ZB2L3 18650 Battery Capacity Tester External Load Discharge Type 1.2-12V Tester with 2 7.5 Resistors
$15.30
Type With 2*5W+1*50W Resistor / Type With 1*50W Resistor / Type With 2*5W Resistor /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Power supply voltage:DC4.5-6V (micro USB interface)
Working current:no more than 70mA
Discharge voltage:1.00V-15.00V resolution 0.01V
Termination voltage range:0.5-11.0V
Support current through:maximum 3.000A resolution 0.001A
Maximum voltage measurement error:1% + 0.02V
Maximum current measurement error:1.2%+-0.002A
The highest battery capacity range:9999Ah (1Ah=1000mAh). The larger value is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it is above 10Ah, it is displayed as XX.XX, and so on.
Board size:50mmX37mm
Finished product size:50mmX37mmX17mm (length X width X height maximum position size, including copper foot height)
Board and accessories weight:single board 28g (including copper column), two 5W ceramic resistor 9g, 50W resistance about 27g (including line)
Note
In order to improve the voltage measurement accuracy, this circuit specially designed the DC offset. When the terminal is not connected, it will display a small voltage, which does not affect the actual measurement. If you short-circuit the input terminal (absolute 0V), it will display 0. . If you want to understand the principle, you can check the superposition theorem in electrical engineering.
During the use of resistance discharge, the resistance load will be severely heated, please pay attention to safety! 50W aluminum shell resistor (has been welded a high temperature wire), please install it on the metal plate!
Instructions
1. The battery under test should be fully charged first.
2. Connect the positive pole of the battery under test to the positive input, the negative pole to the input negative pole, and the reverse polarity (the reverse connection with the load may damage the circuit)! Connect the load to the output positive and output negative, and give the tester micro USB working power (not available for desktop or notebook USB), and the battery voltage is displayed.
3. To start the test directly, just press the “OK Inch button, the tester can automatically set the appropriate termination voltage according to the battery full charge voltage, and will flash the display 3 times to start the test. Need to manually set the termination voltage only need to press the inch+inch or inch-inch button to modify the battery voltage display state, the termination voltage display is P beginning, the latter represents the voltage value, the resolution is 0.1V, after setting, press inchOKinch inchstart testing.
4. After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, and the display data stays on the capacity (Ah) and flashes rapidly with the corresponding indicator light. The capacity displayed at this time is the actual discharge capacity of the battery. “OK Inch can terminate the flashing to make the data display stably. Press the “OK Inch button again to return to the power-on state and replace the battery test.
Error code and meaning
Err1:Battery voltage is higher than 15V
Err2:Battery voltage is lower than the set termination voltage
Err3:The battery cannot withstand the load discharge current or the line internal resistance is too large
Err4:The current is too large (current exceeds 3.1A)
Err5:Improper use or wiring error has caused the device to burn out and cannot be used (current sampling or control switch MOS burned)
Secondary calibration operation (after self-running calibration, it means to give up the warranty)
Press and hold the three buttons at the same time to power on the tester, enter the calibration mode, first display the number of calibration records and then enter the official calibration sampling program display 0u0A, then short-circuit the input positive and negative, then press the inchOKinch button to complete the display J10u, Apply 10.00V standard DC voltage between the input positive and negative poles, then press the “OK Inch button, then display J2.0A, apply 2.0A constant DC current to the output negative pole (inflow direction) and input negative pole (outflow direction) and press Move the “OK Inch button to complete the calibration. The tester pre-audits the calibration data. If the calibration data is reliable, it will display 4 calibration numbers and then exit. If the pre-audit considers the data to be unreliable, the data will be discarded.
Package includes
1 x Tester
1/2/3 x Resistor (optional)
Weight | 0.08 kg |
---|
Customers Also Viewed
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10A
$54.90Relay ModuleAdd to cartFeatureIf you need to control the AC power (lights, home equipment’s), a thyristor is what you need. This is a very common thyristor module with very low on-resistance and a control voltage, that is compatible with any 3.3V or 5V micro-controller or mechanical switch. This allows you to control high-power devices with very low-power control …
10Pcs RobotDyn Thyristor AC Switch Relay Module 3.3V/5V Logic AC 220V/5A Peak 10ARead More
Glass Transparent Cell Spreader Bacteria Wide Spreading Bar Polished Ends Biological Experiment
$15.30Laboratory BottleAdd to cartDescriptionGlass Transparent Wide Cell Spreading Bar Used for Biological ExperimentSpecificationMaterial:GlassColor:ClearFeatures1.Suitable for us to swirl the spreader around the dish to evenly distribute the cells or bacteria with applying much pressure.2.Smooth shape end makes spreading easy.3.Eco-friendly Material and good design. 4.Easy sterilization.NoticeThe spreader should be back in alcohol or ethanol to keep it clean and prevent …
3pcs 78M05 Mini Voltage Regulator Module with Pin High Accuracy Low Power Consumption LO7805MA 5V
$6.93Boost & Buck ModuleAdd to cartFeatures1. Used in small power motors, cameras, electric toys, LED lighting, etc.2. The product has high accuracy whose range is ±2%3. With thermal overload protection, short circuit protection and output switching SOA protection4. The product has ±2% output voltage toleranceSpecificationsHigh Accuracy:±2%Quiescent Current:6mAWorking Temperature:-40→ ~ + 125→Size:18 x 10.5 x 5mm5VInput Voltage:DC 7-25V, Output Voltage:DC 5VOutput …
234Pcs Upgraded Outdoor Emergency Survival Kit Gear SOS First Aid for Home office Boat Camping Hiking
$64.79Lab Clamp & StandAdd to cartSpecificationBag Color:RedSize:260*80*180mm(L*W*H)Quantity:234 PCSFeatures– Small size and easy to carry.– First aid dedicated, fully equipped.– A good choice for emergency situation.– Essential items for going out or at home.– Multifunctional, practical and convenient.– With quality hardware zipper, easy to open and close.– Made of high quality material, waterproof, high wear resistance.– Can be used for outdoor …
5Pcs 3S 12.6V 6A BMS Li-ion Lithium Battery Protection Board 18650 Power Bank Balance Battery Board
$24.04Battery Protection ModuleAdd to cartFeatureSize:about 56×33.5x12mmUpper operating current:8AUpper transient current:40A÷5AOvercharge range:4.25÷0.05VOver disvoltage range:2.5÷0.05VCharging voltage:12.6-13VFunction:over charge/ over discharge/short circuit/ over current protectionPackgae includes5 x Battery Protection Board
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush Kit
$10.11Laser SightAdd to cartSpecificationMaterial:Brass, Steel, NylonLength:17.2cm / 6.8inchLarge End Brush Size (L*W*H):37x7x12mmSmall End Brush Size (L*W*H):22x2x8mmFeatures– Includes 3 brushes, 3 types of double-ended brushes:Brass, Steel, Nylon.– Versatile cleaning capabilities with both a large and small end, 7 inch total length for cleaning all sorts of hard-to-reach spaces.– The steel and brass brush help to clean stubborn areas on …
3Pcs Double End Cleaning Brush Set Brass Steel Nylon Wire Brush KitRead More
100-240V Power Adapter Power Supply Adaptor Plugs AU Standard
$16.19AC/DC AdaptersAdd to cartPower Supply Adaptor for Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105SpecificationsInput:AC 100-240V, 50/60HzOutput:DC 12V 1AColor:BlackSize(Approximately):7.8*4.9*3.2cm(approx.)Wire length(Approximately):93cmPlug type:AU PlugFeatures-Voltage Protection-Short Circuit Protection-Current Protection-Sealed for protection against moisture and humidityApplicationFor Makita Radio BMR100 BMR100W BMR102 BMR105 DMR105Package included1 x Adaptor
Reviews
There are no reviews yet.