GT-24 Digital Wireless Module 2.4G NRF24L01 PA LNA industrial Grade 1100M Long Distance with Welding
$10.92
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
Model:GT-24
Module size:30.3 * 14.5mm (including PCB antenna)
Operating frequency band:2.4GHz ~ 2.525GHz (adjustable, 1MHz step)
Interface mode:1*8*1.27mm/2*4*2.54mm (The patch can also be used with the universal board and DuPont line)
Supply voltage:DC 2.0-3.6V (Note:above 3.6V, the module will be permanently damaged)
Communication level:0.7VCC ~3.3V (VCC refers to the module supply voltage)
Measured distance:1000m (clear open space, maximum power, height 2m, 250k air speed)
Transmit power:4 levels adjustable (maximum 20dBm, approx. 100mW at maximum power)
Air speed 250k ~ 2Mbps / 3 levels adjustable (250kbps, 1Mbps, 2Mbps)
Shutdown current:approx. 30uA (test condition:CE=0, power-down mode, VDD=3.0V)
Emission current:about 90mA (power supply capacity must be greater than 250m)
Receive current:about 20mA
Antenna form:PCB antenna / ipex carrier antenna
Communication interface:SPI maximum speed up to 10Mbps
Transmit length:Single packet 1~32 bytes Level 3 FIFO
Receive length:Single packet 1~32 bytes Level 3 FIFO
RSSI support:Not supported (only simple packet loss statistics are supported)
Receive sensitivity:-94dBm@250kbp
Working temperature:-40 ~ +85 °C (industrial grade)
Storage temperature:-40 ~ +125 °C (industrial grade)
Features
– The GT-24 module is a 2.4GHz, 100mW, high speed (up to 2Mbps airspeed), high stability, industrial grade wireless transceiver integrated data transmission module.
– The module comes with a high-performance PCB antenna, precise impedance matching, and the nRF24L01P RF chip, which has higher reliability, more power levels, and longer transmission distance and lower power than the nRF24L01.
– Also built-in RFX2401 power amplifier chip, built-in LNA, receiving sensitivity increased by 10dBm, working in the ISM band of 2.4GHz~2.5GHz.
– The module has sufficient transmit power, good spectral characteristics, small harmonics, small channel crosstalk, and ultra-small size. It is a model of all Murata raw materials and industrial grade standards.
– It has a standard spacing of 2.54mm in-line interface and 1.27mm patch interface, which is convenient for users to use with various circuits.
– The GT–24 module also comes with a built-in PCB antenna and an ipx carrier external antenna, which greatly enhances the module’s free characteristics and gives the user the greatest freedom.
Pin Instruction
Serial number:Name:Pin direction:Pin usage
1:VCC:/:Power supply must be between 2.0-3.6V
2:CE:input:Module control pin, see nRF24L01P Datasheet
3:CSN:input:Module chip select pin for starting an SPI communication
4:SCK:input:Module SPI bus clock
5:MOSI:input:Module SPI Data Input Pin
6:MISO:output:Module SPI Data Output Pin
7:IRQ:output:Module interrupt signal output, active low
8:GND:/:Ground wire, connected to the power reference ground
9:GND:/:Ground wire, can be used for patch fixing
10:GND:/:Ground wire, can be used for patch fixing
Package Included
1 x GT-24 Digital Wireless Module
Weight | 0.005 kg |
---|
Customers Also Viewed
5pcs TS-300B Turbidity Sensor Detection Module Water Quality Tester Washing Machine Turbidity Transduce
$43.93Sensor & Detector ModuleAdd to cartPrincipleTurbidity sensor TS-300B measures the turbidity (counter of suspended matter) in the wash water. Based on the optical principle, the sensor uses the light-emitting diode and phototransistor to receive the specific wavelength to measure the opacity or other substances of dirty water. concentration. By using phototransistors and light-emitting diodes, the light emitted by the sensor …
3Pcs USB Fan Speed Controller Module Reducing Noise Multi-stall Adjustment Governor DC 4-12V
$20.74Motor PWM Speed ControllerAdd to cartFeatures– USB Fan Air Conditioner – Strong winds and weak wind adjust freely – Stepless Speed Regulation – Suitable for the very common 5.0V USB fan on the market Regulation PrincipleThe non-adjustable fan is a 5V direct fan motor,while the two-stall fan is the interior has a step-up circuit board,when placed in the second gear,the …
5pcs JDY-08 BLE bluetooth 4.0 Serial Port Wireless Module Low Power Master-slave Support Airsync i Beacon
$45.12Smart ModuleAdd to cartFeaturesJDY-08 transparent transmission module is based on bluetooth 4.0 protocol standard, working frequency range is 2.4GHZ range, modulation mode is GFSK, large transmission power is 0db, large transmission distance is 80 meters, TICC2541 chip design is adopted, and users can modify device name by AT command. , service UUID, transmit power, pairing password and other …
ADC Module ADS1100 for Analog Signal Capture Converter Compatible M5StickC ESP32 Mini IoT Development Board Fi
$14.74Converter BoardAdd to cartnull Description ADC_HAT is another type of C-HAT specifically design for M5StickC controller. Same as ADC unit, this is an ADC converter component for stickc. Packed with an ADC converter chip ADS1100, which is a fully differential, 16-bit, self-calibrating, A/D converter. Extremely easy to design with and configure, the ADS1100 allows you to obtain precise …
5pcs Mini MP1584EN DC-DC BUCK Adjustable Step Down Module 4.5V-28V input 0.8V-20V Output
$8.94Power Supply ModuleAdd to cartSpecificationsModel:MP1584Name:DC-DC step-down moduleInput Voltage:4.5V ~ 28VOutput voltage:0.8V ~ 20VOutput Current:3A (Max)Conversion efficiency:96% (maximum)Output RippleSwitching frequency:1.5MHz (highest) typically 1MHzOperating Temperature:-45°C ~ +85°CSize:22mm * 17mm (L * W )Application areas:DIY mobile power, monitor power supply, power buggies, camera power supply, car power, communications equipment supply,etc.Packge included5 x Step Down Module
LILYGO TTGO T-Koala ESP32 WiFi and bluetooth Module 4MB Development Board Based on ESP32-WROOM-32 Micro USB
$26.23Smart ModuleAdd to cartFeatureEspressif official ESP32-WROOM-32 moduleLatest ESP32 version:REV14MB FLASHLithium battery interface, 500mA maximum charging currentCompatible with , MicroPythonDefault firmware:latest MicroPythoTechnical specificationsMicrocontroller:ESP-32Board power supply:(USB) 5VSupport battery:Lipo Battery 3.7VWorking voltage:3.3VFlash:4 MbytesLength:78 mmWidth:27 mmWeight:7.8 gramsPackage includes1 x ESP32 WiFi&bluetooth Broad2 x Pin
Reviews
There are no reviews yet.