ZB2L3 18650 Battery Capacity Tester External Load Discharge Type 1.2-12V Tester with 2 7.5 Resistors
$15.30
Type With 2*5W+1*50W Resistor / Type With 1*50W Resistor / Type With 2*5W Resistor /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Power supply voltage:DC4.5-6V (micro USB interface)
Working current:no more than 70mA
Discharge voltage:1.00V-15.00V resolution 0.01V
Termination voltage range:0.5-11.0V
Support current through:maximum 3.000A resolution 0.001A
Maximum voltage measurement error:1% + 0.02V
Maximum current measurement error:1.2%+-0.002A
The highest battery capacity range:9999Ah (1Ah=1000mAh). The larger value is switched by the decimal point shift. When it is lower than 10Ah, it is displayed as X.XXX, and when it is above 10Ah, it is displayed as XX.XX, and so on.
Board size:50mmX37mm
Finished product size:50mmX37mmX17mm (length X width X height maximum position size, including copper foot height)
Board and accessories weight:single board 28g (including copper column), two 5W ceramic resistor 9g, 50W resistance about 27g (including line)
Note
In order to improve the voltage measurement accuracy, this circuit specially designed the DC offset. When the terminal is not connected, it will display a small voltage, which does not affect the actual measurement. If you short-circuit the input terminal (absolute 0V), it will display 0. . If you want to understand the principle, you can check the superposition theorem in electrical engineering.
During the use of resistance discharge, the resistance load will be severely heated, please pay attention to safety! 50W aluminum shell resistor (has been welded a high temperature wire), please install it on the metal plate!
Instructions
1. The battery under test should be fully charged first.
2. Connect the positive pole of the battery under test to the positive input, the negative pole to the input negative pole, and the reverse polarity (the reverse connection with the load may damage the circuit)! Connect the load to the output positive and output negative, and give the tester micro USB working power (not available for desktop or notebook USB), and the battery voltage is displayed.
3. To start the test directly, just press the “OK Inch button, the tester can automatically set the appropriate termination voltage according to the battery full charge voltage, and will flash the display 3 times to start the test. Need to manually set the termination voltage only need to press the inch+inch or inch-inch button to modify the battery voltage display state, the termination voltage display is P beginning, the latter represents the voltage value, the resolution is 0.1V, after setting, press inchOKinch inchstart testing.
4. After the test starts, the tester will turn on the electronic switch that controls the load. The test process data display will be displayed between the discharge capacity (Ah), the current discharge current (A) and the battery voltage (V). When the battery voltage reaches the set termination voltage, the tester cuts off the load control switch, and the display data stays on the capacity (Ah) and flashes rapidly with the corresponding indicator light. The capacity displayed at this time is the actual discharge capacity of the battery. “OK Inch can terminate the flashing to make the data display stably. Press the “OK Inch button again to return to the power-on state and replace the battery test.
Error code and meaning
Err1:Battery voltage is higher than 15V
Err2:Battery voltage is lower than the set termination voltage
Err3:The battery cannot withstand the load discharge current or the line internal resistance is too large
Err4:The current is too large (current exceeds 3.1A)
Err5:Improper use or wiring error has caused the device to burn out and cannot be used (current sampling or control switch MOS burned)
Secondary calibration operation (after self-running calibration, it means to give up the warranty)
Press and hold the three buttons at the same time to power on the tester, enter the calibration mode, first display the number of calibration records and then enter the official calibration sampling program display 0u0A, then short-circuit the input positive and negative, then press the inchOKinch button to complete the display J10u, Apply 10.00V standard DC voltage between the input positive and negative poles, then press the “OK Inch button, then display J2.0A, apply 2.0A constant DC current to the output negative pole (inflow direction) and input negative pole (outflow direction) and press Move the “OK Inch button to complete the calibration. The tester pre-audits the calibration data. If the calibration data is reliable, it will display 4 calibration numbers and then exit. If the pre-audit considers the data to be unreliable, the data will be discarded.
Package includes
1 x Tester
1/2/3 x Resistor (optional)
Weight | 0.08 kg |
---|
Customers Also Viewed
20pcs Sound Module for Electronic Toy IC Chip Voice Recorder 120s 120secs Recording Playback Talking Music Audio Recordable Board Gift
$85.21Other Module BoardAdd to cartSpecificationsOperating Voltage:3-5VStandby CurrentRecording Time:120sRecording Input:adopt ADC 14 Bit,Audio Out DAC 14 BitRecording Voice Format:ADPCMRecording Distance:3-5mRecording/Voice Play Mode:independently play a piece of sound recording or play a piece of prerecordig voiceCycle Mode Play:can set cycle play times or constant cycle playPrerecording voice is burnt from external to SPI Flash,can prerecord chord music or voiceAdaptive Loudspeaker:8-32 ohm …
10pcs 130 Small Motor DIY Homemade Fan Toy Accessories
$10.33Module ComponentsAdd to cartFeatureThree-leaf soft paddle, the central ring yellow cap is ABS green plastic, the surrounding fan blade is super soft silicone material, even if it is touched by hand when transporting, it will not be injured, it is very suitable for young makers DIY use; Used with the motor will make your DIY work more convenient.MotorSize:25*20*15mm3-6V …
10pcs 130 Small Motor DIY Homemade Fan Toy AccessoriesRead More
10pcs CJMCU-9930 APDS-9930 Proximity and Non Contact Gesture Recognition Detection Attitude Sensor
$33.33Sensor & Detector ModuleAdd to cartFeatures• Optical modules integrated with ALS, infrared LEDs and proximity detectors• Ambient Light Sensing (ALS) – Approximate human visual response – Programmable interrupt capability with upper and lower thresholds – Up to 16-bit resolution – High sensitivity operation behind dark glass – 0.01lux low lumen performance• Proximity detection – Fully calibrated to 100 mm detection …
150pcs LED RGB Common Cathode 4-Pin F5 5MM Diode
$19.32Electronic Accessories & SuppliesAdd to cartFeaturesConvenient for DIY and repair equipment and electrical appliancesPerfect use for home, office and industry electrical equipment and electrical appliancesCurrent:20mAVoltage:3VSize:5mm Light Color:RED, BLUE, GREENPackage included150 x Cathode 4-PINS F5 5mm LED Light
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish Tank
$32.87Electronic Accessories & SuppliesAdd to cartSpecifications1. Volt:220v2. Power:100w3. Microcomputer control,Power off memory function4. Made of high-intensity anti-explosion and corrosion protection material5. Ideal for use in either saltwater or freshwater aquariums6. Electronic temperature control, high accuracy:±1→7. Easy to read and adjust the temperature8. Fixed to the glass by suction9. Adjustable temperature is 16-36 degreePackage included1 x Fish tank heater1 x English …
220V 100W Adjustable Submersible Aquarium Water Heater thermostat Fish TankRead More
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator Module
$10.84Boost & Buck ModuleAdd to cartDescription– DC DC Boost Converter Module working frequency 1MHZ. – Up to 93% Efficiency (usually is 84%-91%) – Quiescent current:190uA.– Current Limit Program(0.5-2.5A,Default 1.8A) – Size:21 x 11 x 4mm– Weight:1.5g– ProtectionOver current protection(OCP)Over voltage protection(OVP)Short circuit protection(SCP)Over temperature protection(OTP) Output 5VInput voltage DC 2.6 ~ 4.5V,output DC 5V±3%Maximum output:5V/1300MA(See the table below for details) …
3pcs 7W Mini DC DC Boost Step Up Converter 2.6-5.5V to 5V Voltage Regulator ModuleRead More
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling Heatsink
$15.34Electronic Accessories & SuppliesAdd to cartFeatures3pin ultra silent LED case fan.Each fan is With 15 LED lights.Connect to power supply or motherboard.Anti-vibration rubber pads on all four corners keep the fan super silent.It offers incredible cooling to increase the longevity and stability of the system and components.Cooling fan for desktop computer case and CPU cooler.SpecificationLED Light Color:Colorful MarqueeCompatible CPU:Computer Case …
120mm PC Case Fan Computer Ultra Silent LED Lights Cooler Cooling HeatsinkRead More
Reviews
There are no reviews yet.