5Pcs DC12V 10A 1CH 433MHz Wireless Relay RF Remote Control Switch Receiver
$20.40
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Specification
1.Input Voltage:DC10-14V
2.Standby Current
3.RF Frequency:433MHZ
4.RF Working mode:Super heterodyne receiver
5.Receiver Sensitivity:>90dBm
6.Remote Control Distance:>100 meter(In open environment)
7.Decoding Way:MCU Software decoding
8.Can store the number of remote control:50
9.Support remote control type:Fixed code, learning code
10.Channel:1CH
11.Multiple working modes:(Jog/Non-Latched ,inter-lock/Latched ,self-lock /Self-Latched,Delay off)
12.Wiring Method:Fixed wiring terminal
13.Working Voltage:DC12V
14.Output Current:10A
15.Rated load:10A 250VAC / 10A 125VAC
10A 30VDC / 10A 28VDC
16.Output:Normally open,Common,Normally closed
17.Dimension:3.5cm*3cm*1.6cm
Working/output way
1.Jog/Non-Latched:Press one button is Working /ON. Loosen your finger on the same button is Stop/OFF. One channel switch need one buttons remote control.
2.Self -lock/Self-Latched:Press one button for one time is working/ON. Press the same button again is stop/OFF. One channel switch need one buttons remote control.
3.Inter-lock /Latched:Press one button is working/ON, press another button is stop/OFF. One channel switch need 2 buttons remote control.
4.Delay:Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Description
1.Jog:Press the learning button then release, set the mode from the system automatically working mode to action mode, wait for a while, when the board LED off, said it is into the learning state, press the remote control, the system received the signal. The LED flashes 5 times and goes off again. After 3S delay, LED light marked learning success, the system automatically withdraw from the learning state.
2.Self-locking:Press the learning button, then release, press 2 times, the system automatically set to self-locking mode, wait for a while, LED off, it is into the learning state, press the remote control, LED flash 5 times Off. 3S after the delay, LED light learning success.
3.Interlock:press the learning button, then release, press 3 times in succession, the system is set to interlock mode.
4.Delay:Press remote control relay pull-in,release the remote control and begin timekeeping,after 5s,10s,15s will automatically close the relay
Package included
5 x 12V 1CH 433MHz Wireless Relay Switch Receiver
Weight | 0.085 kg |
---|
Customers Also Viewed
MSI.SDR Panadapter Kit Broadband Software Radio MSI.SDR Receiver 10KHz-2GHz Panadapter Module Compatible with SDRPlay RSP1 Software
$112.66Electronic Accessories & SuppliesAdd to cartDescriptionMSI.SDR is a powerful broadband full-featured SDR receiver.Covers frequencies from 10KHz to 2GHz. Just connect a PC and an antenna. The function of the receiver can be provided.Compatible with all SDRPlay RSP1 software. Compatible with popular SDR software platforms You can monitor up to 10 MHz of spectrum simultaneously. Enjoy all modes of operation. Small …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking Master
$30.17Other Module BoardAdd to cartProduct introductionThe JDY -18 transmission module is based on the bluetooth 4.2 protocol standard, the working band is 2.4GHZ, the debugging mode is GFSK, the maximum transmission power is 0dB, the maximum launch distance is 60 meters. The imported original chip is designed to support the user to modify the equipment name, service UUID, transmit …
5pcs JDY-18 bluetooth Module 4.2 High Speed Transmission BLE Mesh Networking MasterRead More
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine Model
$168.87PhysicsAdd to cartDescriptionFour Coil Brushless Fan Blade High-speed Turbine Hall Electric Machine Stirling Engine Model SpecificationName:Four Coil Brushless Motor Fan ModelCoil:Four Coil DesignPrinciple Design:Electromagnetic Induction, Mechanics, Hall Sensor.Size:155*125*150mmPower:8WWorking Voltage:12VSpeed:3000r/minAdapter Input Voltage:AC100-240V 50/60HzAdapter Output Volatage:DC12V 3AType:General motor:Hall electric motorDegree of loss:carbon brush,easily consumable:brushless,durableStructure:complex:simple easy maintenanceQuality:low:highTechnology integration:low:highWorking Life:short:longTheory1.Hall effect is a semiconductor sensor, under the action of loren magnetic …
4 Coil Brushless Motor Fan Blade High-speed Turbine Hall Electric Machine ModelRead More
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometer
$52.64Laboratory Thermostatic DevicesAdd to cartDescription* 3-1/2 digit LCD display, Max reading 1999.* Hand or Auto measuring range:0~100,000Lux.* LUX/FC Unit selection.* MAX and MIN Reading Hold Function.* Storage 50 datas and delay logging function(1 to 60 seconds selection).SpecificationsItem:Digital Lux meterModel:TA8131Brand:TASIMeasuring Range:100Lux, 1000Lux, 10000Lux, 100000Lux. (10/100/1000/10000 Fc)Resolution:0.1LuxAccuracy:±3% rdg ± 10dgts( ±4% rdg ± 10dgts(>10,000 lux)Total accuracy:for C.I.E standard illuminate A(2856K)Sample Rate:2times/SRepeatability:±2%Range …
TA8131 Digital Luxmeter illuminance Light Meter 100000Lux Lux/FC illuminometerRead More
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner Silvery
$51.62Electronic Accessories & SuppliesAdd to cartFeatures1. Low heat2. Good thermal stability3. Frequency and static capacitance consistency strong.4. Resonance impedance is low.5. The average length of life.6. It can be widely used in a variety of ultrasonic cleaning equipment.7. High performance:mechanical Q value, high vibration efficiency, high amplitude8. The full range (17KHZ-200KHZ), to meet the different needsParameterMaterial:Aluminum AlloyPower:100WResonant frequency:28 ± 0.5 …
Aluminum Alloy 100W 28KHz Ultrasonic Piezoelectric Transducer Cleaner SilveryRead More
10Pcs Mini DC-DC1.3A Voltage Converter Step Down Module 12V 24V to 5V 3.3V 9V with integrated inductor for 360 RC
$17.74Boost & Buck ModuleAdd to cartFeaturesThe maximum output current is 1.3A, and it is running within 1A for a long time;Non-isolated DC synchronous rectification with up to 94% conversion efficiencyOne-piece inductor, lower heat than ordinary shielded inductorUniversal, optional output voltage, spot welding directly on the boardOutput with LED indicator for easy and visual indication of voltage outputWith enable (EN) port, …
Reviews
There are no reviews yet.