DC 12-24V 200W 3 Channel D Class 2.1 Digital Power Amplifier Board High Power Bass Speaker
$44.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Operating voltage:DC 12 – 24V (recommended 19V 4.74A)
Output impedance:Subwoofer 2 – 8Ω, left and right channels 4 – 8Ω
Output power:Subwoofer 100W (24V power supply / 3Ω load)
Left and right channel 50W (24V power supply / 4Ω load)
Input impedance:20KΩ
Signal input:800-1500mV P-P
Frequency response:20Hz-20KHz (± 3dB) / left and right channels
20-180Hz / subwoofer
Distortion:bass
Left and right channel
Board size:100 x 84.5 x 28mm (excluding the potentiometer and other outlet protruding parts)
Features
1. Power-on delay output protection (need to use the amplifier board comes with the switch), no impact, to protect the expensive speaker unit
2. Output power, distortion is small, high degree of sound reduction. No noise, interference current sound
3. comes with a large current toggle switch, you can completely turn off the amplifier output, no need to frequently plug the power
4. A variety of audio input, the standard 3.5MM audio cable input socket, or from the 3P socket input audio to meet the different modules connected
5. Support to connect MP3 decoding module, comes with power supply output
6. Design anti-anti-circuit, to avoid improper use or power polarity damage to the amplifier board
7. The use of high-quality soil Hao gold slotted radiator, high-end, the atmosphere, on the grade
8. The use of imported chips, high-quality components, SMT chip technology, reliable quality, cost-effective
9. Product layout is reasonable, beautiful color, like a fine art
Product introduction
The power amplifier board for the welding of finished products, fool-type wiring. Directly connected to power, audio, passive speakers to work. This product uses two TPA3116D2 digital amplifier chip as the core, one to do about the channel power amplification, a bridge drive subwoofer, with small size, high efficiency, high power and so on. Materials used regardless of cost, capacitance for the WIMA, Siemens, Nikon fever capacitor. High-quality Taiwan-made high-quality sealed potentiometer, original TPA3116 chip, dedicated bass audio chip. Board circuit is simple, reliable. Operating voltage Single power supply 12V-24V. Left and right channel output 50W*2, subwoofer output 100W, the efficiency can reach more than 90%. Board small size, use and installation are very flexible and convenient. All components used in the use of genuine devices, can be long-term stable work.
Description
It is recommended to use 19V / 4-6A power supply, then connect with subwoofer, subwoofer 5-10 inch, impedance 2-4 ohms, speaker sensitivity of about 90dB, speaker power 40W-200W; left and right channel connected to a pair of satellite , Speaker 4-6 inch, impedance 4-8 ohms, speaker sensitivity of about 90dB, speaker power 30W-60W, can be two frequency bookshelf box.
Need to reach the power, you can use 24V / 5-10A power supply, then subwoofer one, subwoofer 6-12 inch, impedance 2-4 ohms, speaker sensitivity of about 90dB, speaker power 60W-200W; left and right channel satellite Box a pair of speakers 4-6 inch, impedance 4-8 ohms, speaker sensitivity of about 90dB, speaker power 40W-80W, can be two frequency bookshelf box.
Do not need a lot of output power, you can use 12V-15V / 3A-5A above power, then subwoofer one, subwoofer 4-6 inch, impedance 2-4 ohm, speaker sensitivity of about 90dB, speaker power 30W- 100W; left and right channel connected to a pair of satellite, speakers 2.5-5 inch, impedance 4 ohms, speaker sensitivity of about 90dB, speaker power 10W-50W, can be two frequency bookshelf box.
Note
The amplifier is connected to the speaker, not the speaker! Speaker is a speaker of the accessories, not equal to the speaker, the effect is different. If the speaker is not installed as a speaker, although the same will sound, but because the cone before and after the vibration of the sound phase is opposite, will cause the sound offset each other (commonly known as acoustic short circuit), causing the sound small! And the speaker is no box, there is no resonance cavity, can not produce bass!
If you make your own speakers, please follow the general speaker production tutorial operation, scientific calculation of a good box volume, guide tube size, frequency divider frequency points, subwoofer without frequency, must thick wood, paste sound-absorbing cotton, do a good job can not leak.
Package included
1 x 200W 3 channel D class 2.1 digital power amplifier board
Weight | 0.131 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.