1S 18650 3.7V Lithium Battery Protection Board 4.2V Charging Voltage Short-circuit and Overcharge Protection
$3.02
Type With nickel sheet Model 1S-4012A / Type With nickel sheet Model 1S-5025 / Type Without nickel sheet Model 1S-5020 /
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Model:HXYP-1S-5025
Size:50*25*3.5mm
Maximum operating current:24A
Upper limit instantaneous current:42A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:4.2V
Short circuit protection:can protect, delay automatic recovery
Model:HXYP-1S-5020
Size:50*20*3.5mm
Maximum operating current:16A
Upper limit instantaneous current:34A
Overcharge voltage range:4.28V÷0.05V
Over-discharge voltage range:2.40V÷0.05V
Quiescent current
Charging voltage:3.7-3.9V
Short circuit protection:can protect, delay automatic recovery
Mode:HXYP-1S-4012A
Size:40*12*3.5mm
Upper operating current:12A
Upper transient current:17A
Overcharge voltage range:4.28÷0.05V
Overdischarge voltage range:2.4÷0.05V
The static current:Less than30uA
Charging voltage:4.2V
Short circuit protection:Protected,delayed self – recovery
The main function
Overcharge protection, overdischarge protection, short circuit protection, overcurrent protection.
Wiring instructions
B+ is connected to the positive electrode of the battery.
B- Connect the negative pole of the battery.
P+ is the positive input of the battery pack output
P- is the battery pack output and input negative
Package included
1 X 1S 18650 3.7V Lithium Battery Protection Board
Note
Lithium iron phosphate protection board cannot be used for hernia lights, electric drill battery packs, power tool battery packs, electric fish machine battery packs, vacuum cleaners, sweeper battery packs, electric bicycle battery packs, children’s car batteries, motors or with motors This kind of product, 1W fisheye LED light!
Precautions
1. Please pay attention to the use conditions of input and output voltage and load current so that the power consumption in the protection board does not exceed the allowable power consumption of the electrical parameters.
2. The load current should not work for a long time between the upper limit continuous working current and the overcurrent protection current.
3. When the battery is connected, it may not be able to discharge. In this case, the charger can be connected to the normal working state.
4. Although this protection board has built-in anti-static protection circuit, please do not touch the board with your hands when the electric protection board is working, so as to avoid static electricity to damage the protection board.
Weight | 0.011 kg |
---|
Customers Also Viewed
3pcs 2x50W TPA3116 AUX+Bluetooth 5.0 HIFI High Power Digital Amplifier Stereo Board AMP Amplificador Home theater without Shell
$54.90Amplifier BoardAdd to cartSpecificationsAudio input:AUX+bluetoothWork voltage:9-24 DCPower:2*50WCooling fin:LargeSpeaker:4-8Ω;30-200WProtection:Overvoltage,undervoltageSize:84*52*24mmFeatures1. This product is full of materials, featuring high performance and high performance price, especially for HIFI music power amplifier with high power and high fidelity.2. TPA3116D2 is a type D amplifier IC launched by TI company, which has very high index parameters.The maximum modulation frequency is 1.2MHZ, and the high …
5PCS USB To TTL Debug Serial Port Cable for Raspberry Pi 3B 2B / COM Port
$20.44Raspberry Pi & Orange PiAdd to cartMore info and driver, please !!!Supports WIN XP/WIN7/ WIN8/ WIN10Reference to WIN10, you can !!!NoteNo driver on raspberry pi 3 model bRaspberry Pi main board is not included!Package included5x USB To TTL Debug Serial Port Cable For Raspberry Pi / COM Port
DIY LED Light Kit ONLY for LEGO 60197 Passenger Train Building Block Bricks Lighting
$32.79DIY Electronic KitsAdd to cartSpecificationInterface:USBColor:As the picture shownThe product is just a light kit, not included the model!!!FitmentONLY For LEGO 60197 Passenger Train Building Block Bricks ToyFeaturesEasy to install.LED powered by USB.Make your model more cool.Package Included1 x LED Light Kit(Model Not Included)
5Pcs M5Stack I/O Hub 1 to 6 Expansion Board Grove I/O interface for Blockly Development IoT MEGA328 Module for Arduino
$75.21Converter BoardAdd to cartDescriptionPbHUB, is a expander for singel-bus GROVE PORTB(Black port on M5GO Base). 1-to-6. PortB can be used as GPIO and analog in two data lines connected to GPIO36 and GPIO26 on ESP32. Same as PaHUB, it provides a solution for mutiple device control by PORTB. With PbHUB each of the IO can be configurated to …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPST
$20.86Electronic Accessories & SuppliesAdd to cart10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTDecriptionLatching type:Push it– on, push it again — offLED color:GreenSize(H*D):1.4 x 1cm / 0.55inch x 0.39inch (approx)Quantity:10 pcsFunction:MomentaryLED light voltage:3.2VSwitch voltage:12VMaximum operating current:20mAWith led light, with power symbol, light touch switchEasy to use and installNote1. Please check the picture and part number carefully …
10Pcs Green LED Power Symbol Momentary Latching Switch LED Light Push Button SPSTRead More
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA
$72.89ConnectorsAdd to cartName:(100) Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GA RedMaterial:Tinned CopperColor:RedShrinking Ratio:2:1Working temperature:-55℃~125℃Shrink temperature:80℃Solder melting temperature:138℃Complete solder melting temperature:160℃Cable cross-section:0.5mm-1.0 mmDiameter:3mm/0.12inch(appr.)FeaturesPlacement on Vehicle:Left, Right, Front, Rear.Solder and seal and with advanced waterproof function.Polyolefin tubing in outside and hot melt adhesive in inside.Can be ideal used in marine and automobile applications.Improve pullout strength, …
100Pcs Red Heat Shrink Solder Sleeve Seal Wire Splice Butt Connector AWG 22-18GARead More
Reviews
There are no reviews yet.