HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
10Pcs 5V-30V Wide Voltage Trigger Delay Timer Relay Conduction Relay Module Time Delay Switch
$48.30Relay ModuleAdd to cartDescriptionWide voltage 5V-30VTime can be adjusted via a potentiometer, meeting your most occasionsMicro USB 5.0V power supply with input, easy to use5–30V wide supply voltageExternal triggering and onboard buttons Two triggering methodsWith a relay pull-in indicatorInterference ability, under various interference will not malfunction relay for industrial control.Module features1. Working voltage:Wide voltage any voltage between 5-30V, …
110-220V 150W Foldable Electric Cloth Hanger Travel Heating Dryer Drying Rack
$46.56Switch AccessoriesAdd to cartFeatures1. 3-hours fast drying. Use clothes to form a wind hood, so that the hot air flow gathers inside the clothes and circulates to achieve the purpose of fast drying.2. Dual mode, cold and hot air switching. It will automatic conver to cold air after 3h hot air drying.3. PTC heating, low power consumption, safe …
110-220V 150W Foldable Electric Cloth Hanger Travel Heating Dryer Drying RackRead More
20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper
$19.08Bottles & JarsAdd to cartDescription20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid Dropper SpecificationsMaterial:PECapacity:10mlSize:20X77mm / 0.79X3.0 inchNeedle Size:Inner Diameter =0.8mm, Outer Diameter =1.2mm, Length=12mmQuantity:20 pcsFeatures1. 10ml empty plastic bottle with metal needle2. Metal needle design,durable and easy to use3. Ideal for storing E cig liquid,solvents, light oils , eye drops, saline, etc.Package included20 X 10ml Empty …
20Pcs 10ml Metal Needle Empty Plastic Bottle Shisha E Cig Liquid DropperRead More
3Pcs AC-DC 3.5W Isolated AC 110V / 220V To DC 3.3V 1A Switch Power Supply Converter Module
$19.93Power Supply ModuleAdd to cartDescriptionsThe power supply is isolated industrial grade built-in power module with temperature protection, overcurrent and short circuit full protection.FeaturesAC85 – 264V or DC110 – 370V wide voltage inputDC3.3V(+/ -1%) 1A isolated outputInput Current:0.5mA/115VAC 0.25mA/230VACInput surge current:10A (230VAC)Frequency range:47-63HzOperating Temperature:-30 – 70 →Relative humidity:20%- 90%Rated power:3.5WOutput efficiency:61%Module size:5.1*2.3*1.8cmPackage included3 x AC-DC 3.5W Isolated AC 110V / …
3Pcs AC-DC 3.5W Isolated AC 110V / 220V To DC 3.3V 1A Switch Power Supply Converter ModuleRead More
3Pcs XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck Converter
$16.35Boost & Buck ModuleAdd to cartSpecificationModule highlights:5A high power, high efficiency and low ripple with power indicatorModule Properties:non-isolated buck module (BUCK)Input voltage:8-36V (input please try not to exceed 38V)Output voltage:1.25-32V continuously adjustableOutput Current:0-5AOutput Power:75WOperating temperature:-40 to +85 degreesOperating frequency:180KHzConversion efficiency:up to 96%Load regulation:S (I) ≤0.8% (input 24V, output 12V, load varies from 1 ~ 4.5A measured)Voltage Regulation:S (u) ≤0.8% (output …
3Pcs XL4015 5A DC-DC Step Down Adjustable Power Supply Module Buck ConverterRead More
Reviews
There are no reviews yet.