HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
7L 2 Hole Plastic Fuel Oil Gasoline Tank Air Heater Diesel Car Caravan Motorhome
$56.69Solar CollectorsAdd to cartFeature1. Made of thick and durable plastic.2. 7L large capacity, suitable for for cars / truck air diesel parking heater.3. Fuel level can be noticed by the plastic box.4. Easy to use.Specifications1. Name:7L Fuel Oil Gasoline Tank2. Model:D303633. Color:White & Blue4. Capacity:7L5. Size:approx.39x22x8cm(HxWxD)6. Material:Plastic & MetalPackage Included1 x Fuel Oil Gasoline Tank1 x Screw Kit
3Pcs XKC-Y25-T12V Non-Contact Liquid Level Switch Stick Type Durable Level Sensor Module
$40.82Sensor & Detector ModuleAdd to cartParameterInput voltage:(InVCC) DC 5 ~ 24 VCurrent consumption:5mAOutput voltage(High level):InVCCOutput voltage (Low level):0VOutput current:1 ~ 50mAResponse time:500mSWorking temperature:0 ~ 100 degreeInduction thickness (Sensitivity) Range:0 ~ 20mmCommunication:RS485Humidity:5% to 100%Material:ABSWaterproof:IP67Package included3 x XKC-Y25-T12V Non-Contact Liquid Level Switch
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5V
$17.04Power Supply ModuleAdd to cart>>>Manual:Click here to openOverviewThe IB_LD-1W & IB_LS-1W series are specifically designed for power applications in distributed power systems on the board that require isolation from the input supply. This product is suitable for1) The input power supply voltage changes ≤ ± 5%;2) The isolation voltage between input and output is required to be ≤1000VDC;3) High …
3pcs IB0505LS-1W DC-DC 5V to 5V Isolation Power Supply Module input 4.75-5.25V Output 5VRead More
20pcs DC-DC 12V 3A Power Supply Module Buck Regulator Module 24V 18V To 12V Fixed Output Step Down
$43.40Power Supply ModuleAdd to cartSpecificationsInput voltage:14 – 26VOutput voltage:12VOutput current:3A (Max), the current should be controlled within 0.8A for working long hoursConversion efficiency:96% (Max)Output rippleOperating temperature:-40→ – 85→Dimension:22.3 x 17 x 4.2mm (L x W x H)Package included20 x DC-DC 12V 3A Power Supply Module
5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 Turn
$21.55Electronic Accessories & SuppliesAdd to cart5Pcs 3590S-2-103L 10K Ohm BOURNS Rotary Wirewound Precision Potentiometer Pot 10 TurnDescription1. Color:As Pictures2. Resistance:10k ohm3. Resistance Tolerance:±5%.4. Power:2W5. Working Temperature:1→±125→6. Size:L x Dia / 40 x 20mm / 1.57 x 0.78inch7. Diameter of Shank:5mm/0.19inch8. Life Hour:1000 Hours9. Rotating Life:1,000,000 timesPackage include5 x Rotary Wirewound Precision Potentiometers
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instal
$9.18Raspberry Pi & Orange PiAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.Installation steps1. Press and hold the corner of the acrylic on the left, and talk about installing the acrylic on the left to the acrylic on the back.2. Attach the acrylic film …
Transparent Acrylic Raspberry Pi 4B Case Box Support Cooling Fan instalRead More
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave Converter
$166.04InvertersAdd to cartFeatures– The inverter can convert DC12V to AC 110V.– Overload, over temperature, short circuit, low voltage, overvoltage protection.– Stable and precise output voltage.– Built-in cooling fan with low noise.– Comes with a car charger and a pair of alligator clip, convenient to use.– Perfect for TV, DVD player and other home appliances.SpecificationsColour BlackContinuous Output:3000 W …
Solar Power inverter 6000W Peak DC 12V To AC 110V Modified Sine Wave ConverterRead More
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote Control
$139.71Solar PanelAdd to cartFeatures– 80 LEDs High-brightness 3030 LED lamp beads, energy saving, even light, longer lasting.– Polycrystalline Solar Panel convert solar energy into electricity, more environmentally friendly.– ABS one-piece housing, high hardness, sealed and waterproof– Easy installation, maintenance-free dependable operation without the need for wiring or trench. Rustproof, waterproof aluminum heavy duty casing. – Please turn on …
23*47CM Waterproof 80 LED Solar Street Light 120 Degree with Remote ControlRead More
Reviews
There are no reviews yet.