3pcs XY-P40W 40Wx2 Dual Channel bluetooth 5.0 Stereo Audio Power Digital Amplifier Board DIY Amplifier DC5-24V with Shell
$39.41
Shipping:Standard Shipping about 10-25 business days
Secure Payment:Paypal,VISA,MasterCard
Size Conversion
Inches
Centimeters
Please according to your own measurements to choose your suitable size. The tags inside the items will show in our Asian (Type) size.
Specifications
Product NameBluetooth stereo audio power amplifier board
Product ModelXY-P40W
Supply voltageDC:5~24V
Bluetooth version5.0
Connect distance15 meters(visible)
Output modestereo
Output power(@1KHz)20W*2 @12V 4┯
30W*2 @16V 4┯
30W*2 @21V 8┯
40W*2 @24V 8┯
Speaker selected(30W~150W)4┯(5~16V supply)
8┯(5~24V supply)
protectionPower reverse protection
Short circuit protection
Thermal protection
NOTE:If supply power is low and output power is big, noise may be caused, turn down the volume and a bigger supply will be better
Operation
Supply the module, the blue LED is on, and it goes into Bluetooth mode;Waiting for pairing after playing the audio tone; Turn on phone Bluetooth,’XY-P40W’will be searched and display; Click the ‘XY-P40W’,it will connect to the board. It connects successfully with an audio tone; After this you can play the music. The power amplifier board will prepare for the next pairing with an audio tone, When the Bluetooth is disconnected.
Note
1. Keep 2 meters away from router to avoid WIFI interference
2. 5~24VDC is recommended; upper than 26V, it will be damaged.
3. Driving 4┯ load, power supply must be under 16V; and driving 8┯ load, supply must be under 24V.
4. The supply current must be 2A at least.
5. The cable connecting speaker with module should be within one meter.
6. ESD protection, please release ESD on your hands before you contact the module.
7. 40W and upper power speakers is recommended.
Fault Check
1. Check the power supply if the LED is not bright.
2. If the LED is on, but Bluetooth device ‘XY-P40W’is not searched, check if the router is in the near, and keep away from the router.
3. The speaker tapped when power on.
Check that the speaker load is so small that the current through the speaker is enough for chip goes into DC protection. Try to lower the supply and restart.
Check that if the power supply is low that cannot drive the speaker. 2A power supply current is ok.
4. Floor noise in speaker when playing
Play another music to verify the noise is not related with music itself.
Replace the speaker to check If the noise is caused by speaker itself.
Replace the power supply to check If the noise is caused by unstable power.
5. It plays intermittently
Check if the temperature of the board is high, and it goes into thermal protection.
Check if the Bluetooth is unstable, adjust the angle between the connected device; And Check if a WIFI source is in the near.
Package Included
3 x XY-P40W bluetooth 5.0 Stereo Audio Power Digital Amplifier Board with Shell(not included remote controller)
Weight | 0.078 kg |
---|
Customers Also Viewed
DC 0-300V 500A Voltage Current Panel Meter Digital Blue Red Dual LED Voltmeter Ammeter with 500A/75mV Shunt
$48.10Electronic Accessories & SuppliesAdd to cartFeatures-2 in 1 function Voltmeter Ammeter, Easy install.-This meter test of Voltages and Amps, power supply can taken from the test circle, no additional power supply-Power supply DC 4.5V – 30V range (Attention:The maximum of input voltage cannot be exceed of 30V, otherwise would be burnt)-Display Range:DC 0V – 300V 0-500A (Please don’t exceed the …
3Pcs AC 220V 50A Power Amplifier Filter Power Supply Eliminate DC Power Filters for Toroidal Transformer
$28.05Module ComponentsAdd to cartProduct DescriptionThis product is connected in series with AC220V live wire. A 50A high-current rectifier bridge is used in series to eliminate the DC component more thoroughly.It can effectively eliminate the abnormal noise of the transformer caused by the DC component in the power grid (especially the sound of the toroidal transformer).Size:65MMX60MMx28MMType:Plug-in typePackage included3Pcs Filter …
5V WiFi Remote Garage Door Opener Controller Work with Alexa & IFTTT Google home Wireless Remote Control Switch
$21.86Smart ModuleAdd to cartNew toy for makers who want to build their own smart home system OverviewThe wireless switch supports inching /self-locking mode. You can add the device to the APP eWeLink to remote control connected home appliances or devices. In self-locking mode, you can remote turn on/off connected devices immediately. When in inching mode, you have two …
10pcs 3.7V 9V 5V 2A Adjustable Step Up 18650 Lithium Battery Charging Discharge integrated Module
$20.24Boost & Buck ModuleAdd to cartFeatureInput voltage:4.5-8VOutput voltage:continuous adjustable 4.3-27V (Counter clockwise to boost voltage)Charging voltage:4.2V Charging current:up to 1ADischarge current:the maximum 2AOutput reference maximum current:5V 1.4A, 9V 0.8A, 12V 0.6AQuiescent current:about 0.5 mAOvershoot protection:YesOver discharge protection:None (also can be said yes, because 2V cut-off boost but does not block the output, output has 2V)Deadline boost:2V, depending on whether added …
Reviews
There are no reviews yet.