5pcs XY-P40W 40Wx2 Dual Channel bluetooth 5.0 Stereo Audio Power Digital Amplifier Board DIY Amplifier DC5-24V with Shell
$62.57
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Product NameBluetooth stereo audio power amplifier board
Product ModelXY-P40W
Supply voltageDC:5~24V
Bluetooth version5.0
Connect distance15 meters(visible)
Output modestereo
Output power(@1KHz)20W*2 @12V 4┯
30W*2 @16V 4┯
30W*2 @21V 8┯
40W*2 @24V 8┯
Speaker selected(30W~150W)4┯(5~16V supply)
8┯(5~24V supply)
protectionPower reverse protection
Short circuit protection
Thermal protection
NOTE:If supply power is low and output power is big, noise may be caused, turn down the volume and a bigger supply will be better
Operation
Supply the module, the blue LED is on, and it goes into Bluetooth mode;Waiting for pairing after playing the audio tone; Turn on phone Bluetooth,’XY-P40W’will be searched and display; Click the ‘XY-P40W’,it will connect to the board. It connects successfully with an audio tone; After this you can play the music. The power amplifier board will prepare for the next pairing with an audio tone, When the Bluetooth is disconnected.
Note
1. Keep 2 meters away from router to avoid WIFI interference
2. 5~24VDC is recommended; upper than 26V, it will be damaged.
3. Driving 4┯ load, power supply must be under 16V; and driving 8┯ load, supply must be under 24V.
4. The supply current must be 2A at least.
5. The cable connecting speaker with module should be within one meter.
6. ESD protection, please release ESD on your hands before you contact the module.
7. 40W and upper power speakers is recommended.
Fault Check
1. Check the power supply if the LED is not bright.
2. If the LED is on, but Bluetooth device ‘XY-P40W’is not searched, check if the router is in the near, and keep away from the router.
3. The speaker tapped when power on.
Check that the speaker load is so small that the current through the speaker is enough for chip goes into DC protection. Try to lower the supply and restart.
Check that if the power supply is low that cannot drive the speaker. 2A power supply current is ok.
4. Floor noise in speaker when playing
Play another music to verify the noise is not related with music itself.
Replace the speaker to check If the noise is caused by speaker itself.
Replace the power supply to check If the noise is caused by unstable power.
5. It plays intermittently
Check if the temperature of the board is high, and it goes into thermal protection.
Check if the Bluetooth is unstable, adjust the angle between the connected device; And Check if a WIFI source is in the near.
Package Included
5 x XY-P40W bluetooth 5.0 Stereo Audio Power Digital Amplifier Board with Shell(not included remote controller)
Weight | 0.13 kg |
---|
Customers Also Viewed
5pcs ESP-32S Matching Adapter Board WIFI bluetooth Module ESP-WROOM-32 Module for DIP
$9.84Smart ModuleAdd to cartFeaturesESP-32S supporting adapter board, 2.54mm pitch, lead RESET and IO 0 port, can be inserted into the breadboard, use DuPont wire leads, etc., to facilitate development and debugging.Package Included5 x ESP-32S Matching Adapter Board
5 Channel Flame Sensor Module Analog Dgital Dual Output Fire Extinguishing Robot Flame Alarm System Module
$13.11Sensor & Detector ModuleAdd to cartFeatures1.Using a five-way flame sensor design, the detection range is wide (the detection range of a common single flame sensor is about 30°, and the range is gradually reduced as the distance increases, the detection range of this product is greater than 120°)2.Can output digital signals (high and low level), easy to use3. can output …
600W Mini 2CH HiFi Digital Audio Stereo Amplifier Bass bluetooth FM Radio Amplifiering Equipment
$109.34Switch AccessoriesAdd to cartSpecificationsColor:BlueType:Support bluetoothInput voltage:220V-240V 50/60Hz 12V(in car)Plug:US plugRated power:80W+80WPeak power:300W+300WChannel:2 CHLoad impedance:4-16ΩSNR:>90 dbFM frequency:88-108MHzDistoration rate:0.05%Frequency:20Hz-20KHz(±3dB)Total harmonic distortion:less than 0.5% (normal operating conditions)Signal input sensitivity:200MV (±30MV)MIC input sensitivity:9mV (±2mV)Record level output:1VAuxiliary output level:1VSensitivity:0.25mV-220mVRC power supply:CR2052 battery(built-in)Features-Mini HIFI digital bluetooth audio power amplifier.-SD Card, U disk, MP3 format play, support bluetooth wireless connection.-Supports FM stereo radio.-Two microphone input …
Reviews
There are no reviews yet.