Ebyte E90-DTU-900SL22-GPRS LoRa to 4G SX1262 22dBm 915MHz RF to GPRS PA LNA Wireless Transceiver Modem Serial Port Server
$278.38
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
NET characteristicsParameter Value
Supported frequency bands Quad-band:GSM850, EGSM900, DCS1800, PCS1900
Module can search frequency automatically
Band selection can be set by AT command
Compliant with GSM Phase 2/2 +
GPRS connection characteristics GPRS multi-slot class 12 (default)
GPRS multi-slot class 1 ~ 12 (configurable)
GPRS mobile station class B
GPRS data characteristics GPRS data downlink transmission:up to 85.6kbps
GPRS data uplink transmission:Max 85.6kbps
Encoding format:CS-1, CS-2, CS-3, and CS-4
Supports the PAP (Password Authentication Protocol) protocol commonly used for PPP connections
Supports the protocol commonly used for CHAP (Query Handshake Authentication Protocol)
Embedded protocol:TCP / UDP / FTP / PPP / HTTP / NTP / MMS / SMTP / PING etc.
Support for Unstructured Supplementary Data Services (USSD)
Antenna Interface SMA interface, NET signal output, 50 ohm characteristic impedance
Transmit power Class 4 (2W):GSM850 and EGSM900
Class 1 (1W):DCS1800 and PCS1900
RF characteristicsParameter value
Air speed 2.4kbps, 8 levels adjustable (0.3, 1.2, 2.4, 4.8, 9.6, 19.2, 38.4, 62.5kbps)
WOR role Receiver (configurable as receiver / sender)
WOR cycle 2000ms, (configurable from 500ms to 4000ms)
Transmit power 22dBm, 4 levels adjustable (22, 17, 13, 10dBm)
transfer method Transparent transmission (can be configured as transparent transmission or fixed-point transmission)
Module address 0 ~ 65535 (default address 0)
Working frequency 850.125MHz~930.125MHz
Receiving sensitivity -138dbm ~ 0.3kbps
Baud rate 115200bps (does not support modification)
Antenna interface SMA interface (RF signal output, 50 ohm characteristic impedance)
Radio system parametersParameter value
Current consumption (typical) 66.5mA@12V (no data transmission in idle state)
Operating temperature -30 → ~ + 70 → (extended temperature -40 → ~ + 85 →)
Operating Volt. DC8 ~ 28V (recommended 12V / 24V power supply)
Size 108 * 75 * 37mm (excluding antenna)
Package included
1 x Wireless Transceiver
Weight | 0.1 kg |
---|
Customers Also Viewed
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-W
$90.79Amplifier BoardAdd to cartSpecifications– Supply Voltage:2.7v-5.5v @ 3mA current– Output:2Vpp on 1.25V bias– Frequency Response:20Hz – 20KHz– Programmable Attack and Release Ratio– Automatic gain, selectable max from 40dB, 50dB or 60dB– Low Input-Referred Noise Density of 30nV/– Low THD:0.04% (typ)– Low Power Shutdown Mode– Built-in 2V low-noise microphone bias– -40°C ~ +85°C extended temperature rangePackage included10 x Microphone …
10pcs MAX9814 High Performance Microphone AGC Amplifier Module CMA-4544PF-WRead More
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMP
$19.04Amplifier BoardAdd to cartFeature1. The power to more than 12V current 3A2. The speaker is best to use an impedance of 4 ohms, some of the high sensitivity3. For some signal level is relatively low tone, to add the preamplifier to play the effect4. Note the positive and negative can not be reversed, use the power supplyElectrical CharacteristicsIts …
T-AMP 2 x 15W TA2024 Digital Audio Amplifier Board Mini AMPRead More
Mega 2560 R3 ATmega2560-16AU Control Module without USB Cable
$44.54Motherboard & Development BoardAdd to cartDescriptionThis is compatible R3 Mega2560 ATmega2560-16AU control board without USB cableMega is an ATmega2560 as core microcontroller development board itself has 54 groups digital I / O input / output terminal (14 groups do PWM outputs), 16 sets of simulation than the input side, group 4 UARTs (hardware serial ports), using the 16 MHz crystal …
Mega 2560 R3 ATmega2560-16AU Control Module without USB CableRead More
20W 420*380*3mm Folding PET Monocrystalline Silicon Solar Panel with Cable Dual USB
$93.62Smart Robot & Solar PanelAdd to cartSpecificationsMaximum Power(Pmax):20WOpen Circuit Voltage(Voc):18VMaximum Power Voltage(Vmp):12vMaximum Power Current(Imp):1.1AMaximum System Voltage(Imp):1000vOutput:USB 5V & DC 18VQuantity of cell:36Cell Effcience %:20%Output Tolerance:±10%Size:425*380*3mmStandard Test Conditions:Irradiance 1000w/m2Temoerature 25.C,AM=1.5Package Included1 x Solar panel with cable
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLC
$45.10Relay ModuleAdd to cartDescriptions– Operating Voltage:DC 5V(5V Version)– Operating Current:10-15MA– inchopeninch inchcloseinch inchMomentaryinch inchSelf-lockinginch inchInterlockinch inchDelayinch 6 Commands– Two instruction-control mode:AT command and MODBUS command– Under the AT command ,the maximum delay is 9999 seconds– Under the MODBUS command ,the maximum delay is 255 seconds– AT commands can be made serial HyperTerminal (serial assistant) Enter;– MODBUS commands can …
5pcs 8Channel DC 5V RS485 Modbus RTU Control Module UART Relay Switch Board PLCRead More
LT1083cp 7A AC 35V Rectifier Filter Power Supply Board DIY Home theater Sound Amplifier Voltage Regulator
$24.04Power Supply ModuleAdd to cartDescriptionLT1083CP feature description (emphasis):It is a linear step-down block. Although the voltage adjustment can be adjusted from 2.5V to 37V, it is recommended that the working differential pressure is within 10V, because the power consumption is proportional to the differential pressure, the greater the differential pressure, the more heat The larger the output current, the …
Reviews
There are no reviews yet.