HW-M543 DC12V~24V/AC220V intelligent Digital Display Temperature and Humidity Controller
$46.56
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Name:Digital Display Temperature and Humidity Controller
Brand:HW
Model:HW-M543
Control type:temperature and humidity
Working Voltage:DC 12V~24V/AC 220V
Output capacity:maximum 10A
Measurement object:air, water
Temperature range:-20~60 →
Temperature measurement error:÷0.1 →
Humidity range:0-100 %RH
Humidity measurement error:0.2 %
Installation type:Embedded
Dimensions:105*70*38 mm
Hole size:81*57 mm
Weight:About 154g
Package included
1 x Temperature and Humidity Controller
Setting instructions
1. Correctly connect the power supply and the temperature and humidity control equipment according to the wiring diagram, pay attention not to connect the temperature and humidity control equipment wrongly. When connecting the DC12~24V power supply, you must distinguish the positive and negative poles. AC220V does not divide the zero live wire.
2. Stop temperature setting
Press the set button (SET), when the red screen number starts to flash, press the up and down buttons to adjust and set the stop temperature you want; after setting, wait for 10 seconds without operation, the system automatically saves the data.
3. Heating or cooling mode setting
Long press the up button, when the red screen displays C-0, press the set button to enter the C-0 mode setting, press the up and down buttons to switch between the blue screen L and H, L stands for heating, H stands for cooling. (Note:The temperature control load you connect to at L must be a heating device, and at H, the load you connect must be a refrigerating device.) After setting, wait 10 seconds, the system automatically saves the data.
4. Temperature difference setting
Long press the up key, when the red screen shows C-0, press the up and down keys to switch to the C-1 temperature difference setting, press the setting key again to enter the temperature difference setting, and then press the up and down keys to adjust the setting you want Temperature difference value; wait 10 seconds after setting, the system automatically saves the data. (If the stop temperature is set to 35C, the mode is set to L heating mode, and the temperature difference is set to 5, then the start temperature is 35-5=30C and the temperature control range is between 30~35C. On the contrary, if the mode is set to H cooling mode , Then the starting temperature is 35 + 5=40C, and the temperature control range is between 35~40→)
5. Temperature calibration
Long press the up button, when the red screen displays C-0, press the up and down buttons to switch to the C-2 temperature correction mode, press the setting button once to enter the correction mode, and then press the up and down buttons to adjust and set the difference you want If the actual temperature is 28C and the probe detection temperature is 28.2C, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system will automatically save the data.
6. Stop humidity setting
Press the set button (SET), the red screen numbers start to flash, press the set button again to switch to the blue screen numbers flashing, and then press the up and down keys to adjust and set the stop humidity value you want; after setting, wait for 10 without operation Seconds, the system automatically saves the data.
7. Humidification or dehumidification mode setting
Long press the adjustment key, when the red screen displays H-0, press the set key to enter the H-0 mode setting, press the up and down keys to switch between the blue screen L and H, L stands for humidification, H stands for dehumidification. (Note:The humidity control load you connect to at L must be a humidifying device, and at H, the load you connect to must be a dehumidifying device.) After setting, wait 10 seconds, and the system automatically saves the data.
8. Humidity difference setting
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-1 humidity difference setting, press the setting key to enter the humidity difference setting, press the up and down keys to adjust the setting you want After setting the difference, wait 10 seconds, the system automatically saves the data. (If the stop humidity is set to 50%RH, the mode is set to L humidification mode, the humidity difference is set to 5%RH, then the start humidity is 50-5=45%RH, and the humidity control range is between 45-50%RH, on the contrary If the mode is set to H dehumidification mode, then the starting humidity is 50 + 5 = 55%RH, and the humidity control range is between 50~55%RH)
9. Humidity calibration
Long press the adjustment key, when the red screen displays H-0, press the up and down keys to switch to the H-2 humidity correction mode, press the set key once to enter the correction mode, press the up and down keys to adjust the set difference; such as actual humidity It is 56%RH, the humidity detected by the probe is 56.2%RH, then the correction difference can be set to -0.2; if the detection temperature is low, the correction difference can be adjusted higher. After setting, wait 10 seconds, the system automatically saves the data.
CodeNamePredetermined areaDefault parameters
H-0Mode settingL:Humidify H:DehumidificationL:Heating mode
H-1 Humidity difference0.1-50%RH10%RH
H-2Humidity calibration-10 and 10%RH0.0%RH
10. Restore factory settings
Press the up and down keys at the same time for 5 seconds, when the screen displays 888, the factory restoration is complete.
Weight | 0.132 kg |
---|
Customers Also Viewed
5V DC 2A 8 Channel Solid State Relay Module
$34.38Relay ModuleAdd to cartFeatures1. 5V solid state relay 240V 2A, output with resistive fuse 240V 2A2. Size:105mm*55mm*24mm (length*width*height)3. Weight:69g (net weight)4. Input power:5V DC (5. Trigger signal voltage:Low level:0-1.5V state low level, Relay ON / High level:2.5-5V state high level, Relay OFF6. The blue KF301 terminal is more convenient for connecting the control linePackage includes1 x 8 Channel …
Plant Cover Vegetable Flower Protector Net insect Barrier Greenhouse Mat
$48.59PlasticsAdd to cartThe crop tunnel net is easy to use, easy to move, and easy to store.Protects against UV rays, maintains humidity and warmth, while preventing frost, bad weather, and pests. E-Tunnel can also be used to heat the soil before planting.Ideal for winter and early spring vegetablesSpecificationMaterial:PE/PPColor:transparentDimensions:2x5m/6.6×16.4ftFeature1. This simple tunnel opens like an accordion. You can …
Plant Cover Vegetable Flower Protector Net insect Barrier Greenhouse MatRead More
50pcs 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge integrated Module
$83.01Boost & Buck ModuleAdd to cartFeatureInput voltage:4.5-8VOutput voltage:continuous adjustable 4.3-27V (Counter clockwise to boost voltage)Charging voltage:4.2V Charging current:up to 1ADischarge current:the maximum 2AOutput reference maximum current:5V 1.4A, 9V 0.8A, 12V 0.6AQuiescent current:about 0.5 mAOvershoot protection:YesOver discharge protection:None (also can be said yes, because 2V cut-off boost but does not block the output, output has 2V)Deadline boost:2V, depending on whether added …
2 Sets Luggage Suitcase Replacement Wheels OD 43 ID 6 W 18 Axles 30 Repair Tools
$22.67RubbersAdd to cartSpecificationColour:BlackMaterial:rubber, metalBearing diameter:21mmInner Bearing diameter:8mmWheel diameter:43mmWheels Thickness:17mmAxles lengh:37-44mmFeatures1. Wear, mute, load-bearing, double bearing, rotating flexible.2. Sliding effort, without effort, than the original luggage wheels are easy to use.Package Included2 sets of Luggage Suitcase Replacement Wheels (2 Wheels, 2 Axles, 2 Axles screws, 4 Washers, 2 Wrenches, 2 Axles, 2 Axles screws,4 Washers, 2 Wrenches)
3Pcs JQ6500 Voice Sound Module USB Replace one To 5 Way MP3 Voice Standard 16M
$19.68Other Module BoardAdd to cartFile download:http://myosuploads3.hobbyant.com/products/20181029/20181029223651SKU754170.rarDescriptionJQ6500 is a serial chip to provide MP3, the perfect integrated MP3, WMV hard decoding. At the same time software support TF card driver, support the computer directly update spi flash content, support FAT16, FAT32 file system. Through a simple serial command to complete the playback of the specified music, and how to play …
3Pcs JQ6500 Voice Sound Module USB Replace one To 5 Way MP3 Voice Standard 16MRead More
Reviews
There are no reviews yet.