 and A2DP, AVRCP, HFP, spp, Br hid host, Br hid device, ble hid and other Bluetooth protocols. Support SBC and MSBC coding
Certification:support BQB 5.0 certification
Transmit and receive delay:support actx-ll low delay, as low as 30ms
Receiving mode:support fiber output, coaxial output, analog output
Transmission mode:support fiber input, coaxial input, analog input
Features
– Adapt to any audio device to Bluetooth transmission
– Two boards can be connected to each other
– Can receive any Bluetooth signal
– It can transmit audio signal to any Bluetooth receiving device
Bluetooth Sending Mode
Bluetooth transmission – convert audio signal to Bluetooth signal, and provide it to devices that need to use Bluetooth to receive, such as:Bluetooth speaker, Bluetooth headset, Bluetooth card and other receiving terminals.
Bluetooth transmission mode is defined as the main device, which needs to be paired and linked from devices such as Bluetooth speaker and Bluetooth headset. After it is defined as Bluetooth transmission mode, this device is the device that sends audio, so the output interface terminal has no output and can only input signals.
Bluetooth transmission and reception mode has memory saving function. After selection, the power-off mode will not change next time. It is convenient to use pairing and automatic connection directly when receiving or sending
Bluetooth Receiving Mode
the Bluetooth audio signal received by Bluetooth can be paired and connected with the Bluetooth signal sent by mobile phones and other devices. The received Bluetooth signal can be decoded into stereo left and right channel signal, and the stereo signal can be output directly by optical fiber / coaxial.
If you need to receive Bluetooth connection steps:1:press the Bluetooth receive button, set it to Bluetooth receive mode, the blue light is not paired into the flash state, and the pairing succeeds. The Bluetooth name is audio-rx, please connect the Bluetooth name when pairing the mobile phone 2:select the required interface connection cable according to your own audio equipment such as power amplifier, headphone output, optical fiber output and coaxial output
Package Included
1 x bluetooth 5.0 Audio DAC ADC 24 Bit Transmit Receive Converter
Weight | 0.033 kg |
---|
Customers Also Viewed
KW-AR-Mini Kit with 17 Classes UNO R3 DC Motor Breadboard LED Components Set Geekcreit for Arduino – products that work with official Arduino boards
$39.35Module KitsAdd to cartFeatureFree TutorialGood kit for Arduino Starter17 ClassesClass 1 Hello Arduino!Class 2 LED Running LightsClass 3 Key ExperimentClass 4 AD Analog-to-Digital conversationClass 5 PWM ExperimentClass 6 Buzzer ExperimentClass 7 The Temperature Sensor ExperimentClass 8 Photosensitive Light ExperimentClass 9 Fire Alarm ExperimentClass 10 Infrared Remote ControlClass 11 UltrasonicClass 12 8-Bit Digital Display ExperimentClass 13 4 x 8 …
2Pcs Mini Football Soccer Goals for Training Junior Kids Children
$136.93Carbon FiberAdd to cartSpecificationsMaterial:Nylon & G-carbonSize:1200*810*810mmColor:Red&GreenWeight:820gFeatures1. This item is great for junior soccer players to practice their shooting accuracy, or just to have fun and play some shooting games.2. Easy to Set Up–The pop up soccer goals are super easy to set up, your kids maybe can do that all on his own, or call some friends to …
2Pcs Mini Football Soccer Goals for Training Junior Kids ChildrenRead More
5pcs 2S 10A 7.4V 18650 Lithium Battery Protection Board 8.4V Balanced Function Overcharged Protection
$19.20Battery Protection ModuleAdd to cartSpecificationsModel:HX-2S-JH20 Overcharge voltage range:4.25±0.05vSize:46.7*23*3.15mm Over-discharge voltage range:2.9v±0.05vUpper limit working current:10A Working temperature:-40—+50°CUpper limit instantaneous current:20A Storage condition:-40– +80°CQuiescent current:less than 10uA Internal resistance:less than 300mΩ Short circuit protection:protection, charge recoveryCharging voltage:8.4V-9VWelding Point Description· B+ is connected to the battery positive pole;· B- is connected to the negative pole of the battery;· MB is connected to …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIY
$38.46Painting Teaching ToolsAdd to cartFeatures-This set of making tool is especially designed for DIY expoxy resin crafts, including silicone mold,spoon,sequin,drill,nails and so on.-Different silicone molds have different shapes for you to choose,which may accurately match your various needs.-It is easy control with the reliable quanlity as well as the efficence. -The superior DIY tools for your craft works.SpecificationMaterials:Silicone,MetalType:Making ToolsQuantity:55pcs,one …
55Pcs/Set Silicone Casting Molds and Tools Jewelry Pendant Resin Mould DIYRead More
DIY thermoelectric Peltier Semiconductor Refrigeration Cooling System + Fan Kit
$27.54Electronic Accessories & SuppliesAdd to cartFeaturesSimple operation, strong practicabilityFast cooling, outstanding effectPower supply:12V 15AFan power rate:about 5WFan size:40*40mm Cooling profiles:40*40mm for inlet tube:8mm Screws:3mmNoteMust fititng radiator heartsink when power on, or it will burn the kitThis kit does not comes with PeltierPackage included1 x DIY Thermoelectric Peltier Refrigeration Cooling Kit
5pcs I2C 8-bit I/O Expander Module PCA8574AD Expansion Board RobotDyn for Arduino – products that work with official for Arduino boards
$45.20Expansion Board & ShieldAdd to cartFeatureIf you just don’t have enough digital I/O pins on your for Arduino to interface with all your sensors and controls, you might want to look at using the I2C bus to connect a few port expander chip PCA8574AD have 8 digital I/O bits and can be set to addresses 0x38-0x3F respectively.The I2C bus on …
Ebyte E70-DTU-433NW30-GPRS GPRS Modem 6.5km Wireless Networking Equipment 433MHz 30dbm Networking LoRa RF Module lOT Gateway
$260.04Smart ModuleAdd to cartSpecification Model:E70-DTU-433NW30-GPRSProduct name:iot gatewayProduct advantages:Star self-organizing networkTransmission type:GPRSInterface Type:RS232/RS485Frequency band:433MHzTransmission Range:6.5kmSupply voltage:8 ~ 28V DCSize:108*75*37mmInterface:RS232 RS485Application:Industry Network TransmissionPackage included1 x LoRa RF Module
Reviews
There are no reviews yet.