1S 18650 3.7V Lithium Battery Protection Board 4.2V Charging Voltage Short-circuit and Overcharge Protection
$3.02
Type With nickel sheet Model 1S-4012A / Type With nickel sheet Model 1S-5025 / Type Without nickel sheet Model 1S-5020 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Model:HXYP-1S-5025
Size:50*25*3.5mm
Maximum operating current:24A
Upper limit instantaneous current:42A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:4.2V
Short circuit protection:can protect, delay automatic recovery
Model:HXYP-1S-5020
Size:50*20*3.5mm
Maximum operating current:16A
Upper limit instantaneous current:34A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:3.7-3.9V
Short circuit protection:can protect, delay automatic recovery
Mode:HXYP-1S-4012A
Size:40*12*3.5mm
Upper operating current:12A
Upper transient current:17A
Overcharge voltage range:4.28÷0.05V
Overdischarge voltage range:2.4÷0.05V
The static current:Less than30uA
Charging voltage:4.2V
Short circuit protection:Protected,delayed self – recovery
The main function
Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection.
Wiring instructions
B+ is connected to the positive electrode of the battery.
B- Connect the negative pole of the battery.
P+ is the positive input of the battery pack output
P- is the battery pack output and input negative
Package included
1 X 1S 18650 3.7V Lithium Battery Protection Board
Note
Lithium iron phosphate protection board cannot be used for hernia lights, electric drill battery packs, power tool battery packs, electric fish machine battery packs, vacuum cleaners, sweeper battery packs, electric bicycle battery packs, children’s car batteries, motors or with motors This kind of product, 1W fisheye LED light!
Precautions
1. Please pay attention to the use conditions of input and output voltage and load current so that the power consumption in the protection board does not exceed the allowable power consumption of the electrical parameters.
2. The load current should not work for a long time between the upper limit continuous working current and the overcurrent protection current.
3. When the battery is connected, it may not be able to discharge. In this case, the charger can be connected to the normal working state.
4. Although this protection board has built-in anti-static protection circuit, please do not touch the board with your hands when the electric protection board is working, so as to avoid static electricity to damage the protection board.
Weight | 0.011 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.