ZHIYU DC 12V 2 Way 3 Wire Fan Smart Temperature Controller with Temperature Speed Digital Display
$26.23
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Power supply:DC 12V; the maximum range 11-14V; too low voltage displaying Lu; too high voltage displaying Hu; protection closed output
Output current:single channel maximum continuous output current 1.2A; double channels being both used at the same time current cannot exceed 2.0A; not suggesting using the fan with current being lower than 0.15A
Work efficiency:90% (input 12V; output double way 8V 0.8A)
Reversely connected protection:short circuit reverse connection protection; power supply being connected reversely will burn out input copper foil
Over current protection:no over current protection; please note insulating installation; power up it after the wire is well connected to avoid output short circuit!! (only paid maintenance will be offered for overload and short circuit damage)
Thermal resistance parameters:NTC 10K B=3950
Measurement temperature error:1%-0.5→; after combining 1% probe, the maximum error 2%-1→
Board dimensions:92mm*54mm (width*height); location hole place:87mm*47mm diameter 3.4mm
It automatically take turns to display channel 1 temperature, rotation speed, and channel 2 temperature, rotation speed under normal operation; quickly switch the display by pressing the inch+inch inch-inch button.
Parameter Setting
Manual rotating speed setting (the minimum rotating speed under temperature control)
Press “OK Inch button to enter into rotating speed setting function; FAN1 2 indicator lights lighting up at the same time stands for current adjustment being fan 1’s output size and by pressing the “+ Inch&“- Inch button to adjust it with minimum 1 & maximum 100. After the setting, press “OK Inch button to enter into fan 2’s output size setting; after the setting, press “OK Inch button again to exit and save the parameters.
Temperature control and stop-rotating alarm settings
Under normal operating state, long-press “OK Inch button to enter into temperature control and stop-rotating alarm settings; indicator light on the right indicates corresponding setting channel; corresponding setting parameter display, meanings, and range (“** Inch stands for digit )
L** accelerating speed temperature setting, range 5-94→; lower than H** at least 5→, or adjust up H** by linkage.
H** full speed temperature setting; range 10-99→; higher than L** at least 5→, or adjust down L** by linkage.
F** fan being shut off temperature; minimum 1; maximum limitation is lower than L** 2→; when F00 is set, fan is not shut off.
bON / bOF:channel stop-rotating alarm on / off.
Adjust the setting value by pressing “+ Inch&“- Inch button; press “OK Inch button to switch setting parameters; set the channel 1 according to the above sequence first, channel 2 second; press “OK Inch button at last to exit and save parameters.
Supplementary Instructions:when channel temperature reaches L** after fan being shut off function is started, fan is started at minimum speed; it will accelerate with temperature increasing; when channel temperature is lower than F**, fan is shut off. Corresponding channel stop-rotating alarm will automatically block shut-off status’s rotating speed check.
Shutting off channel 2 display
One channel is needed for some application and now channel 2 can be shut off; the setting method:keep pressing “OK Inch button to make it be powered up with controller not being powered up; controller entering into channel 2 displays setting status; modify the setting by pressing “+ Inch&“- Inch button; 2ON / 2OF stands for channel 2 display / no display; after the setting, press “OK Inch button to save it, exit and enter into operating status.
Note:after channel 2 display being shut off, it will not display channel 2’s rotating speed and temperature only on LED display; it will not affect channel 2’s function.
Package included
1 x Fan temperature controller
2 x Temperature probe
1 x Buzzer
Weight | 0.047 kg |
---|
Customers Also Viewed
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent Case
$69.97DIY Electronic KitsAdd to cartFeatures– Made of acrylic material, clear and lightweight.– Simply design, very easy to install.– It is an wonderful display case, keep your collection figures tidy and clean.SpecificationsMaterial:AcrylicColor:TransparentSize:(L x W x H )21cm x 21cm x 41cm (8.3’x8.3’x16.1′)NOTEYou need to assemble the sheet into a box.Notice1. Please allow 1-3cm error due to manual measurement. Please make …
40x20x20cm Acrylic Display Box Clear Perspex Plastic Dustproof Base Transparent CaseRead More
3Pcs 1*40P Curved Needle Tin Plated Single Curved Needle 2.54MM Pin Connector
$2.15Module ComponentsAdd to cartSpecificationRoted Current:3.0AMPContocl Resistonce:20m┯ MaxWithstand Voltage:1000V AC/DCInsulation Resistance1000m┯ MinOperation Temperature:-40→ ~+105→Contact Material:BrassContact Plating:Tin over NiInsulator Material:Polyester(UL94V-0)Standard:PA6TMax.Processing Temp:230→ for 30-60 seconds(260→ for 10 seconds)Package included3 x 1*40P Single Curved Needle
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyne
$6.80Smart ModuleAdd to cartTransmitter ModuleSpecificationWorking voltage:3V ~ 12VWorking current:20mA ~ 28mAStandby current:0mAWorking frequency:315MHzTransmitter distance:>500m (sensitivity can be above -103dBm if in wide field)Output power:16dBm (40mW)Transmitter rateModulation mode:OOK (AM)Working temperature:-10°C ~ +70°CSize:19 x 19 x 8mmFeatureStable performanceWider range of working voltagePinsPIN1 ATAD:data inputPIN2 VCC:power +PIN3 GND:power –ApplicationWireless calling system, burglar alarm, wireless data transmission, automated data acquisition systemReceiver Module …
3Pcs 315MHz XD-FST XD-RF-5V Wireless Transmitter Receiver Module Board Not Super-heterodyneRead More
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle Adjustable
$13.11Relay ModuleAdd to cartFeatures1. Trigger Signal Source:High Level Trigger (3.0 V-24 V), signal ground and system ground are not common, which can increase anti-interference abilitsystem (short circuit can also connect with a ground common)2. Output Capacity:can control no more than DC 30V 5A AC or 220 V devices 5A3. Optocoupler Isolation:improve the anti-interference ability, after the parameter setting, …
6-30V 1 Channel Relay Module Switch Trigger Time Delay Circuit Timer Cycle AdjustableRead More
3Pcs Wemos Motor Shield for WeMos D1 Mini I2C Dual Motor Driver TB6612FNGV1.0.0
$21.01Driver ModuleAdd to cartFeaturesI2C interfacePower supply voltage:VM=15V maxOutput current:Iout=1.2A(average) / 3.2A (peak)Standby control to save powerCW/CCW/short brake/stop motor control modesPins DescriptionVM:Motor power supply + (Max 15Vdc)GND:Motor power supply –A1 A2:Motor AB1 B2:Motor BS:Standby control port (in IO mode)More detail:Click Here!Package included3 x Motor Shield For WeMos D1 Mini
10Pcs TCRT5000 E2A3 1-Channel Smart Car infrared Tracking Sensor Detection PIR Sensor Module
$12.31Sensor & Detector ModuleAdd to cartProduct Usage1, the meter pulse data sampling2, fax machine shredder paper detection3, obstacle detection4, black and white line detectionProduct parametersInfrared reflection sensor:TCRT5000Detection reflection distance:1mm~25mmWorking voltage:5VOutput form:digital signal (0 and 1)Installation:with fixing bolt holesSmall board PCB size:3.5cm x 1cmSingle weight:4.5gFeaturesThe infrared emitting diode of the TCRT5000 sensor continuously emits infrared rays. When the emitted infrared rays …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car Kit
$28.96DIY Electronic KitsAdd to cartSpecificationsMaterial:WoodSize:approx. 12*7.6*12cmMulti-function:NoPower supply:2x AA Battery(not included)Foreign trade:YesDIY:Do it yourself according finished product painting in the package.ApplicationsInterest-building, parent-child communication, emotion, sensory,intellectual development, hands-on brain, hearing, interactive toys, grasping,hand-eye coordination, other abilitiesNote1.Please allow 1-3cm errors due to manual measurement.2.Due to the difference between different monitors, the pictures may not reflect the actual color of the item.Package Included5 …
5pcs DIY Technology invention Single-wing Wind Car Assembly Model DIY Car KitRead More
Reviews
There are no reviews yet.