XH-M131 DC 12V Photosensitive Resistor Module Light Control Switch Photosensitive Relay Power Module
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Product model:XH-M131
Product Name:photosensitive relay module
Operating voltage:12V
Output mode:one channel relay
Overall size:52 x 31 x 31mm
Description
1. This product is mainly used for light detection, brightness detection and control and other occasions, through the potentiometer can be adjusted to detect brightness threshold. With the relay, it can do a variety of brightness detection switch, you can control a variety of street lights, to achieve automatic opening at night, automatically extinguished during the day.
2. Module uses 12V power supply with reverse connection protection function, the reverse power supply will not damage the module.
3. Normally open interface maximum load capacity:0V-125V/20A AC, DC 0V-14V/20A; the output module has three ports:public terminal (COM), normally open (CK) and normally closed (CB), the three port is equivalent to a double control switch, the relay coil is energized, the public often end with the beginning of. Without electricity, when the public end and the normally closed end of the pass; COM end by loading the cathode of a power supply, often start power cathode.
4. The sensitivity can be adjusted by potentiometer, and the starting relay threshold is set by adjusting the potentiometer. When the light is below the threshold, the module relay is pulled in, and when the threshold is light, the relay is disconnected.
5.The module has been upgraded again, has solved the critical phenomenon, and improved the relay control range, 12V-220V can be controlled.
6. This module can be used for light detection, brightness detection, with power indicator light (red) and relay indicator (blue), and with four M3 screw mounting holes, which is convenient to install, the board can adjust the sensitivity of the potentiometer, with relay, to do a variety of brightness detection control switch can be used, such as street lighting etc. during the day, night to open automatically, automatically extinguished, and other automation equipment.
Package included
1 x Photosensitive resistor module
1 x Probe cable
Weight | 0.021 kg |
---|
Customers Also Viewed
OPEN-SMART DC Jack Power 7~12V to DC5V/3.3V Step Down Converter Voltage Regulator Power Supply Module for Breadboad
$6.55Power Supply ModuleAdd to cartDescriptionThis is a mini LDO step-down power module based on AMS1117-5.0 and AMS1117-3.3, and it output fixed 5V / 3.3V.It is a small size, lightweight, especially for model airplanes, smart cars, DIY and other items, PCB experiment board project design, breadboard project design.Features– Module type:LDO step-down module;– Onboard 500mA resettable fuse to protect the power …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY Parts
$5.45DIY Electronic KitsAdd to cartFeatureSize:5.8*3.7cm Power supply voltage:DC 5VFunction introductionRP1, R1, R2, R3 and RT in the circuit form a temperature measuring bridge. When the temperature is below the preset temperature, the potential of pin 2 of UA741 is higher than that of pin 3, pin 6 of 741 outputs a low level, LED1 is on, and the buzzer …
Temperature Alarm Kit thermistor Electronic Teaching Experiment Training Welding DIY PartsRead More
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node Module
$18.41Smart ModuleAdd to cartFeatureThis module is mainly controlled by ESP8266-01/ESP-01S, and DHT11 is a temperature and humidity sensor. The temperature and humidity in the ESP8266 acquisition environment are uploaded to the server. Support 3.7v-12V DC power supply (3.7V lithium battery). Can be used as a temperature and humidity collection node for smart home or IOT projects.CharacteristicMaster:ESP-01/ESP-01S (This module …
5pcs ESP8266 ESP-01 ESP-01S DHT11 Sensor Temperature and Humidity WiFi Node ModuleRead More
2Pcs/Pack Plastic Tire Wheel with DC 3-6v Gear Motor for Smart Car
$13.93Smart Robot & Solar PanelAdd to cartSpecificationMotor1. Voltage:DC 3V-6V2. Current:100 MA-120MA3. Reduction rate:48:14. RPM (With tire):100-2405. Tire Diameter:65mm6. Car Speed(M/minute):20-487. Motor Weight (g):29/each8. Motor Size:70mm X 22mm X 18mm9. NoiseTire Parameter1. Center hole:5.3MM x 3.66MM2. Wheel size:65 x 26mmPackage Included2 x Smart Car Robot Plastic Tire Wheel2 x DC Gear Motor
ACS714 5A 5V Current Sensor Breakout Board Isolate Filter Resistance Capacitor Hall Effect Module
$16.23Sensor & Detector ModuleAdd to cartIntroductionThis current sensor is a carrier board or breakout board for Allegro’s ACS715LLCTR-30A-T Hall effect-based linear current sensor, The sensor operates at 5 V and has an output sensitivity of 133 mV/A. The board ships fully populated with its SMD components.FeatureDesigned for unidirectional input current from 0 to 5 A, but the sensor will provide …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication Module
$21.86Motherboard & Development BoardAdd to cartIntroduction CAN-BUS is a common industrial bus because of its long travel distance, medium communication speed and high reliability. It is commonly found on modern machine tools and as an automotive diagnostic bus. This CAN-BUS Shield adopts MCP2515 CAN Bus controller with SPI interface and MCP2551 CAN transceiver to give your /Seeeduino CAN-BUS capibility. With …
SPI MCP2515 EF02037 CAN BUS Shield Development Board High Speed Communication ModuleRead More
Reviews
There are no reviews yet.