ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
LILYGO TTGO T2 ESP32 0.95 OLED SD Card WiFi + bluetooth Module Development Board
$48.10Motherboard & Development BoardAdd to cartDescriptionFor more product information, please visit:https://github.com/LilyGO/TTGO-T2-ESP32Pin diagramPackage included1 x ESP32 T2(This product does not include battery)2 x Pin1 x Power Cable
50Pcs White Plastic for Rotary Taper Potentiometer Hole 6mm Knob
$8.17Electronic Accessories & SuppliesAdd to cartFeaturesPractical and convenient to use.Hat knobs are high quality, suitable stalk (round shaft) potentiometers.Suitable for 0.6cm shaft diameter potentiometer.SpecificationsColor:WhiteMaterial:PlasticQuantity:50 pcsSize:13 x 17mm (D x H)Inner hole diameter:6mmPackage included50 x Potentiometer Knob
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for Auduino
$6.55Relay ModuleAdd to cartDescription1. 5V solid state relay 240V 2A, output with resistance fuse 240V 2A.2. Size:25*34*25 (length * width * height) Net weight:13g3. Input power:5V DC (160MA)4. Input control signal voltage:(0-1.5V state low level relay ON) (2.5-5V state high level relay OFF)5. The blue KF301 terminal is more convenient to connect to the control line.Module interfaceInput sectionDC+:Connect …
BESTEP 1 Channel 5V Low Level Solid State Relay Module with Fuse 250V2A for AuduinoRead More
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power Aquarium
$38.46Electrical Pump & ValveAdd to cartDescriptionFree Electric Battery Syphon Powered Pump – This Cordless water pump will move water for you!Just dip the end into the water and press the on switch, and this remarkable lightweight syphon pump will draw water through the pipe and pump it out of the hose.FeaturesIdeal for thousands of uses around the homeEmptying water buttsDraining …
Liquid Transfer Siphon Pump Hand Gas Oil Water Fish Tank Battery Power AquariumRead More
150pcs 1W Metal Film Resistor 1% 470 ohm
$11.53Electronic Accessories & SuppliesAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.DescriptionPower:1WResistance value:470┯Resistance tolerance:÷1%Package included150 x Resistor
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch Receiver
$19.84Relay ModuleAdd to cartSpecification1. Input Voltage:AC85V-AC220V2. RF Frequency:315MHZ3. RF Working mode:Super heterodyne receiver4. Receiver Sensitivity:-107dBm5. Remote Control Distance:>100 meter(In open environment)6. Decoding Way:MCU Software decoding7. Can store the number of remote control:328. Support remote control type:Fixed code, learning code9. Channel:1CH10 .Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched)11. Wiring Method:Fixed wiring terminal12. Rated load:10A 250VAC / 10A 125VAC, 10A 30VDC …
3PCS 315MHz 220V 10A 1CH Channel Wireless Relay Remote Control Switch ReceiverRead More
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air Conditioner
$34.41Solar CollectorsAdd to cartSpecificationsMode of operation:mechanicalRated power:5WRated voltage:DC5V 1.0AInput voltage:DC 5VInput current:0.5AWind speed:1 meter away from wind speed, greater than 4.0 m / sNoise:less than 36dBWater tank capacity:less than 1 literPower mode:USBBattery:three sections 5Switch type:normal buttonShaking his head:shaking his head up and downTiming function:no timingWind speed gear:1 fileAir supply type:natural windSize:11.5*11*13.5cmSTEPS FOR USAGE1. Unpack and remove the product;2. …
DC 5V Portable USB Rechargeable Water Cooler Cooling Fan Desk Mini Air ConditionerRead More
Reviews
There are no reviews yet.