HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
3Pcs NodeMcu Lua WIFI internet Things Development Board Based ESP8266 CP2102 Wireless Module
$33.62Smart ModuleAdd to cartDescriptionMaterial:Experimental Board + Mixed AlloyColor:BlackChip Module:CP2102Working Temperature:-40 → ~ +125 →Power Input:4.5V ~ 9V (10VMAX), USB-poweredDrive Type:Dual high-power H-bridge driverCurrent:continuous transmission ≈70mA (200mA MAX)StandbySize:(L)X(W)4.8X2.5cm/1.89inchX0.98inch(appr.)FeaturesA great set of tools to develop ESP8266.ESP8266 has IO Pin.ESP8266 full IO mouth leads directly download without resetting.Open-source, interactive, programmable, low cost, simple, smart, WI-FI enabled.Greatly speed up your IOT application …
3pcs 500W Thyristor Electronic Regulator Accessaries Dimming Speed Regulation with Switch Temperature Adjustment Knob Module
$13.41Motor PWM Speed ControllerAdd to cartSpecificationsPCB board size:3.2CM*3.3CMRated power:P=UI; 500W=220V*2.27AModel:500W dimming governor;Rated power:500W;Suitable for dimming speed control of AC motors, lamps, etc. above 100W and below 500W;NoteThis module is connected to the AC voltage of 220V, so be sure to pay attention to safety when debugging, to prevent the occurrence of electric shock accidents, the store is not responsible for …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree Protractor
$42.51Laboratory Thermostatic DevicesAdd to cartSpecificationsMaterial:Stainless Steel + PlasticSize Range:0-300mmMeasuring Range:0-360°Resolution:0.05°Accuracy:±0.3°Repeatability:0.05°Battery:1 * 3V CR2032 Lithium Battery (Built-in)Features ACCURATE & Fast:Calculating angles quickly and accurately, digital display clearly TWO SCALE DISPLAY:Both measure the angle and length, metric and imperial scale 360° MEASUREMENT RANGE:Stable locking function can lock the measurement at any angle INTELLIGENT & SAVE POWER:Automatically shut down after 6 minutes …
2 in 1 Folding Digital LCD Angle Finder Ruler Stainless Steel Ruler 360 Degree ProtractorRead More
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering Kit
$43.73DIY Electronic KitsAdd to cartDescriptionCircuit board size:7.7CMX6.1CM;Shell size:8.4cm*7.6CM*5.5CMWorking voltage:DC 5V (positive inside DC seat)Frequency modulation range:87MHZ-108MHZ;FM button:press the button once to 0.1MHZ, long press the FM button to continuously add and subtract;Weight:265GFunction:digital display frequency function, power off memory function, power saving function;Power-off memory function:After turning off the power, power on again to play the radio station before the power-off.Power …
WangDaTao TEA5767 Radio DIY Kit FM Digital Radio Electronic DIY Soldering KitRead More
LILYGO TTGO T-Watch Sensor Development Kit STEM Programming Educational Sensor Module Multiple Function Sensor
$216.66Smart ModuleAdd to cartSize ConversionInchesCentimetersPlease according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.More informationhttps://t-watch-document-en.readthedocs.io/en/latest/introduction/index.htmlhttps://github.com/Xinyuan-LilyGO/TTGO_TWatch_LibraryHardware SpecificationsChipset:ESP32, dual-core MCU, PMU power managementFLASH:QSPI flash 16MB / PSRAM 8MBSRAM:520 kB SRAMButton:power key, IO36Extended function:Reference enhanced version and sensor kitUSB to TTL:CP2104Modular interface:UART, SPI, SDIO, I2C, LED PWM, PWM, …
CCM5D DC 6V-30V 6A DC Motor Speed Controller LED Display PWM Variable Speed Regulator with Shell
$17.48Motor PWM Speed ControllerAdd to cartFeatures• CCM5D DC Motor Speed Regulator controls the speed of a DC motor by adjusting Pulse-Width-Modulated (PWM). • Large 0.56 inch 3-digit LED display numbers allow viewing under the most adverse conditions.• The display range of 3-digit LED display is “000 Inch-“100 Inch. ( For example, displayed “60 Inch, it means that the PWM output …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle Glassware
$73.55Laboratory BottleAdd to cartDescriptionTransparent Detachable Pipe Bottle for Eliminating Unwanted Odors and HarmSpecificationColor:ClearJoint Diameter:14 mmHeight:355 mm/14inchMaterial:High Borosilicate GlassFeatures1. Convenient to carry.2. Attractive appearance.3. Reusable and easy to clean.4. Help eliminate unwanted odors from your finger tips.5. Made from borosilicate glass for the smoking experience.6. Allow you to enjoy the full flavor of your smoke while reducing the tar …
Clear BorosilicateGlass Pipe Detachable Glass Pipe Bottle GlasswareRead More
Reviews
There are no reviews yet.