10pcs 2CH Channel Optocoupler Isolation Relay Module 5V SCM PLC Signal Amplifier Board
$76.53
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Structural Features
1. Use Hongfa relay, stable and reliable performance;
2. Compatible with two input modes of positive control and negative control;
3. Each channel has an LED action indicator for a more intuitive understanding of product performance;
4. Each channel adopts optocoupler isolation to enhance anti-interference performance and isolation performance;
5. At the same time, the power supply and the ‘IN’ control terminal are independently controlled;
6. The module adopts the standard ‘DIN’ rail-type installation design, which is convenient and quick to install, firm and stable.
Technical Parameters
1. Trigger signal:DC5V
2. Each trigger signal current:5mA
3. Power supply voltage:DC5V
4. Each coil current:18.8mA
5. Contact type:one normally open and one normally closed (single pole)
6. Maximum load current of each contact:10A
7. Action time:below 12ms
8. Reset time:less than 4ms
9. Maximum switching frequency:18000 times / hour
10. Mechanical life:more than 20 million times
11. Relay installation:plug-in type (No)
12:Module installation method:DIN standard rail installation
Positive control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the negative voltage
IN1, IN2 are connected to positive voltage control, IN1 controls terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. K1, K2 means two relays work.
Negative control wiring introduction
1. Power input terminal
VCC is connected to the positive voltage, GND is connected to the negative voltage, and S / S is connected to the positive voltage
IN1, IN2 are connected to negative voltage control, IN1 controls terminal, IN2 controls K2 terminal
2. Control device output
The output terminal is clearly marked with 234, 3 is a common point, 2 is normally open, and 4 is normally closed. , K2 means two relays work.
Package includes
10 x Relay board
Weight | 0.86 kg |
---|
Customers Also Viewed
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019
$30.36ConnectorsAdd to cartSpecificationColor:As the pictures shownQuantity:6 PcsFitmentFor New Polaris Ranger XP 1000 3 SeaterFor Polaris Ranger and Polaris RS1For Polaris Ranger Crew XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)For Polaris Ranger XP 1000 EPS 2018 (Any Machine with Pulse Style Connector)Features– Easy to Install.– Fully sealed and weather proof.– Plugged right in and seals …
6Pcs Pulse Power Supply Plug Connector Pigtail for Polaris Ranger XP1000 & RS1 2018 2019Read More
900pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit / Housing / Pin Header JST Connector Wire Connectors Adaptor PH Kits
$21.69Electronic Accessories & SuppliesAdd to cartDescription2pin = 20 sets = 120pcs3pin = 20 sets = 120pcs4pin = 20 sets = 120pcsPin Connector Terminal:540 pcsTotal:60set(900pcs)Package included3 x 300pcs PH2.0 2p 3p 4 pin 2.0mm Pitch Terminal Kit
PortaPack H1 with TCXO Touch Screen for HackRF one 1MHz-6GHz SDR Receiver and Transfer Board AM FM SSB ADS-B SSTV Ham Radio Transceiver
$223.22Motherboard & Development BoardAdd to cartShell:Product ID:1566465FeatureNote:This version includes TCXO.WIKI:https://github.com/sharebrained/portapack-hackrf/wikiFAQ:Black screenSolution:The program is not burned, please install the program:to openThe PortaPack attaches to your HackRF and adds a touchscreen display, navigation controls, headphone jack, a real-time clock, and a micro SD card slot.Just add a USB battery, and yoursquore ready to explore the radio spectrum wherever you are. The PortaPack …
Yahboom Ultrasonic Module for Microbit Ranging
$15.35Smart Robot & Solar PanelAdd to cartIntroduction of Ultrasonic moduleMore info for you to download1.Working principleThe ultrasonic module is a sensor that uses ultrasonic characteristics to detect the distance. It has two ultrasonic probes for transmitting and receiving ultrasonic waves. The range of measurement is 3-450 cm.3-1 Ultrasonic emission and reception schematic(1) You need to input a high level signal of …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20M
$10.92Smart ModuleAdd to cartFeaturesEasy to operate which can fully turn on or turn off the whole circuit.With the capability of penetrating walls and anti-disturbance.Fast and easy installation, not obstructed by walls, capable of connecting any loadsRemote controller and switch can be used simultaneously for ease and flexibilityEquipped with high load relay,high voltage capacitor and high quality receiver.Apply electrical:Droplight, …
2 Channel Port 180-240V ON/OFF Wireless Digital Remote Control Light Wall Switch 20MRead More
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V Shield
$22.50Smart ModuleAdd to cartFeatureThe W5500 – Ethernet LAN Network Module can be used to provide your projects with internet connectivity. The W5500 module enables users to have Internet connectivity in their applications just by using the single chip in which TCP/IP stack, 10 / 100 Ethernet MAC and PHY embedded. Supports 8 independent sockets simultaneously.The W5500 Ethernet module …
W5500 Ethernet Module LAN Network Module with Logic 3.3V/5V ShieldRead More
2.4G NF-04 Wireless SPI Module BK2425 250k~2Mbps Transparent Transmission Receiver for Doorbell Remote Control Switch
$3.60Smart ModuleAdd to cartIntroductionNF-04 is a 2.4G wireless module with small size and on-board antenna. It has a high airspeed (up to 2Mbps), SPI interface, and a pure hardware module. It has high stability, high cost performance and good spectrum test characteristics. , small size, using all industrial grade components.NF-04 can be widely used in various Internet of …
Reviews
There are no reviews yet.