10pcs 3S 18650 4A 11.1V BMS Li-ion Battery Protection Board 18650 Battery Charging Module Charger Electronic DIY
$34.67
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specifications
Charging Voltage:12.6V-13V
Overcharge Voltage Range:4.25V-4.35V ± 0.05V
Overpressure Voltage Range:2.3V-3.0V ± 0.05V
Upper Limit Operating Current:3A-4A
Upper Limit Instantaneous Current:9A-10A
Quiescent Current:less than 30uA
Internal Resistance:less than 100mohm
Effective Life:more than 30,000 hours
Operating Temperature:-40- +50 degrees
Storage Conditions:-40- +80 degrees
Size:53 * 16 * 3mm
Short Circuit Protection:protection, delay self-recovery
Applications
The power range is suitable for the following products:massager battery pack, LED light standby power supply, 12V electronic products, solar street light battery pack, monitor backup power supply, and other products.
Note:3A current discharge products above, the battery discharge rate to 3C or more.
Magnification Formula
1C magnification of the battery, 2000 capacity equal to 2AH * 1 = 2A upper limit current. 3C magnification battery, 2000 capacity equal to 2AH * 3 = 6A upper working current.
Note
1. The battery will heat when using it, it means the battery does not apply , please don’t keep using becuase the battery will be damaged soon.
2. The protection board can not be used for lithium iron phosphate battery, hernia lamp, hand drill battery pack, electric fish machine battery pack, electric bicycle battery pack, children’s car battery, 775 (4A)motor, 1W fish eye LED light!
3. Please strictly follow the wiring 0V (B -), 3.7V (B1), 7.4V (B2), 11.1V (B +), do not deliberately short circuit.
4. Please charge after connecting the line, then it will has output.
5. When connecting three groups of batteries, please ensure that the voltage of each group of batteries, if not the same, please fill each battery separately and then use in series. Discharge test, the voltage drops quickly when the group of battery time difference battery.
6. Please do not mix the battery and the poor battery together! 3 sets of battery capacity / resistance closer to the better! (Two good batteries +1 a poor battery use effect = 3 poor battery use effect).
Interface
The wiring is taken from B-
B- connected total negative
B1 connect the positive side of the battery
B + is soldered to the battery positive pole
P-welding line to charge and discharge the negative
P + solder the line to charge and discharge the positive pole.
Package Inckuded
10 x 3S 18650 4A 11.1V BMS Li-ion Battery Protection Board
Weight | 0.05 kg |
---|
Customers Also Viewed
Robotdyn SAMD21 M0-Mini 32 Bit ARM Cortex M0 Core 48 MHz Pins Soldered Development Board
$38.30Motherboard & Development BoardAdd to cartDimensional drawing:Click to openPinout:Click to openSchematic:Click to openTechnical ParametersMicrocontroller:ATSAMD21G18 48pins LQFPUSB-TTL converter:SAMD21 MCUPower Out:3.3V-800mAPower IN. USB:5VPower IN. VIN/DC Jack:5VPower Consumption:3.3V 220mALogic Level:3.3VUSB:Micro USBClock Frequency:48MHzOperating Supply Voltage:3.3VDigital I/O:20(7-PWM)Analog I/O:6Data RAM Type/Size:20KbData ROM Type/Size:128KbInterface Type:ISPOperating temperature:−40㎡°/+85㎡°Length*Width:56.5*18mmFeatureThe RobotDyn SAMD21 M0-Mini represents a powerful, 32-bit extension of the Ard-uino U NO platform, but to small size like Micro or …
Robotdyn SAMD21 M0-Mini 32 Bit ARM Cortex M0 Core 48 MHz Pins Soldered Development BoardRead More
CDCPH Super Capacitor 16v16.6f Automotive Rectifier Farad Capacitor instead of 16v20f
$32.43Electronic Accessories & SuppliesAdd to cartDescriptionVoltage:15-16 VCapacity:16.6 to 18 FWorking Temperature:-20-70 →Volume:62 Long 120 * Height * Thick 20MMMain performance:low ESR feature, large current can replace the battery.Package included1 x 16V16. 6F Supercapacitor
5pcs 5V USB Cooling Fan Governor LED Dimming Module Low Power Timer Board without Shell
$31.91Test & Measuring ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Product Highlights1.With soft-start function, the output voltage increases slowly and there is no inrush current, which can effectively extend the life of the fan motor or LED tube.2.The NC voltage regulation is …
5pcs 5V USB Cooling Fan Governor LED Dimming Module Low Power Timer Board without ShellRead More
T05-5500 5500mW 445nm Blue Laser Module TTL&PWM Modulation 2.54-3P+2.54-2P for EleksMaker DIY Laser Engraver
$263.24Laser ModuleAdd to cartSpecificationGeneral Specification Model:T05 Heatsink Material:Aircraft Aluminum Luminous Color:Blue Section Size:43mm x 43mm Cooling Mode:Heat Sink Groove, Cooling Fan Dimension:76 * 43 * 43mm Adapter Plug:US Plug Adapter Input Voltage:AC 100-240V Adapter Output Voltage:DC 12V 5A Can Engrave:MDF/Balsa/Paper/Wood/Fabric/Plastic/Leather/Plywood/Foam Paper/Anodized Aluminum Can Not Engrave:Metal/Glass/Stone/Ceramics/Stainless Steel/Reflective Material/ Transparent Material Technical Parameters Laser Power:5500mW Wavelength:445nm Beam Shape:Dot (Focusable) Working …
6S-JW12 6S 22.2V Polymer 18650 Lithium Battery Protection Board 14A Working Current 25.2V without Balanced
$5.79Battery Protection ModuleAdd to cartSpecificationContinuous discharge current:14AInstant discharge current:22ALithium battery charger:25.2VCharging current:25 (max)AOvercharge detection voltage:4.28 ÷0. 05 V single coreOvercharge protection delay:0.5SOvercharge release voltage:4. 08 + 0. 05V single coreOver-discharge detection voltage:2.55 + 0.08VOver-discharge detection delay:0.1SOver-discharge release voltage:2.9÷0.1VOvercurrent detection voltage:150mVOvercurrent detection delay:10mSOvercurrent protection current:75÷5 AOvercurrent protection release condition:disconnect the loadShort-circuit protection conditions:external load short-circuitShort circuit detection delay:250uSShort-circuit protection release …
Reviews
There are no reviews yet.