TPA3116D2 bluetooth 5.0 HIFI Digital Power Amplifier 2.1 High-power Board 12-24V Subwoofer Bass Board
$38.19
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:TPA3116D2 2.1 high-power HIFI digital power amplifier board
Chip type:TPA3116D2
Chip protection:overvoltage, undervoltage, overheating, DC detection and short circuit
Operating voltage range:DC 12-24V (current 4A or more)
Audio input sensitivity:500-800mV,
Frequency response range:20Hz-20KHz
Speaker Impedance
Left and right channel speakers:3.5-8 Ohm
Bass speaker Impedance:2-8 Ohm
The maximum output power:50W (left channel) +50 W (right channel) +100 W (subwoofer)
Maximum output power:100w (2 ohm speakers connected)
Number of channels:2-channel stereo
Size:101* 100 * 26mm
Packaging Included
1 x TPA3116 Digital Amplifier Board
Product Questions
1. Amplifier board has current sound and noise during use
Most of our amplifier board use DC power supply. The board itself does not produce current sound and noise.
The main causes of current acoustic noise are
A, The power supply filter used is not good; the current sound is caused by wrong input by the power or audio input.
B, The input signal quality is poor; the output of the device connected to the input is improper, and the noise is caused by the abnormal input of the audio source.
C, The input cable is of poor quality; the line is in poor connect; the wiring is damaged; the wiring is suspended
D, The input connection has other playback devices, and some devices share the power supply to cause noise.
2. No sound output, no sound in 1 channel
A, The speaker is broken, or the speaker cable is not connect well.
B, The input cable is not in good connect; the wiring is damaged; the output of the device connected to the input is improper.
3. Volume broken and breaking sound when turn loud
A, The power input is insufficient, confirm the wiring is correct first, and the supply current is sufficient,
B, The speaker itself has poor performance or damage, and the speaker power is too small or too large.
C, left and right channel speakers (+) (-) output are independent, can not be connected to each other
4. Speaker broken sound when subwoofer amplifier volume turn loud
A, The power input is insufficient, first confirm the wiring is correct, the supply current is enough
B, Whether the power of the speaker itself is too large or too small, or the bass performance of the speaker itself is poor; the structure of the speaker box; these abnormalities will cause breaks.
5.The volume power is not enough
Power and power supply voltage, the amplitude of the sound source signal, the size of the speaker impedance are all related, any kind of deficiency will affect the power
6. Will the amplifier be burnt
A, The positive and negative poles of the power supply are connected reversely; the power supply voltage is too high, exceeding the limit operating voltage of the board
B. If the board requires a DC power supply, it is not allowed to connect directly the AC transformer power supply (this can be rectified and converted to DC power before it can be used)
C. To confirm that the wiring is correct, then connect with the power supply. The wrong line connected or the short circuit both will cause damage to key parts.
Weight | 0.196 kg |
---|
Customers Also Viewed
MK1 Acrylic Remote Ver. Tony DIY Arc Reactor Lamp Kit Remote Control Illuminant LED Flash Light Heart Set
$70.86Engraving Parts & AccessoriesAdd to cartThe diaplay box and the bracket inchPROOF THAT TONY STARK HAS A HEARTinch is sold separately, please click that:ID:1429112The following chart shows different versions of our ARC reactor DIY model lamp, you can choose your favorite ones.ARC Reactor DIY Model Lamp Version:Please refer toMK1 Acrylic Frame Version:ID:1420733MK1 Aluminum Alloy Frame Version:ID:1434480MK2 Acrylic Frame Version:ID:1434467MK2 Stainless …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10V
$10.17Driver ModuleAdd to cartParametersSize:18.5 x 16 mmInput voltage:3-10VSingle H bridge output current:1.5A, can drive 2 dc deceleration motors.Built-in overcurrent protection, short circuit protection, undervoltage latching and overheating protection. Sleep mode with low power consumption.Purpose:drive dc motor and 4-wire stepping motor up to 1.5A.InstructionsULT low level is in sleep mode (need to disconnect J2 short welding spot behind the …
5pcs DC Motor Driver Board 2 Way DRV8833 Motor Drive Module DC 3-10VRead More
M5Stack ESP32 Open Source Faces Pocket Computer with Keyboard/Gameboy/Calculator Development Board
$177.66Smart ModuleAdd to cartIntroductionFACES Kit is a feast of functional panels, contains the most commonly used panels and keyboards with MEGA328 processor inside, communication protocol through IIC(0x08) as slave mode. With these 3 different panels, it will be very easy to support keyboard interaction with your M5Core.If you up for some classic video game, PyGamer panel plus M5Core …
10pcs 1S 3.7V 4A li-ion BMS PCM 18650 Battery Protection Board PCB for 18650 lithium Battery Double MOS
$13.12Battery Protection ModuleAdd to cartSpecificationsOvercharge detection voltage:4.25 ± 0.05VOvercharge release voltage:4.23 ± 0.05VOver discharge detection voltage:2.45 ± 0.1VUpper limit continuous current:4AOvercurrent detection current:5ACharging voltage:4.2VProduct Size:35 * 4 * 2.2MMIC components:DW01 + 8205A * 2 The main function:Overcharge protection, over discharge protection, short circuit protection, overcurrent protection.Wiring InstructionsB +:Connected to the battery positive.B-:Connected battery negative.P +:For the battery pack output …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run Capacitor
$4.04Module ComponentsAdd to cartFeatures1.Use polypropylene film with excellent electrical properties as the medium, and vaporize the metallized layer as the electrode under high vacuum conditions; 2.Use High-quality epoxy resin potting material is filled and sealed; the product has stable capacity, low loss, high pressure resistance, and good self-healing.3.Application:air conditioners, refrigerators, washing machines, electric fans, ovens, etc.SpecificationModel:CBB61Shell Material:ABSLine length:10cmShell …
CBB61 3Pcs 1.2UF Starting Capacitance 450V AC Fan Capacitor CBB Motor Run CapacitorRead More
Solar Charge Controller 15A LCD Display Controller Solar Controller for PWM Solar Power Panel Water Pump
$76.94Solar ControllersAdd to cart15A Controller For PWM Solar Panel Water PumpSpecificationMaterial:Acrylonitrile Butadiene Styrene (ABS)Color:BlackSize:14x9x3cmSystem voltage:12N/24V adaptiveUSB output:5V/2ACharging current:15ACharging voltage:13.7VRelease point cutoff voltage:10.7VWorking temperature:-20~+60°CFeaturesLCD displayPWM battery chargingAll necessary protections equippedAdjustable cotrolling parameter of the systemBuild-in industrial micro controllerBuild-in short-circuit protection, open-circuit protection, reverse protection,Over-load protection.Dual mosfet reverse current protection,low heat production.Application:Solar ControllerPackage include1 x solar controller
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger Modes
$12.31Relay ModuleAdd to cartDescriptionTime can be adjusted by a potentiometer to meet the use of most of your occasions.With Micro USB 5.0V power supply input, it is very convenient to use.5-30V ultra wide power supply voltage.Two trigger modes:external trigger and onboard buttons trigger.It has a relay suction indicator.Strong anti-interference ability, all kinds of interference under the relay will …
3pcs 5-30V 10A Wide Voltage Trigger Delay Relay Module Timer Module 2 Trigger ModesRead More
Reviews
There are no reviews yet.