1S 18650 3.7V Lithium Battery Protection Board 4.2V Charging Voltage Short-circuit and Overcharge Protection
$3.02
Type With nickel sheet Model 1S-4012A / Type With nickel sheet Model 1S-5025 / Type Without nickel sheet Model 1S-5020 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Model:HXYP-1S-5025
Size:50*25*3.5mm
Maximum operating current:24A
Upper limit instantaneous current:42A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:4.2V
Short circuit protection:can protect, delay automatic recovery
Model:HXYP-1S-5020
Size:50*20*3.5mm
Maximum operating current:16A
Upper limit instantaneous current:34A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:3.7-3.9V
Short circuit protection:can protect, delay automatic recovery
Mode:HXYP-1S-4012A
Size:40*12*3.5mm
Upper operating current:12A
Upper transient current:17A
Overcharge voltage range:4.28÷0.05V
Overdischarge voltage range:2.4÷0.05V
The static current:Less than30uA
Charging voltage:4.2V
Short circuit protection:Protected,delayed self – recovery
The main function
Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection.
Wiring instructions
B+ is connected to the positive electrode of the battery.
B- Connect the negative pole of the battery.
P+ is the positive input of the battery pack output
P- is the battery pack output and input negative
Package included
1 X 1S 18650 3.7V Lithium Battery Protection Board
Note
Lithium iron phosphate protection board cannot be used for hernia lights, electric drill battery packs, power tool battery packs, electric fish machine battery packs, vacuum cleaners, sweeper battery packs, electric bicycle battery packs, children’s car batteries, motors or with motors This kind of product, 1W fisheye LED light!
Precautions
1. Please pay attention to the use conditions of input and output voltage and load current so that the power consumption in the protection board does not exceed the allowable power consumption of the electrical parameters.
2. The load current should not work for a long time between the upper limit continuous working current and the overcurrent protection current.
3. When the battery is connected, it may not be able to discharge. In this case, the charger can be connected to the normal working state.
4. Although this protection board has built-in anti-static protection circuit, please do not touch the board with your hands when the electric protection board is working, so as to avoid static electricity to damage the protection board.
Weight | 0.011 kg |
---|
Customers Also Viewed
Multiple Car Toys Magnetic Puzzle Box Book Educational Book Kids Learning Gift
$52.64MathematicsAdd to cartPackage included10 x Card76 x MagnetsFeatures1.Developing kids’ intelligence.2.Teaching kids to know more words.3.Easy for storage.SpecificationsColor:MulticolorMaterial:Paperboard, MagnetismSize:30x4x21.5cm
Basic Starter Kit UNO R3 Mini Breadboard LED Jumper Wire Button with Box for Geekcreit for Arduino – products that work with official Arduino boards
$18.62Module KitsAdd to cartDescriptionsPerfect for Shield Prototyping and TestingPlastic housing, metal contact clipsAccept wire with diameter 20-29AWGVolatge/current:300V/3-5A400 tie-point2 Power Lanes, Tie-point 1001 Double-strip, Tie-point 300Solderless Breadboard Size:82x55x8.5mmPackage included1 x Uno R3 Development Board1x 400 hole Breadboard10 x 220Ω resistor 5% carbon film10 x 1k resistor 5% carbon film10 x 10k resistor 5% carbon film10 x 100k resistor 5% …
3pcs ESP32-S WiFi + Bluetooth ESP32S Serial to WiFi Dual Antenna Module
$29.27Smart ModuleAdd to cartDescriptionThe main chip uses a low-power dual-core 32-bit CPU with a frequency of up to 240MHz and computing power of up to 600DMIPS.Default 32Mbit SPI Flash, 520KB SRAMSupport SoftAP and Station modeUltra-small 802.11b/g/n Wi-Fi + BT/BLE SoC moduleSupport UART/SPI/I2C/I2S/PWM/ADC/DAC, etc.Support for firmware upgrade (FOTA)Antenna supports onboard antenna or IPEX block outputPackage includes3 x Wifi module
Geekcreit 433MHz DC 12V 10A Relay 1CH Channel Wireless RF Remote Control Switch Transmitter with Receiver
$15.30Smart ModuleAdd to cartIf you need more Transmitter, please buy Product ID:1215079>>>Manual:Click here to openFeaturesEasy to install and easy to carryWith a slidable cover on the remote controlWith a hook on the remote controlUse Learning coding, stable and reliableThe wireless signal can pass through walls, floors and doorsYou can turn on or turn off the receiver with transmitter …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStream
$56.69Electrical Pump & ValveAdd to cartFeature*CO2 Refill Adapter is used to fill CO2 into your Sodastream tank.*Adjustable valve pin ensures compatibility with any cylinder valve variation.*Easy to install and use.*Made of high quality metal, high hardness and durable.Specification*Material:Metal*Color:Silver (As Pictures Show)*Inner Thread:TR21-4*Outer Thread:W21.8-14Package Contents1*CO2 Refill AdapterNotes:The real color of the item may be slightly different from the pictures shown on …
CO2 Refill Adapter Connector Kit W21.8-14 Thread Set for Filling SodaStreamRead More
30pcs 2.5-5.5V TTP223 Capacitive Touch Switch Button Self Lock Module
$15.15Other Module BoardAdd to cartFeatures 1. Size:15*11mm 2. Power:2.5-5.5V 3.Trigger setting mode:(1->Short;0->No Short) AB=00:No-lock High TTL level output; AB=01:Self-lock High TTL level output; AB=10:No-lock Low TTL level output; AB=11:Self-lock Low TTL level output; Package included 30 x 2.5-5.5V TTP223 Capacitive Touch Switch Button Self-Lock Module For
NE555 Pulse Module LM358 Duty and Frequency Adjustable Square Wave Signal Generator Upgrade Version
$6.55Test & Measuring ModuleAdd to cartFeature1. Used as a square wave signal generator to generate square wave signals for experimental development.2. Used to generate a square wave signal that drives the stepper motor driver.3. Generate adjustable pulses for use by the MCU.4. Generate adjustable pulses to control the associated circuitry.Description1. Size:3.5CM * 4.6CM1. The main chip:LM358;2. Input voltage:5V-12VDC.3. Input current:≥100MA;4. …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module Kit
$13.73DIY Electronic KitsAdd to cartFeatureModel:AUL-10Supply voltage:DC9V-12VAudio input:0~1.5VrmsPCB size:66 x 28mm (L x W)Light row size:62.5 x 5 x 10.7mm (L x W x H)Two indication modes:bar indication and fire spot indication (Realized by MOD short-circuit point)Lamp row offers two kinds of vertical and horizontal installationTin-treated solder padsNote:Before power on, please confirm the polarity of the power supply is correct …
3pcs LM3915 Level indicator Kit DC9V-12V DIY Electronic Production Module KitRead More
Reviews
There are no reviews yet.