M5StickC ESP32 PICO Color LCD Mini IoT Development Board Finger Computer + M5Stack PowerC HAT Design for M5StickC with IP3005 and IP5209 Power Bank Battery Charger Board
$65.60
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
This is without watch accessories,If you like with watch accessories
>>>with watch accessories:Click here to BUY
>>>More M5Stack Item:Click here to open
Description
M5Stick is a mini M5Stack, powered by ESP32. It is a portable, easy-to-use, open source, IoT development board.
What it can do This tiny block is able to realize your idea, enlight your creativity, and help with your IoT prototying in a very short time. It will takes away a lot of the pains form the development process.
M5stick is one of the core devices in M5Stack product series which is built in a continues growing hardware & software ecosystem. It has a lot of compatible modules & units, as well as the open source code & engineering community that will help you maximum your good in every step of the developing process.
Item Features
– 5V DC power supply
– USB Type-C
– ESP32-based
– 4 MByte Flash
– 6- IMU MPU6886
– Red LED
– Buzzer
– IR transmitter
– 1 Buttons, OLED(1.3 inch), 1 Reset
– 2.4G Antenna:Proant 440
– 95 mAh Lipo Battery
– Extendable Socket
– Grove Port
– Wearable & Wall mounted
– Development Platform UIFlow, MicroPython, for
ESP32 Features
– 240 MHz dual core Tensilica LX6 microcontroller with 600 DMIPS
– Integrated 520 KB SRAM
– Integrated 802.11b/g/n HT40 Wi-Fi transceiver, baseband, stack and LWIP
– Integrated dual mode Bluetooth
– Hall sensor
– 10x capactive touch interface
– 32 kHz crystal oscillator
– PWM/timer input/output available on every GPIO pin
– SDIO master/salve 50MHz
– card interface support
PinMap
RED LED & IR Transmitter & BUTTON A & BUTTON B
ESP32:GPIO10:GPIO9:GPIO37:GPIO39
RED LED:LED PIN
IR Transmitter:Transmitter Pin
Button A:Button Pin
Button B:Button Pin
TFT LCD
Driver IC:ST7735S
Resolution:80 * 160
ESP32:GPIO15:GPIO13:GPIO23:GPIO18:GPIO5
TFT LCD:TFT_MOSI:TFT_CLK:TFT_DC:TFT_RST:TFT_CS
GROVE PORT
ESP32:GPIO33:GPIO32:5V:GND
GROVE port:SCL:SDA:5V:GND
MIC (SPM1423)
ESP32:GPIO0:GPIO34
MICPHONE:SCL:SDA
6- posture sensor (MPU6886) & power management IC (AXP192)
ESP32:GPIO22:GPIO21
6- posture sensor:SCL:SDA
power management IC:SCL:SDA
Power on / off
Power on:Click the reset button
Shutdown:Double the reset button
datasheet
ESP32-PICO
ST7735S
BM8563
MPU6886
AXP192
SPM1423
Example
Comparision Between Different Development Kits of M5
For details click here
Download chart click here
M5StickC facory test code
M5StickC Vending Machine
Description
PowerC HAT is a charging module specially designed for m5stickc, with built-in ip3005 high-precision lithium battery protection IC and ip5209 power management IC. It uses I2C communication protocol to carry out data transmission with m5stickc of the host computer, and can check the voltage, current and other information through programming. The back battery seat of the module can be installed with two 16340 batteries, which can be charged by the charging module, and can also be used as a charging treasure to provide external power through the battery In addition, the module provides an I2C interface for connecting I2C peripherals, a typec interface for power input, a usb-a bus for power output, with a voltage output of 5V / 1.5A and an input voltage of 5V. The module is equipped with an independent switch, which can be opened once and closed twice.
Product Features
Battery testing
power bank
Battery charger
IIC Address 0x75
Weight & Dimension
Dimension:55mm x 35mm
Weight:19g
Package Included
1 x M5StickC
1 x USB Type-C cable
1 x PowerC HAT(include battery 2 * 750mAh)
Weight | 0.105 kg |
---|
Customers Also Viewed
5Pcs CP2102 USB To TTL/Serial Module Downloader
$21.98Converter BoardAdd to cart5Pcs CJMCU CP2102 USB To TTL/Serial Module UART STC Downloader For Driver Installation Introduction:http://forum.hobbyant.com/forum-topic-56275.html Description CJMCU-CP2102 its highly integrated, built-in USB2.0 full-speed function controller, USB transceiver, crystal oscillator, EEPROM and asynchronous serial data bus (UART), supports full-featured modem signal without any external USB devices. CJMCU-CP2102 works with other USB-UART adapter circuit similar to the driver …
10pcs 180 Degree USB 3.0 Type A female Socket Connector SMT Charging Socket Plug Connector
$10.11Terminal BlocksAdd to cartSpecificationsColorBlueRated Current1.5ARated Voltage30VInsertion Force35N MaxDurability3000 Cycles Min Rubber CorePBT / Icp Ul94V-0 Resistance To Voltage500V Ac Min. Insulation Resistance≥1000MΩPull-Out Force10N Min.Initial 8-20N AfterWorking Temperature-20 Degrees To 60 Degrees Contact Impedance≤30mΩTerminalsBrass C2680,Nickel Base,Gold-Plated 1 u,Package included-10pcs X 180Degree Connectors
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging Module
$13.11Other Module BoardAdd to cartFeature1. The onboard stable 8-bit MCU is used to generate high-resolution PWM signals with precise control.2. Support manual mode and return to medium mode, switch by button, with mode indicator.3. Support knob adjustment or serial command control in manual mode.4. The serial port command control can use the matching host computer software or connect to …
Dual Servos Knob Serial Port Control Board Futaba MG995 SG90 Steering Gear Debugging ModuleRead More
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital Signal
$4.36Sensor & Detector ModuleAdd to cartDescriptionThis sensor is fully compatible with ARDUI NO single-chip microcomputer, and its connection port is also compatible with Arduino sensor expansion board. It is mainly composed of a laser head, which is composed of a light-emitting tube core, a condenser lens, and a copper adjustable sleeve. After connecting to the power supply, we directly input …
Keyes Brick Laser Head Sensor Module (pad hole) with Pin Header Board Digital SignalRead More
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBm
$10.37Other Module BoardAdd to cartFeatures1. The product is small in size, high in sensitivity and strong in anti-interference ability;2. The same definition as the four-pin pin of RXB12, the usage is the same. The unit price is lower than RXB12 and can be directly replaced.Technical ParametersWorking voltage:DC3~5VTransmission rate:4.80KBPSQuiescent current:6mAReceive sensitivity:-105dBmDimensions:30 * 9 * 5mmWorking temperature:-20 ° C ~ +80 …
5pcs DC3~5V AK-119 433.92MHZ 4 Pin Superheterodyne Receiver Board without Decoding -105dBmRead More
150g Capacity Quartz Silica Melting Crucible Pot for Gold Silver Platinum Refine
$16.19Glassware KitAdd to cart150g Capacity Quartz Silica Melting Crucible Pot For Gold Silver Platinum RefineDescriptionMaterial:quartzCapacity:150gDiameter:43X57mm/1.69inch X2.24inch(ID*OD)Height:20mm/0.79inchDeepth:15mm/0.59inchNet Weight:40gFeatureQuartz silica melting crucibleProduced by modern ceramic processing technologyHigh orrosion resistance and strength,the temperature resistance up to 2800℃/5072FPerfect for gold silver casting and refine usagePackage included1X Quartz Silica Melting Crucible
WXD3-13-2W Precision Potentiometer 470R 470 Ohm Wirewound Multi-Turn Potentiometer
$4.50Module ComponentsAdd to cartSpecificationsResistance range:470┯Resistance tolerance:÷ 5%Rotation angle:3600 ÷ 20 Number of laps:10 lapsRated voltage:160VStarting torque:3.5 ~ 100mN.mRated power:2W (85 →) 0W (125 →)Linearity accuracy:÷ 0.3%Mechanical durability:10,000 weeksPackage included1 x Potentiometer
Reviews
There are no reviews yet.