DC 12-24V 200W 3 Channel D Class 2.1 Digital Power Amplifier Board High Power Bass Speaker
$44.33
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Operating voltage:DC 12 – 24V (recommended 19V 4.74A)
Output impedance:Subwoofer 2 – 8Ω, left and right channels 4 – 8Ω
Output power:Subwoofer 100W (24V power supply / 3Ω load)
Left and right channel 50W (24V power supply / 4Ω load)
Input impedance:20KΩ
Signal input:800-1500mV P-P
Frequency response:20Hz-20KHz (± 3dB) / left and right channels
20-180Hz / subwoofer
Distortion:bass
Left and right channel
Board size:100 x 84.5 x 28mm (excluding the potentiometer and other outlet protruding parts)
Features
1. Power-on delay output protection (need to use the amplifier board comes with the switch), no impact, to protect the expensive speaker unit
2. Output power, distortion is small, high degree of sound reduction. No noise, interference current sound
3. comes with a large current toggle switch, you can completely turn off the amplifier output, no need to frequently plug the power
4. A variety of audio input, the standard 3.5MM audio cable input socket, or from the 3P socket input audio to meet the different modules connected
5. Support to connect MP3 decoding module, comes with power supply output
6. Design anti-anti-circuit, to avoid improper use or power polarity damage to the amplifier board
7. The use of high-quality soil Hao gold slotted radiator, high-end, the atmosphere, on the grade
8. The use of imported chips, high-quality components, SMT chip technology, reliable quality, cost-effective
9. Product layout is reasonable, beautiful color, like a fine art
Product introduction
The power amplifier board for the welding of finished products, fool-type wiring. Directly connected to power, audio, passive speakers to work. This product uses two TPA3116D2 digital amplifier chip as the core, one to do about the channel power amplification, a bridge drive subwoofer, with small size, high efficiency, high power and so on. Materials used regardless of cost, capacitance for the WIMA, Siemens, Nikon fever capacitor. High-quality Taiwan-made high-quality sealed potentiometer, original TPA3116 chip, dedicated bass audio chip. Board circuit is simple, reliable. Operating voltage Single power supply 12V-24V. Left and right channel output 50W*2, subwoofer output 100W, the efficiency can reach more than 90%. Board small size, use and installation are very flexible and convenient. All components used in the use of genuine devices, can be long-term stable work.
Description
It is recommended to use 19V / 4-6A power supply, then connect with subwoofer, subwoofer 5-10 inch, impedance 2-4 ohms, speaker sensitivity of about 90dB, speaker power 40W-200W; left and right channel connected to a pair of satellite , Speaker 4-6 inch, impedance 4-8 ohms, speaker sensitivity of about 90dB, speaker power 30W-60W, can be two frequency bookshelf box.
Need to reach the power, you can use 24V / 5-10A power supply, then subwoofer one, subwoofer 6-12 inch, impedance 2-4 ohms, speaker sensitivity of about 90dB, speaker power 60W-200W; left and right channel satellite Box a pair of speakers 4-6 inch, impedance 4-8 ohms, speaker sensitivity of about 90dB, speaker power 40W-80W, can be two frequency bookshelf box.
Do not need a lot of output power, you can use 12V-15V / 3A-5A above power, then subwoofer one, subwoofer 4-6 inch, impedance 2-4 ohm, speaker sensitivity of about 90dB, speaker power 30W- 100W; left and right channel connected to a pair of satellite, speakers 2.5-5 inch, impedance 4 ohms, speaker sensitivity of about 90dB, speaker power 10W-50W, can be two frequency bookshelf box.
Note
The amplifier is connected to the speaker, not the speaker! Speaker is a speaker of the accessories, not equal to the speaker, the effect is different. If the speaker is not installed as a speaker, although the same will sound, but because the cone before and after the vibration of the sound phase is opposite, will cause the sound offset each other (commonly known as acoustic short circuit), causing the sound small! And the speaker is no box, there is no resonance cavity, can not produce bass!
If you make your own speakers, please follow the general speaker production tutorial operation, scientific calculation of a good box volume, guide tube size, frequency divider frequency points, subwoofer without frequency, must thick wood, paste sound-absorbing cotton, do a good job can not leak.
Package included
1 x 200W 3 channel D class 2.1 digital power amplifier board
Weight | 0.131 kg |
---|
Customers Also Viewed
M5Stack 8-Way Servo HAT STM32F030F4 Microcontroller Control Board for M5StickC ESP32 IoT Development Board
$16.96Other Module BoardAdd to cartDescription 8Servos HAT is an 8-way servo control board compatible with M5StickC. The brains of the borad is the STM32F030F4 microcontroller which communicates with M5StickC through I2C. In order to ensure that multiple servos can work at the same time, the HAT is equipped with a separate 16340 battery base for an external and independent …
Screw Shield V3 Terminal Expansion Board for UNO R3
$8.73Expansion Board & ShieldAdd to cartScrew Shield V3 Terminal Expansion Board For Compatible UNO R3DescriptionWe use to do work, always feel bad connection on the port. Either use bread plates into line, either using the sensor cable expansion board with Dupont, feel less reliable, and now we launch a terminal expansion board can be directly screwed onto the thread of …
Screw Shield V3 Terminal Expansion Board for UNO R3Read More
CH340G RS232 Upgrade USB to TTL Auto Converter Adapter STC Brush Module
$6.55Converter BoardAdd to cartFeaturesThere are power light PWR, and TXD and RXD indicatorsReserve RTS, CTS location3.3V and 5V dual voltage selectionSupport XP/WIN7/WIN8/WIN10 systemAnti-short-circuit, anti-overcurrent, anti-reverse, anti-high voltage multiple protection.Package includes1 x Module
10pcs CJMCU-8575 PCF8575 Bidirectional IIC I2C And SMBus I/O Expander Expansion Board
$80.46Expansion Board & ShieldAdd to cartDescriptionHave you run out of I/O pins This great IC allows the user to expand up to 16 I/O using only two I/O for control! The PCF8575C is controlled through an I2C interface and features 16-bits of quasi-bidirectional input/output pins.Package included10 x Module
5pcs 30MA 5V 0.15W Mini Solar Panel Epoxy Board
$16.04Smart Robot & Solar PanelAdd to cartSpecifications– Maximum power:0.15 (W)– Working current:0-30MA(Depending on the intensity of sunlight)– Working voltage:5 (V)– System voltage:5.5 (V)– Open circuit voltage:5.5 (V)– Short circuit current:0.05(A)– Dimensions:about 53*30 (mm)– Weight:about 12g– For:DIYer– Quantity:5PcsPackage Included5 x solar panel
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog Signal
$55.28Sensor & Detector ModuleAdd to cartDescriptionThis module is fully compatible with ARDUINO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. This module mainly includes infrared transmitter and photosensitive receiver. The infrared transmitter is on one side of the finger, and the photosensitive receiver is on the other side of the finger; the photosensitive receiver …
20Pcs Keyes Brick Finger Heartbeat Module(Pad hole) with Pin Header Board Analog SignalRead More
Reviews
There are no reviews yet.