TPA3116D2 bluetooth 5.0 HIFI Digital Power Amplifier 2.1 High-power Board 12-24V Subwoofer Bass Board
$38.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:TPA3116D2 2.1 high-power HIFI digital power amplifier board
Chip type:TPA3116D2
Chip protection:overvoltage, undervoltage, overheating, DC detection and short circuit
Operating voltage range:DC 12-24V (current 4A or more)
Audio input sensitivity:500-800mV,
Frequency response range:20Hz-20KHz
Speaker Impedance
Left and right channel speakers:3.5-8 Ohm
Bass speaker Impedance:2-8 Ohm
The maximum output power:50W (left channel) +50 W (right channel) +100 W (subwoofer)
Maximum output power:100w (2 ohm speakers connected)
Number of channels:2-channel stereo
Size:101* 100 * 26mm
Packaging Included
1 x TPA3116 Digital Amplifier Board
Product Questions
1. Amplifier board has current sound and noise during use
Most of our amplifier board use DC power supply. The board itself does not produce current sound and noise.
The main causes of current acoustic noise are
A, The power supply filter used is not good; the current sound is caused by wrong input by the power or audio input.
B, The input signal quality is poor; the output of the device connected to the input is improper, and the noise is caused by the abnormal input of the audio source.
C, The input cable is of poor quality; the line is in poor connect; the wiring is damaged; the wiring is suspended
D, The input connection has other playback devices, and some devices share the power supply to cause noise.
2. No sound output, no sound in 1 channel
A, The speaker is broken, or the speaker cable is not connect well.
B, The input cable is not in good connect; the wiring is damaged; the output of the device connected to the input is improper.
3. Volume broken and breaking sound when turn loud
A, The power input is insufficient, confirm the wiring is correct first, and the supply current is sufficient,
B, The speaker itself has poor performance or damage, and the speaker power is too small or too large.
C, left and right channel speakers (+) (-) output are independent, can not be connected to each other
4. Speaker broken sound when subwoofer amplifier volume turn loud
A, The power input is insufficient, first confirm the wiring is correct, the supply current is enough
B, Whether the power of the speaker itself is too large or too small, or the bass performance of the speaker itself is poor; the structure of the speaker box; these abnormalities will cause breaks.
5.The volume power is not enough
Power and power supply voltage, the amplitude of the sound source signal, the size of the speaker impedance are all related, any kind of deficiency will affect the power
6. Will the amplifier be burnt
A, The positive and negative poles of the power supply are connected reversely; the power supply voltage is too high, exceeding the limit operating voltage of the board
B. If the board requires a DC power supply, it is not allowed to connect directly the AC transformer power supply (this can be rectified and converted to DC power before it can be used)
C. To confirm that the wiring is correct, then connect with the power supply. The wrong line connected or the short circuit both will cause damage to key parts.
Weight | 0.196 kg |
---|
Customers Also Viewed
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera Cleaning
$20.24Switch AccessoriesAdd to cartFeatures Cleaning Cloths– Extremely fine microfiber leaves zero scratches, streaks or marks. Safe for all surfaces and lenses. Lens cleaning pen – The soft brush retracts into the pen body to stay clean. Use the brush to dust off any particles and debris. Air Blower Cleaner – Direct a powerful stream of air to blow …
3 in 1 Digital Camera Cleaning Set for DSLR for Canon for Nikon Camera CleaningRead More
3V-9V DIY Shock Absorbed Smart Robot Tank Chassis Crawler Car Kit with 260 Motor
$52.64Smart Robot & Solar PanelAdd to cartNote:it is without shock absorbers and No damping wheelsSpecificationsMotor:260Votlage:3V-9VNet Weight:550gTrack Width:2.3cmSize:30cm*15cm*7.6cmNotes:This product without battery.Here is the GREEN version.Package Included1 x Smart Robot Tank Chassis Tracking Car
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor Module
$47.87Sensor & Detector ModuleAdd to cartFeatures– Package 2.5 mm x 2.5 mm x 0.93 mm metal lid LGA– Digital interface I2C (up to 3.4 MHz) and SPI (3 and 4 wire, up to 10 MHz)– Supply voltage VDD main supply voltage range:1.71 V to 3.6 V– VDDIO interface voltage range:1.2 V to 3.6 V– Current consumption:1.8 μA @ 1 Hz …
3pcs CJMCU-BME280 Embedded High Precision Atmospheric Pressure Altitude Sensor ModuleRead More
30Pcs Geekcreit Mini DC Adjustable Power Supply Buck Module Step Down Module
$28.42Power Supply ModuleAdd to cartDescriptionModule Properties:Non-isolated step-down module (BUCK)Rectification:Synchronous rectificationInput voltage:DC 4.75V-23VOutput voltage:DC 1.0V-17V (Adjustable, Output Output current:Rated current 1.8A (3A MAX, can not be prolonged)Output ripple:30mV (no-load)Dimension:17 x 11 x 4mm(L x W x H) / 0.67inch x 0.43inch x 0.16inch approxWeight:1g (per.)Package included30 x Mini DC-DC step-down adjustable module
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable Board
$152.19Sensor & Detector ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Features1. having a signal output instruction;2. with a TTL level signal, and the analog output signal;3. the output valid signal is high, the light goes out;4. the sensitivity is adjustable (fine-tuning);5. wide …
20pcs 801S Vibration Shock Sensor Control Module Sensitivity Adjustable BoardRead More
RF And Microwave DC Bias DC Feeder Module 10-6000MHz
$15.30Other Module BoardAdd to cartUse1. RF power supply of active antenna2. The output of the broadband amplifier is straight3 communication data injected through the RF sideWorking parameters1. Frequency range:10 – 6000MHz2. Insertion loss:0.3dB@512MHz 0.45dB@1575MHz3. Maximum voltage:50V4. Maximum current:500mA5. RF connector:SMA-K (outer screw bore)6. System impedance:50 ohms7. Dimensions:33mmx33mm without connectorWiring1.DC:external DC power supply2.RF:RF signal port (this port can only transmit …
RF And Microwave DC Bias DC Feeder Module 10-6000MHzRead More
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from Ecosystem
$30.36Electrical Relay & TimersAdd to cartFeatures1. E-ink screen home hygrometer, data can be clearly read in various brightness and angle. 2. High sensitivity and accurate sensirion from Switzerland, sense subtle change of temperature and humidity a breath away.3. 3 locating methods, melt in every scenes as long as you need it.4. An expression to spell over comfort level, cute and …
MMC E-ink Screen Digital thermometer Hygrometer Temperature Humidity Sensor from EcosystemRead More
Reviews
There are no reviews yet.